LucidReleaseNotes

Differences between revisions 3 and 4
⇤ ← Revision 3 as of 2010-04-28 11:54:54 →
Size: 1673
Editor: 75-27-138-126
Comment:
← Revision 4 as of 2010-05-01 07:05:03 → ⇥
Size: 1865
Editor: p5098ed03
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
This page still needs to be filled with content by someone involved in Ubuntu on [[ARM]].
Line 4: Line 3:
For a start, some of the [[ARM/KarmicReleaseNotes|Karmic Release Notes]] may also apply to Lucid. For a start, some of the [[http://www.ubuntu.com/getubuntu/releasenotes/1004|Lucid Release Notes]] may also apply to Lucid.
Line 10: Line 9:
For the installation on a Freescale Babbage (2.x or 3.x) board see [[ARM/BabbageLucidInstall|Babbage installation instructions for 10.04]]
Line 21: Line 22:
For the installation on a TI OMAP3 C4 Beagleboard see [[ARM/Beagle|Beagle installation instructions for 10.04]]

Ubuntu "Lucid" 10.04 release notes for ARM

For a start, some of the Lucid Release Notes may also apply to Lucid.

All systems

  • The 2D Netbook Launcher interface was originally designed for touchscreens. Attempting to use the scrollbar on the side does not work as expected when using a mouse. To scroll through categories with more icons than will fit on the page, use the mouse to drag the window up and down. See 505974.

Freescale i.MX51 Babbage boards

For the installation on a Freescale Babbage (2.x or 3.x) board see Babbage installation instructions for 10.04

  • Suspend/Resume does not currently work on Babbage. See 571192.

  • Bringing down the eth0 interface with ifconfig will cause the system to hang. See 559065.

Marvell Dove boards

  • After installing the system, you may see many a text screen with errors that say "end_request: I/O error". However, this has not seemed to cause any installs to fail. Pressing 'enter' on this screen will reboot the system, but a message should have been displayed here warning you to remove the install media first. See 539027.

  • If you have speakers or headphones plugged into the headphone jack on the board, you will need to make some adjustments to hear audio. Under sound preferences, click the "Output" tab and select "Analog Headphones" for the connector. See 551249.

  • In the gnome sound recorder, recording into the .ogg format does not produce any audio. However, recording in a different format should work. See 563034.

TI OMAP3 Beagle boards

For the installation on a TI OMAP3 C4 Beagleboard see Beagle installation instructions for 10.04

  • Sound recording on Beagle does not work. See 568781

ARM/LucidReleaseNotes (last edited 2010-06-09 22:00:06 by 076-076-148-180)