Merlin
|
Size: 1199
Comment:
|
Size: 1432
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 17: | Line 17: |
| Since X-C1 SDP's are UEFI based, they can be installed using the same instructions as a typical UEFI server. Please refer to [[ARM/Server/Install/UEFI-ARM]] for further details. | Since X-C1 SDP's are UEFI based, they can be installed using the same instructions as a typical UEFI server. Please refer to [[ARM/Server/Install/UEFI-ARM]] for further details with the one caveat that the 14.04 installer can be found [[http://ports.ubuntu.com/ubuntu-ports/dists/trusty-updates/main/installer-arm64/current/images/generic/netboot/netboot.tar.gz|here]], otherwise the instructions are the same. |
Ubuntu 14.04 installation instructions for X-Gene™ X-C1™ (Merlin) Server Development Platform
Before You Begin
You will need the following:
- A management device for console access
- DHCP set up to provide Internet access (to access the Ubuntu package archive)
A TFTP Server accessible from the system
Boards should have following firmware components :
UEFI version: TianoCore 3.06.08-rc or newer
BMC Firmware : 4.21 or newer
NOTE: It is very important to ensure that systems are running with above recommended firmware levels for Ubuntu installation to work. Please contact your Applied Micro representative if you are unable to confirm or need help upgrading to the recommended firmware versions.
Ubuntu 14.04 Installation Instructions
Since X-C1 SDP's are UEFI based, they can be installed using the same instructions as a typical UEFI server. Please refer to ARM/Server/Install/UEFI-ARM for further details with the one caveat that the 14.04 installer can be found here, otherwise the instructions are the same.
ARM/Server/Install/Merlin (last edited 2016-08-31 21:24:17 by localhost)