Asus_P5LD2-VM

Differences between revisions 10 and 11
Revision 10 as of 2008-08-06 16:14:28
Size: 8663
Editor: localhost
Comment: converted to 1.6 markup
Revision 11 as of 2012-01-21 09:58:46
Size: 8656
Editor: jengelh
Comment: use iproute2
Deletions are marked like this. Additions are marked like this.
Line 26: Line 26:
2. If you can perform on a Terminal window (from Menu select "Applications\Accessories\Terminal"), an "ifconfig -a" command & you can get the following: 2. If you can perform on a Terminal window (from Menu select "Applications\Accessories\Terminal"), an "ip addr" command & you can get the following:
Line 209: Line 209:
dimitris@ubuntu:~$ifconfig -a dimitris@ubuntu:~$ ip addr

Asus Mobo Page:

http://www.asus.com/products4.aspx?l1=3&l2=11&l3=194&model=536&modelmenu=1

I have tested this Motherboard with the following OS:

1. Ubuntu v5.10 (Breezy Badger)

Note:

Unfortunately, I do not currently own this Mobo anymore to test with the newest Ubuntu OS version.

Conclusion:

The Motherboard works ok - except the LAN!

The LAN does not get auto-detected during installation & you have to install network drivers by yourself.

How To:

Install LAN Driver on ASUS P5LD2-VM Motherboard

Notes:

1. Reading this "How To" or this full Thread could probably help you how to setup "your" Motherboard's LAN - no matter what the brand, model or maker of the Motherboard! 2. If you can perform on a Terminal window (from Menu select "Applications\Accessories\Terminal"), an "ip addr" command & you can get the following:

eth0 ...blah... ...blah...
lo ...blah... ...blah...
sit0 ...blah... blah...

Seeing that the "eth0" part is already in there, means that your Network card is recognized by your Ubuntu! IF this is your case, do NOT bother to go on & install drivers for your Network card - you do NOT need them...

I could NOT see the "eth0" device & that is why I had to go on & install drivers for it... Typing commands you learned throughout this thread (many thanks to user "Pragmatist" - my "mentor" for all the nice things he has teached me), should NOT help - they did NOT help me... However, reading ALL this thread, should help you understand how things work, so if you want to learn more, "dive" in it... Besides, I have learned many things, thanks to my mentor!!!

So you want to perform the "Minimum" possible Commands Needed to make your ASUS Mobo - Model P5LD2-VM to have its LAN activated!

So, here is the "How To":

For Ubuntu v5.10 Breezy:

Note:

I assume that you have performed an Ubuntu clean/fresh Install. But it should NOT really matter, as long as you follow the instructions below...

Step 1:

You need to install the following Packages:

a. Using "Synaptic Package Manager", install:

1. build-essential 2. gcc-4.0 3. linux-headers-2.6.12-9-386_2.6.12-9.23_i386.deb 4. cpp-3.4_3.4.4-6ubuntu8.1_i386.deb 5. gcc-3.4_3.4.4-6ubuntu8.1_i386.deb

Notes:

1. I think #2 gets auto-installed by #1, you might want to verify this... 2. Above #4 & #5 means downgrading your "gcc-4.0" but this is a requirement if you want to compile the Intel's "e1000" LAN driver. I also thing that if you install #5, #4 gets auto-installed, you might want to verify this also...

OR: Alternatively:

b. Going independent & installing the packages one-by-one:

01. dpkg -i binutils_2.16.1-2ubuntu6_i386.deb 02. dpkg -i make_3.80-9_i386.deb 03. dpkg -i dpkg-dev_1.13.10ubuntu4_all.deb 04. dpkg -i gcc-4.0_4.0.1-4ubuntu9_i386.deb 05. dpkg -i linux-kernel-headers_2.6.11.2-0ubuntu13_i386.deb 06. dpkg -i gcc_4%3a4.0.1-3_i386.deb 07. dpkg -i libc6_2.3.5-1ubuntu12.5.10.1_i386.deb 08. dpkg -i libc6-dev_2.3.5-1ubuntu12.5.10.1_i386.deb 09-11: dpkg -i g++-4.0_4.0.1-4ubuntu9_i386.deb g++_4%3a4.0.1-3_i386.deb libstdc++6-4.0-dev_4.0.1-4ubuntu9_i386.deb 12: dpkg -i build-essential_11.1_i386.deb 13. dpkg -i linux-headers-2.6.12-9_2.6.12-9.23_i386.deb 14. dpkg -i linux-headers-2.6.12-9-386_2.6.12-9.23_i386.deb 15. dpkg -i gcc-3.4-base_3.4.4-6ubuntu8.1_i386.deb 16. dpkg -i cpp-3.4_3.4.4-6ubuntu8.1_i386.deb 17. dpkg -i gcc-3.4_3.4.4-6ubuntu8.1_i386.deb

Notes:

1. The above order of installation matters, so do NOT in any way change the order - or you will end up having some packages NOT installed & you will NOT be able to compile the "e1000" drivers. 2. The above Steps #9-#11 are co-dependent! This means that I can NOT choose an order of install - the MUST all be installed simultaneously (as one, or: all together). You could also do this for all the above packages but someone would NOT be able to read something like the following or easily spot the package names that are in fact installed, clearly:

dpkg -i binutils_2.16.1-2ubuntu6_i386.deb make_3.80-9_i386.deb dpkg-dev_1.13.10ubuntu4_all.deb gcc-4.0_4.0.1-4ubuntu9_i386.deb linux-kernel-headers_2.6.11.2-0ubuntu13_i386.deb gcc_4%3a4.0.1-3_i386.deb libc6_2.3.5-1ubuntu12.5.10.1_i386.deb libc6-dev_2.3.5-1ubuntu12.5.10.1_i386.deb g++-4.0_4.0.1-4ubuntu9_i386.deb g++_4%3a4.0.1-3_i386.deb libstdc++6-4.0-dev_4.0.1-4ubuntu9_i386.deb build-essential_11.1_i386.deb linux-headers-2.6.12-9_2.6.12-9.23_i386.deb linux-headers-2.6.12-9-386_2.6.12-9.23_i386.deb gcc-3.4-base_3.4.4-6ubuntu8.1_i386.deb cpp-3.4_3.4.4-6ubuntu8.1_i386.deb gcc-3.4_3.4.4-6ubuntu8.1_i386.deb

3. You could as easily create a nice "Script" file (if you know how to do this) & see all of the above run automatically (or auto-magically), without any fuss from your side... It is very easy, but I am not going to go through this here, cause it is going to take too long... (besides, 6 days for this was way too much for me too! - not to think about my "mentor" spending time with me...!)

Step 2:

You need to download the latest Intel "e1000" drivers.

The best site for this is the following:

http://sourceforge.net/project/showfiles.php?group_id=42302

(Many thanks to user "Pragmatist" for providing the above thread - as he were my "mentor" & Ubuntu "spiritual" guide throughout all this!!!)

Note:

In this "How To", I have downloaded & used the latest drivers - which now are "e1000-7.0.33.tar.gz". Download the latest drivers you can find, hopefully they should work too!!!

Step 3:

Unzip the driver you downloaded. I usually find it easier to "unzip" with the following way:

1. Right-click on your "e1000-7.0.33.tar.gz" file & select "Open with Archive Manager".

2. From the Standard Toolbar" click on the button named "Extract"

3. Under the "Extract in folder:" option, select "Desktop".

4. Click on the button named "Extract"

5. Close the "Archive Manager's" open window.

On your "Desktop" you should now see a folder named "e1000-7.0.33".

Note:

Others prefer using the "tar" command. Perform as you prefer - I prefer using a GUI compared to a Terminal environment.

Step 4:

We are now going to compile the downloaded "e1000-7.0.33" driver.

To do this, do the following:

1. Launch a Terminal window (from the Menu, select "Applications\Accesories\Terminal")

2. Type "sudo -i" & then type your user password to have "root" priviledges.

3. Type "cd /home/dimitris/Desktop/e1000-7.0.33/src", replacing "dimitris" with your username (the one you type during boot).

4. Type "make install" to Compile & Install your "e1000" driver.

Note:

When you have finished compiling the "e1000" driver, you will notice that there are ERRORS created..., like:

make: warning: Clock skew detected. Your build may be incomplete.

Simply ignore this ERROR if you get it... IF you get an error like:

Make file: 65: *** Linux kernel source not found. Stop.

that means, that you are missing some of the packages I told you to install!!! Go back to "Step 1a" or "Step 1b", find what packages you did NOT install & go ahead & install them!!! Only then, come back here & attempt again to "make install" (or compile) your drivers...

5. This is the MOST IMPORTANT PART: On your "Terminal" window, type

shutdown -r now

You must Shutdown & Restart your Ubuntu PC! No matter what other command suggested in this thread, IF you do NOT do this, NOTHING will work... You can play around with any command you wish, before shutting down & restarting..., but it did NOT work for me & I advise you NOT to, cause you will be waisting your time...

Note:

I do NOT know why this was SO important, but I guess it is a required step, if you want to make this work...

6. Now that you have Restarted your Ubuntu PC, launch a "Terminal" window (from the Menu, select "Applications\Accesories\Terminal") & type:

dimitris@ubuntu:~$ ip addr

eth0 ...blah... ...blah...
lo ...blah... ...blah...
sit0 ...blah... blah...

If you can see the "eth0" line, then your LAN is detected & you are ready to "Roll" - your drivers are installed & your card is ready to work!!!

You only need to play around with the LAN Card's configuration settings.

Good Luck!

P.S.> The original thread with this problem, can be found here: http://ubuntuforums.org/showthread.php?t=154532

Asus_P5LD2-VM (last edited 2012-01-21 09:58:46 by jengelh)