CommonProblemsInstall

Revision 7 as of 2006-06-17 11:55:16

Clear message

Note: This is work in progress. It aims to privide quick answers to common problems from the forums and irc chats. Hopefully it can be a useful reference, an one included in the main docs. It could become CommonProblemsGuideSpec.

Getting Ubuntu CDs

There are several ways to get Ubuntu install CDs.

  • Downloading CD images can be found at http://www.ubuntulinux.org/download/ If you have broadband this is a quick option.

  • ShipIt CDs Get free CDs sent to you https://shipit.ubuntu.com/ These are free official CDs, they can take a while to arrive.

  • Buy CDs Search the web for "cheap linux cds" May cost a few dollars per cd, usually quick to arrive.

You could also have a look at [:forum/GiveAway:] for people who are offering to send out ubuntu CDs

Burning the Install/Live CD

If you have downloaded the CD you will need to write it to a CD-R. Have a look at the BurningIsoHowto

The Install CD won't boot

Check that you burned the CD correctly, see the BurningIsoHowto

If you are using a PC check that your BIOS is set to boot from cd. Some older machines may not be able to boot from CD, these will need a boot floppy (see [:HowToMakeAGRUBBootFloppy: How To Make A GRUB Boot Floppy] )

If you are using an Apple Mac, hold down the 'C' key

The download may have been corrupted, try checking the md5sum, or re-downloading. Note: can someone write a [:HowToMD5SUM: HowToMD5SUM]

Disabling ACPI

Sometimes disabling acpi is needed for the install to work.

From the installer's boot prompt, enter

linux acpi=off

More disabling things to make stuff work

This page addresses more things like turning the acpi off.

https://wiki.ubuntu.com/BootOptions

In essence if it is a module it can be turned off, this is not always a good idea.

Hotplug Issues

Resolving problems with hotplug during install is discussed further here:

https://wiki.ubuntu.com/PaulsKludge

No monitor found-install stops

You will need to download the 'alternate' version iso and install in text mode. when it comes to configuring xserver-xorg options, you will need to know for your model:-

horizontal and vertical sync / display resolutions / hz it can run at

fresh install has weird networking problems

From personal experience with Debian and ubuntu Breezy and Dapper it is advisable to disconnect any networking ethernet cables.

While this could be isolated cases, the effects experienced of ethernet cable on fresh install are

1)ati grapics card not configured and install either hangs or you get text login as xserver-xorg not configured.

2)can access web with browser, but synaptic claims it can't down load known working repositories.

3)packages that would normally be installed damaged or missing.