DMA
2058
Comment: further work
|
2061
remove m from after DMA. I assume it was typp
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
DMA or Direct Memory Access is a feature that allows harddrives and CD/DVD drives to access the system memory. The most common sign of DMA not being enabled is jumpy DVD playback. | If you experience jumpy DVD playback, it may be because DMA is not enabled. DMA, or Direct Memory Access, lets hard drives and CD/DVD drives access the system memory. |
Line 3: | Line 3: |
'''Warning: Enabling DMA can be dangerous in some cases. Usually issues are directly related to faulty hardware, poorly written drivers, or using settings that are unsupported by your system. USING HDPARM INCORECTLY CAN CAUSE MAJOR DATA CORRUPTION AND/OR LOSS. Most systems newer than 3 years will support DMA.''' | '''Warning: Enabling DMA can be dangerous in some cases. Usually issues are directly related to faulty hardware, poorly written drivers, or using settings that are unsupported by your system. USING HDPARM INCORECTLY CAN CAUSE MAJOR DATA CORRUPTION AND/OR LOSS. Most systems newer than 3 years support DMA.''' |
Line 9: | Line 9: |
This tutorial assumes you are trying to enabled DMA on hdc, usually the CD-rom drive. | These instructions assume that you are trying to enable DMA on `hdc`, usually the CD-rom drive. |
Line 11: | Line 11: |
1. See the what the settings are on /dev/hdc | 1. See the what the settings are on `/dev/hdc` |
Line 16: | Line 16: |
1. Enable DMA on /dev/hdc | 1. Enable DMA on `/dev/hdc` |
Line 28: | Line 28: |
If your drives are configured in [Cable Select] mode and while running hdparm commands you receive erros related to timeouts or drive not ready, try changing the drive to be a master or slave device depending on your system configuration. This does require opening the case and as far as I know most drives are set to Cable Select from the manufacturer. | If your drives are configured in [Cable Select] mode and while running `hdparm` commands you receive errors related to timeouts or drive not ready, try changing the drive to be a master or slave device depending on your system configuration. This does require opening the case and as far as I know most drives are set to Cable Select from the manufacturer. |
Line 31: | Line 32: |
If you experience jumpy DVD playback, it may be because DMA is not enabled. DMA, or Direct Memory Access, lets hard drives and CD/DVD drives access the system memory.
Warning: Enabling DMA can be dangerous in some cases. Usually issues are directly related to faulty hardware, poorly written drivers, or using settings that are unsupported by your system. USING HDPARM INCORECTLY CAN CAUSE MAJOR DATA CORRUPTION AND/OR LOSS. Most systems newer than 3 years support DMA.
Enabling DMA
To enable DMA, you need to use the hdparm}} command and the configuration file {{{hdparm.conf.
These instructions assume that you are trying to enable DMA on hdc, usually the CD-rom drive.
See the what the settings are on /dev/hdc
sudo hdparm /dev/hdc
If you get a line like using_dma = 1 (on), DMA is already enabled. Skip to step 4 to see if it has been enabled at boot time.
Enable DMA on /dev/hdc
sudo hdparm -d1 /dev/hdc
You have now enabled DMA for the drive. However, in order for the settings to be automatically applied at boot there you need to edit the /etc/hdparm.conf} script. Add the following to the end of your hdparm.conf
/dev/hdc { dma = on }
Troubleshooting
If your drives are configured in [Cable Select] mode and while running hdparm commands you receive errors related to timeouts or drive not ready, try changing the drive to be a master or slave device depending on your system configuration. This does require opening the case and as far as I know most drives are set to Cable Select from the manufacturer.
Further reading
The hdparm has a further options that may be more risky. They can be seen using the man hdparm command in the terminal.
For a detailed description of DMA visit the IEEE http://standards.ieee.org/reading/ieee/std_public/description/busarch/1212.1-1993_desc.html
IDE, EIDE and UDMA http://www.spcug.org/reviews/bl0108.htm
DMA (last edited 2008-08-06 16:20:37 by localhost)