Introduction

This page describes how to debug issue with IDE harddrives, CDROM and DVD drives.

Chances are that if you have newer hardware and are running a newer distribution, you are using the ata_piix module.

Debugging procedure

Temporary

• On power on, press 'Escape' to get the Grub boot menu
• Add the following kernel command line parameters at the end

{{{break=top, modprobe ide_generic all_generic_ide=1 }}}

• To do this press e to edit then go down to kernel and press e again. When done adding press ESC to go back and then b to boot with this option.

Permanent

To make this persistent you can edit the grub config file as root such as gksudo gedit /boot/grub/menu.lst

Caveats

Also see:

• DebuggingProcedures

CategoryBugSquad