DebuggingInstallationIssues

Differences between revisions 24 and 25
Revision 24 as of 2009-12-26 20:23:40
Size: 12508
Editor: roa76-3-82-225-116-110
Comment:
Revision 25 as of 2009-12-28 19:04:45
Size: 12444
Editor: roa76-3-82-225-116-110
Comment:
Deletions are marked like this. Additions are marked like this.
Line 248: Line 248:
https://bugs.edge.launchpad.net/ubuntu/+source/apt/+bug/349469

Debugging Central

This page is part of the debugging series — pages with debugging details for a variety of Ubuntu packages.

Introduction

This page lists some general issues that users might encounter while performing updates of their system. Apport will usually detect these failures and file a bug in Launchpad. These bugs can be identified by the bug tag 'apport-package' and can occur on nearly any package.

There are usually log file attached to the report which differs depending on the kind of install/upgrade:

  • Package install/upgrade: DpkgTerminalLog

  • Distribution upgrade: VarLogDistupgradeMain and VarLogDistupgradeApttermlog

Detailed informations about debugging updatemanager can be found at DebuggingUpdateManager.

Documented below are the most commonly reported issues. For each case there is a description and a sample report and when applicable there is a workaround or fix and the master report it should be marked a duplicate of.

Known issues

Corrupted package archive

These errors indicates a corrupted archive (.deb or files on disk) The root cause of the corruption may be a bad network connection, faulty hardware, hardware shutdown,...

For those report the common workaround and stock response is:

Thank you for taking the time to report this bug and helping to make Ubuntu better. It seems that there was an error caused by a corrupted archive. Please execute the following commands, as it will clear your package cache, in a terminal ( Applications -> Accessories -> Terminal ) :

sudo apt-get clean
sudo apt-get update

Then try performing the update again. This will likely resolve your issue. If so please set the bug's status to Invalid. Thanks in advance!

Not a Debian format archive

  • Bug : provide a master report

This error indicated that the header of the .deb archive is not recognized as a valid debian format.

dpkg-deb: `/var/cache/apt/archives/libswscale0_4%3a0.5+svn20090706-2ubuntu2_i386.deb' is not a debian format archive 
dpkg: error processing /var/cache/apt/archives/libswscale0_4%3a0.5+svn20090706-2ubuntu2_i386.deb (--unpack): 
 subprocess dpkg-deb --control returned error exit status 2

Corrupted filesystem tarfile

Unpacking libaccess-bridge-java (from .../libaccess-bridge-java_1.24.0-0ubuntu2_all.deb) ...
dpkg: error processing /var/cache/apt/archives/libaccess-bridge-java_1.24.0-0ubuntu2_all.deb (--unpack):
 corrupted filesystem tarfile - corrupted package archive
dpkg-deb: subprocess paste killed by signal (Broken pipe)

--fsys-tarfile

  • Bug : provide a master report

Unpacking replacement audacity-data ...
dpkg-deb: subprocess paste killed by signal (Broken pipe)
dpkg: error processing /var/cache/apt/archives/audacity-data_1.3.7-2ubuntu1_all.deb (--unpack):
 subprocess dpkg-deb --fsys-tarfile returned error exit status 2
Processing triggers for man-db ...
Errors were encountered while processing:
 /var/cache/apt/archives/audacity-data_1.3.7-2ubuntu1_all.deb

short read - Input/output error

  • Bug : provide a master report

This either indicates no space left on hard disk, a faulty device or a corrupted archive.

Unpacking linux-image-2.6.27-11-generic (from .../linux-image-2.6.27-11-generic_2.6.27-11.24_i386.deb) ...
Done.
dpkg-deb: subprocess paste killed by signal (Broken pipe)
dpkg: error processing /var/cache/apt/archives/linux-image-2.6.27-11-generic_2.6.27-11.24_i386.deb (--unpack):
 short read in buffer_copy (backend dpkg-deb during `./lib/modules/2.6.27-11-generic/kernel/drivers/infiniband/core/ib_uverbs.ko')

or

Unpacking replacement libfreetype6 ...
dpkg-deb (subprocess): error in buffer_read(stream): failed to write to pipe in copy: Input/output error
dpkg-deb: subprocess paste returned error exit status 2
dpkg: error processing /var/cache/apt/archives/libfreetype6_2.3.9-4ubuntu0.1_i386.deb (--unpack):
 short read in buffer_copy (backend dpkg-deb during `./usr/lib/libfreetype.so.6.3.20')

TODO: Not the standard workaround. Provide one.

Exec format error

  • Bug : provide a master report

This error indicates that the installation or removal script is corrupted. Often this is a empty file or a file filed with garbage. The file is one of /var/lib/dpkg/info/PACKAGE_NAME.p*

This error can occur either during installation or removal of the package.

During installation of a package

Setting up flashplugin-installer (10.0.32.18ubuntu1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing flashplugin-installer (--configure):
 subprocess installed post-installation script returned error exit status 2

During removal of a package

Removing gnome-do ...
dpkg (subprocess): unable to execute installed pre-removal script: Exec format error
dpkg: error processing gnome-do (--purge):
 subprocess installed pre-removal script returned error exit status 2

Workaround A: Finish the install

sudo apt-get clean
sudo aptitude download python-libvirt
sudo dpkg --unpack ./python-libvirt*.deb
sudo dpkg --configure python-libvirt

Workaround B: Remove the package and reinstall

sudo rm /var/lib/dpkg/info/flashplugin-installer.{postinst,prerm,postrm}
sudo apt-get remove --purge flashplugin-installer
sudo apt-get clean
sudo apt-get update

Then reinstall the package

Note: Change the package by the one which failed (check the log file)

Note about localized error message:
Finding this error in the log is not always easy because the error string has been localized.

  • Erreur de format pour exec()
  • Exec 格式错误
  • Exec formátum hiba
  • Errore di formato di exec

lzma : decoder error

  • Bug : provide a master report

Unpacking openjdk-6-jre-lib (from .../openjdk-6-jre-lib_6b12-0ubuntu6_all.deb) ...
lzma: Decoder error
dpkg-deb: subprocess <decompress> returned error exit status 1
dpkg: error processing /var/cache/apt/archives/openjdk-6-jre-lib_6b12-0ubuntu6_all.deb (--unpack):
 short read in buffer_copy (backend dpkg-deb during `./usr/lib/jvm/java-6-openjdk/jre/lib/ext/localedata.jar')

files list file missing final newline / contains empty filename

This error indicates that the file /var/lib/dpkg/info/PACKAGE_NAME.list is corrupted ( empty or full of garbage ) The reason may be a disk error, a memory error, a process being interrupted during unpack, ...

Typically these errors take the form :
files list file for package packagename contains empty filename
or
files list file for package packagename is missing final newline

Selecting previously deselected package linux-source-2.6.27.
(Reading database ... dpkg: error processing /var/cache/apt/archives/linux-source-2.6.27_2.6.27-9.19_all.deb (--unpack):
 files list file for package `libpoppler-glib3' is missing final newline

Workaround: Recreate the file list from .deb
This can be fixed, with a little work. If you have the .deb file for the offending package currently available on your system, then check its integrity by running:
dpkg --contents /var/cache/apt/archive/libgnome2-0_2.24.1-0ubuntu3_i386.deb
or get a .deb file by running :
sudo apt-get install --reinstall --download-only libgnome2-0

Once you have a valid .deb file, then you can reconstitute the file. First become root by using sudo -s (enter your administrative user password if necessary), and then use the following command (copy/paste and change the package name accordingly):

dpkg -c /var/cache/apt/archive/libgnome2-0_2.24.1-0ubuntu3_i386.deb | awk \
{if ($6 == "./") { print "/."; } \
else if (substr($6, length($6), 1) == "/") \
{print substr($6, 2, length($6) - 2); } \
else { print substr($6, 2, length($6) - 1);}}' \
> /var/lib/dpkg/info/libgnome2-0.list

Inconsistent state

Package in bad inconsistent state

  • Bug : provide a master report

Removing flashplugin-nonfree ...
dpkg: error processing flashplugin-installer (--purge):
 Package is in a very bad inconsistent state - you should
 reinstall it before attempting a removal.

Workaround A:

Please open a Terminal from the menu Applications->Accessories->Terminal and type or copy and paste the row below:

sudo apt-get --reinstall install cupsys
sudo dpkg --configure -a
sudo apt-get -f install

give your user password when requested, you don't see nothing when you type it, then press enter.

Workaround B:

Try the command below to purge the offending packages :
sudo dpkg --purge --force-remove-reinstreq flashplugin-installer flashplugin-nonfree

Then to reinstall :
sudo apt-get install flashplugin-installer

package is already installed and configured

  • Bug : provide a master report

dpkg: error processing language-pack-ar (--configure):
 package language-pack-ar is already installed and configured

Workaround A:

sudo dpkg --configure -a

Workaround B:

apt-get install --reinstall language-pack-ar

Other issues

Can't access archive

  • Bug : provide a master report

dpkg: error processing /media/cdrom0//pool/main/g/gcc-4.4/libstdc++6-4.4-dev_4.4.1-4ubuntu8_i386.deb (--unpack):
 cannot access archive: No such file or directory
dpkg: error processing /media/cdrom0//pool/main/g/gcc-4.4/g++-4.4_4.4.1-4ubuntu8_i386.deb (--unpack):
 cannot access archive: No such file or directory

No space left on device

  • Bug 105113 was a request to detect this prior to performing any updates.

  • Bug 312491 was a request to report to the user when running out of disk space.

This error is self-explanatory.

Unpacking replacement perl-base ...
dpkg: error processing /var/cache/apt/archives/perl-base_5.10.0-11.1ubuntu2.2_i386.deb (--unpack):
 failed in buffer_write(fd) (10, ret=-1): backend dpkg-deb during `./usr/lib/perl/5.10.0/IO.pm': No space left on device

Note about localized error message:
Despite the fact that there is no ambiguity regarding the cause of the failure, finding this error in the log is not always easy because the error string has been localized. Checking for the strings --unpack and buffer_write in the error log is a good indication too.

DbDriver "config" is locked

debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable

fuser -v will return the locking process if any. Kill it and try performing the upgrade again. Most often, this is only a transient situation and fuser will return nothing. Simply performing the update again should solve this issue.

Non-bugs

Common issues arising from hardware failures, common invalid bugs for this category.

Other resources

TODO

  • Add note about localized messages in log file and method to process those reports
  • Search for master reports, complete missing references in wiki and cross-reference report/wiki content
  • Add missing descriptions & workaround

  • Add section with common install/upgrade issues for specific packages ? only provide list of report + description ?


CategoryBugSquad CategoryDebugging

DebuggingInstallationIssues (last edited 2014-11-17 18:12:57 by mail)