[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Jul 24 22:46:06 UTC 2009 (Ubuntu 2.6.24-24.57-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F73A0 checksum 0 [ 0.000000] ACPI: RSDP 000F73A0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 4620 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF7700, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=6d9b6d9a-961b-4411-b545-a241f7cc68d4 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1670.557 MHz processor. [ 14.274491] Console: colour VGA+ 80x25 [ 14.274495] console [tty0] enabled [ 14.275145] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 14.276231] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 14.312486] Memory: 1027352k/1048512k available (2181k kernel code, 20464k reserved, 1006k data, 368k init, 131008k highmem) [ 14.312497] virtual kernel memory layout: [ 14.312498] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 14.312500] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.312501] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 14.312502] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 14.312504] .init : 0xc0423000 - 0xc047f000 ( 368 kB) [ 14.312505] .data : 0xc0321538 - 0xc041cdc4 (1006 kB) [ 14.312507] .text : 0xc0100000 - 0xc0321538 (2181 kB) [ 14.312511] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.312569] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 14.392468] Calibrating delay using timer specific routine.. 3343.80 BogoMIPS (lpj=6687608) [ 14.392512] Security Framework initialized [ 14.392521] SELinux: Disabled at boot. [ 14.392545] AppArmor: AppArmor initialized [ 14.392551] Failure registering capabilities with primary security module. [ 14.392564] Mount-cache hash table entries: 512 [ 14.392742] Initializing cgroup subsys ns [ 14.392748] Initializing cgroup subsys cpuacct [ 14.392760] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 14.392773] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 14.392776] CPU: L2 Cache: 256K (64 bytes/line) [ 14.392781] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 14.392795] Compat vDSO mapped to ffffe000. [ 14.392811] Checking 'hlt' instruction... OK. [ 14.408742] SMP alternatives: switching to UP code [ 14.410080] Freeing SMP alternatives: 11k freed [ 14.410240] Early unpacking initramfs... done [ 14.796372] ACPI: Core revision 20070126 [ 14.796471] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.799877] CPU0: AMD Athlon(tm) XP 2000+ stepping 01 [ 14.799898] Total of 1 processors activated (3343.80 BogoMIPS). [ 14.800100] ENABLING IO-APIC IRQs [ 14.800301] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 14.947669] Brought up 1 CPUs [ 14.947705] CPU0 attaching sched-domain: [ 14.947709] domain 0: span 01 [ 14.947711] groups: 01 [ 14.947957] net_namespace: 64 bytes [ 14.947965] Booting paravirtualized kernel on bare hardware [ 14.948518] Time: 6:35:12 Date: 08/14/09 [ 14.948560] NET: Registered protocol family 16 [ 14.948826] EISA bus registered [ 14.948856] ACPI: bus type pci registered [ 14.983709] PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=2 [ 14.983713] PCI: Using configuration type 1 [ 14.983717] Setting up standard PCI resources [ 14.989175] ACPI: EC: Look up EC in DSDT [ 14.994881] ACPI: Interpreter enabled [ 14.994884] ACPI: (supports S0 S1 S4 S5) [ 14.994901] ACPI: Using IOAPIC for interrupt routing [ 15.005130] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.005983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.006193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 15.006445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 15.057279] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.057470] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.057657] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.057844] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 15.058029] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.058218] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 15.058405] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 15.058598] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 15.058785] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.058972] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 15.059163] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.059355] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 15.059552] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 15.059743] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.059930] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.060117] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.060280] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 15.060426] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 15.060571] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 15.060730] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 15.060876] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 15.061087] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 15.061296] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 15.061504] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 15.061711] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 15.061917] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 15.062124] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 15.062272] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 15.062477] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 15.062683] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 15.062889] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 15.063096] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 15.063282] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.063328] pnp: PnP ACPI init [ 15.063340] ACPI: bus type pnp registered [ 15.068769] pnp: PnP ACPI: found 15 devices [ 15.068773] ACPI: ACPI bus type pnp unregistered [ 15.068778] PnPBIOS: Disabled by ACPI PNP [ 15.069106] PCI: Using ACPI for IRQ routing [ 15.069113] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.111400] NET: Registered protocol family 8 [ 15.111403] NET: Registered protocol family 20 [ 15.111505] AppArmor: AppArmor Filesystem Enabled [ 15.115345] Time: tsc clocksource has been installed. [ 15.123380] system 00:00: ioport range 0x4000-0x407f has been reserved [ 15.123384] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 15.123388] system 00:00: ioport range 0x4400-0x447f has been reserved [ 15.123391] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 15.123394] system 00:00: ioport range 0x4200-0x427f has been reserved [ 15.123398] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 15.123407] system 00:01: ioport range 0x5000-0x503f has been reserved [ 15.123410] system 00:01: ioport range 0x5040-0x507f has been reserved [ 15.123420] system 00:02: iomem range 0xd1800-0xd3fff has been reserved [ 15.123423] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 15.123427] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 15.123430] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 15.123433] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 15.123437] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved [ 15.123440] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 15.123443] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 15.123447] system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved [ 15.123450] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 15.123459] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 15.123462] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 15.123465] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 15.123468] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 15.123471] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 15.123474] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 15.123477] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 15.123480] system 00:04: ioport range 0x294-0x297 has been reserved [ 15.153992] PCI: Bridge: 0000:00:08.0 [ 15.153995] IO window: disabled. [ 15.154000] MEM window: disabled. [ 15.154004] PREFETCH window: disabled. [ 15.154012] PCI: Bridge: 0000:00:1e.0 [ 15.154014] IO window: disabled. [ 15.154018] MEM window: e8000000-e9ffffff [ 15.154022] PREFETCH window: e4000000-e7ffffff [ 15.154035] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 15.154054] NET: Registered protocol family 2 [ 15.191336] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.191761] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.193503] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 15.194354] TCP: Hash tables configured (established 131072 bind 65536) [ 15.194359] TCP reno registered [ 15.203398] checking if image is initramfs... it is [ 15.654515] Switched to high resolution mode on CPU 0 [ 15.932442] Freeing initrd memory: 7320k freed [ 15.933322] audit: initializing netlink socket (disabled) [ 15.933340] audit(1250231712.516:1): initialized [ 15.933529] highmem bounce pool size: 64 pages [ 15.935893] VFS: Disk quotas dquot_6.5.1 [ 15.935988] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 15.936167] io scheduler noop registered [ 15.936170] io scheduler anticipatory registered [ 15.936173] io scheduler deadline registered [ 15.936185] io scheduler cfq registered (default) [ 15.936349] Boot video device is 0000:02:00.0 [ 15.936744] isapnp: Scanning for PnP cards... [ 16.290752] isapnp: No Plug & Play device found [ 16.327177] Real Time Clock Driver v1.12ac [ 16.327322] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.327473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.327645] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 16.328397] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.328848] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 16.330324] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.330417] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 16.330554] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 16.333011] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.333017] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.345431] mice: PS/2 mouse device common for all mice [ 16.345586] EISA: Probing bus 0 at eisa.0 [ 16.345611] Cannot allocate resource for EISA slot 4 [ 16.345614] Cannot allocate resource for EISA slot 5 [ 16.345631] EISA: Detected 0 cards. [ 16.345636] cpuidle: using governor ladder [ 16.345638] cpuidle: using governor menu [ 16.345809] NET: Registered protocol family 1 [ 16.345846] Using IPI No-Shortcut mode [ 16.345889] registered taskstats version 1 [ 16.345998] Magic number: 5:726:569 [ 16.346101] hash matches device ptyb1 [ 16.346203] hash matches device PNP0C0F:16 [ 16.346222] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 16.346224] EDD information not available. [ 16.346682] Freeing unused kernel memory: 368k freed [ 16.346721] Write protecting the kernel read-only data: 802k [ 16.377299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 17.646535] fuse init (API version 7.9) [ 17.666565] ACPI: Fan [FAN] (on) [ 17.676615] ACPI: Thermal Zone [THRM] (39 C) [ 18.701608] usbcore: registered new interface driver usbfs [ 18.701640] usbcore: registered new interface driver hub [ 18.713580] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 18.713989] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 18.713998] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 18.714007] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.729914] usbcore: registered new device driver usb [ 18.774962] SCSI subsystem initialized [ 18.785400] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 18.818158] libata version 3.00 loaded. [ 18.972962] FDC 0 is a post-1991 82077 [ 19.233107] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 00:0c:76:53:df:bd [ 19.233115] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 19.233695] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 19.233705] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17 [ 19.233723] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.233727] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 19.234151] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 19.234178] ohci_hcd 0000:00:02.0: irq 17, io mem 0xea004000 [ 19.290686] usb usb1: configuration #1 chosen from 1 choice [ 19.290721] hub 1-0:1.0: USB hub found [ 19.290732] hub 1-0:1.0: 3 ports detected [ 19.392886] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 19.392899] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18 [ 19.392917] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 19.392922] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 19.392961] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 19.392983] ohci_hcd 0000:00:02.1: irq 18, io mem 0xea005000 [ 19.450399] usb usb2: configuration #1 chosen from 1 choice [ 19.450433] hub 2-0:1.0: USB hub found [ 19.450444] hub 2-0:1.0: 3 ports detected [ 19.552961] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 19.552969] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16 [ 19.552984] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 19.552988] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 19.553027] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 19.553069] ehci_hcd 0000:00:02.2: debug port 1 [ 19.553075] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 19.553090] ehci_hcd 0000:00:02.2: irq 16, io mem 0xea000000 [ 19.695862] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 19.707834] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.708001] usb usb3: configuration #1 chosen from 1 choice [ 19.708032] hub 3-0:1.0: USB hub found [ 19.708042] hub 3-0:1.0: 6 ports detected [ 19.812202] pata_amd 0000:00:09.0: version 0.3.10 [ 19.812300] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 19.813592] scsi0 : pata_amd [ 19.814487] scsi1 : pata_amd [ 19.815393] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 19.815397] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 19.983852] ata1.00: ATA-6: WDC WD800BB-00FJA0, 13.03G13, max UDMA/100 [ 19.983859] ata1.00: 156301488 sectors, multi 16: LBA [ 19.996305] ata1.01: ATA-7: WDC WD1600AABB-56PUA0, 00.07H00, max UDMA/100 [ 19.996309] ata1.01: 312581808 sectors, multi 16: LBA48 [ 20.003710] ata1.00: configured for UDMA/100 [ 20.019895] ata1.01: configured for UDMA/100 [ 20.131119] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 20.263421] usb 3-1: configuration #1 chosen from 1 choice [ 20.263844] hub 3-1:1.0: USB hub found [ 20.264015] hub 3-1:1.0: 4 ports detected [ 20.339212] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H20N, 1.01, max UDMA/33 [ 20.510869] ata2.00: configured for UDMA/33 [ 20.511040] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00FJ 13.0 PQ: 0 ANSI: 5 [ 20.511596] scsi 0:0:1:0: Direct-Access ATA WDC WD1600AABB-5 00.0 PQ: 0 ANSI: 5 [ 20.513160] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H20N 1.01 PQ: 0 ANSI: 5 [ 20.532894] Driver 'sd' needs updating - please use bus_type methods [ 20.533016] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.533034] sd 0:0:0:0: [sda] Write Protect is off [ 20.533038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.533059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.533121] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 20.533134] sd 0:0:0:0: [sda] Write Protect is off [ 20.533137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.533156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.533161] sda: sda1 sda2 [ 20.538637] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.538747] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 20.538764] sd 0:0:1:0: [sdb] Write Protect is off [ 20.538768] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 20.538788] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.538847] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 20.538859] sd 0:0:1:0: [sdb] Write Protect is off [ 20.538863] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 20.538881] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.538885] sdb:<4>Driver 'sr' needs updating - please use bus_type methods [ 20.544250] sdb1 < sdb5 sdb6 sdb7 > sdb2 sdb3 [ 20.589897] sd 0:0:1:0: [sdb] Attached SCSI disk [ 20.603846] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.603872] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 20.603894] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 20.608421] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 20.608430] Uniform CD-ROM driver Revision: 3.20 [ 20.608506] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 21.486492] Attempting manual resume [ 21.486498] swsusp: Resume From Partition 8:18 [ 21.486500] PM: Checking swsusp image. [ 21.486763] PM: Resume from disk failed. [ 21.511210] kjournald starting. Commit interval 5 seconds [ 21.511235] EXT3-fs: mounted filesystem with ordered data mode. [ 30.422437] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 30.824517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 30.885551] Linux agpgart interface v0.102 [ 31.089909] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.157138] agpgart: Detected NVIDIA nForce2 chipset [ 31.163918] agpgart: AGP aperture is 64M @ 0xe0000000 [ 31.190336] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 31.190359] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 [ 31.236025] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 31.262222] parport_pc 00:0c: reported by Plug and Play ACPI [ 31.262286] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 31.337170] input: Power Button (FF) as /devices/virtual/input/input4 [ 31.352735] ACPI: Power Button (FF) [PWRF] [ 31.352952] input: Power Button (CM) as /devices/virtual/input/input5 [ 31.368803] ACPI: Power Button (CM) [PWRB] [ 33.282166] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 [ 33.282174] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17 [ 33.282207] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 33.605019] intel8x0_measure_ac97_clock: measured 52742 usecs [ 33.605025] intel8x0: clocking to 47467 [ 34.424847] nvidia: module license 'NVIDIA' taints kernel. [ 34.809931] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 34.809944] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19 [ 34.810469] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008 [ 36.817988] lp0: using parport0 (interrupt-driven). [ 36.850161] usbcore: registered new interface driver libusual [ 36.856635] Initializing USB Mass Storage driver... [ 36.856695] usbcore: registered new interface driver usb-storage [ 36.856700] USB Mass Storage support registered. [ 36.933568] Adding 2000052k swap on /dev/sdb2. Priority:-1 extents:1 across:2000052k [ 37.509168] EXT3 FS on sdb3, internal journal [ 38.806802] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.291158] No dock devices found. [ 40.724760] NET: Registered protocol family 10 [ 40.725406] lo: Disabled Privacy Extensions [ 40.860019] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 40.860026] apm: overridden by ACPI. [ 41.009352] ppdev: user-space parallel port driver [ 41.232172] audit(1250211938.562:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5030 profile="/usr/sbin/cupsd" namespace="default" [ 42.463828] Bluetooth: Core ver 2.11 [ 42.464798] NET: Registered protocol family 31 [ 42.464805] Bluetooth: HCI device and connection manager initialized [ 42.464811] Bluetooth: HCI socket layer initialized [ 42.502482] Bluetooth: L2CAP ver 2.9 [ 42.502490] Bluetooth: L2CAP socket layer initialized [ 42.698593] Bluetooth: RFCOMM socket layer initialized [ 42.698623] Bluetooth: RFCOMM TTY layer initialized [ 42.698626] Bluetooth: RFCOMM ver 1.8 [ 44.694652] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 44.695103] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 44.695364] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode [ 46.566748] NET: Registered protocol family 17 [ 73.080230] eth0: no IPv6 routers present