Etherpad

Differences between revisions 26 and 27
Revision 26 as of 2010-07-02 05:33:55
Size: 8292
Editor: c-24-7-212-58
Comment:
Revision 27 as of 2010-07-02 05:35:31
Size: 8293
Editor: c-24-7-212-58
Comment:
Deletions are marked like this. Additions are marked like this.
Line 43: Line 43:
== New Installation Instructions== == New Installation Instructions ==

There are no Ubuntu packages for Etherpad yet. If you want to help package Etherpad in Ubuntu see:

Install packages

Install pre-requisite packages for getting and building Etherpad.

sudo apt-get install sun-java6-jdk scala mysql-server mysql-client libmysql-java mercurial

Etherpad will not build or run with openjdk-6-jdk or openjdk-6-jre. It also is best to use Sun's jar since fastjar seems to have some issues.

If you get this error:

Package sun-java6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package sun-java6-jdk has no installation candidate

Checkout /etc/apt/sources.list and add this line if missing:

deb http://us.archive.ubuntu.com/ubuntu/ hardy multiverse

Then

apt-get update

and try again.

It is necessary to ensure that the server's host name is in the /etc/hosts for the IP 127.0.0.1 . If this is not there you will have a compile time error like this :

"Unable to establish connection to compilation daemon

  • Compilation failed."

Furthermore, it might be necessary to tell Ubuntu to switch from OpenJDK to Sun’s Java:

update-java-alternatives -s java-6-sun

New Installation Instructions

There is now an apt source that you can put in your /etc/apt/sources.list http://wiki.github.com/ether/pad/installation-instructions-ii

UBUNTU/Debian

sudo echo "deb http://etherpad.org/apt all ." >> /etc/apt/sources.list
sudo echo "deb http://us.archive.ubuntu.com/ubuntu hardy multiverse" >> /etc/apt/sources.list

Then do the following commands

$sudo apt-get update
$sudo apt-get install etherpad

You will get the following message.

$ apt-get install etherpad
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  etherpad
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 0B/31.5MB of archives.
After this operation, 45.0MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  etherpad
Install these packages without verification [y/N]? 

Type Y because you trust the etherpad foundation. Smile :)

Now for some mysql magic. http://dev.mysql.com/doc/refman/4.1/en/adding-users.html

$mysql -p
Enter password: 
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 205
Server version: 5.1.41-3ubuntu12.3 (Ubuntu)

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> CREATE DATABASE etherpad;
mysql> GRANT ALL PRIVILEGES ON *.* TO 'etherpad'@'localhost' IDENTIFIED BY 'some_password_here' 
mysql> quit
Bye
$

Now the etherpad database is done. Give yourself a pat on the back. Now depending on the speed of box server you might want to get a drink right now. Or read http://xkcd.com/ while the code is compiling.

$cd /usr/share/etherpad
$bin/build.sh

In your favorite editor or nano

nano /etc/etherpad/etherpad.local.properties

Edit the line topdomains = <YOUR DOMAIN HERE>, Ubuntu,localhost,localhost.localdomain To include your Fully Qualified Domain Name(FQDN) of your box. then run

$sudo bin/run.sh

YAY You did it. Be the only kid on your block that has installed etherpad.

Get Etherpad code

There are no releases of Etherpad at the moment, so we grab directly from mercurial.

hg clone https://etherpad.googlecode.com/hg/ etherpad

If you are running this command from behind an office firewall, you might run into a bug in Python for HTTPS from behind a proxy (http://bugs.python.org/issue1424152). Clone from the http URL instead.

hg clone http://etherpad.googlecode.com/hg/ etherpad

You might want to patch the etherpad code to build on Ubuntu: The description below shows the difference between the original file and changes, leading + shows where lines are added or changed. This example show two changes to trunk/infrastructure/bin/makejar.sh, both removing /lib from a path.

diff -r 81287c8af1ac trunk/infrastructure/bin/makejar.sh
--- a/trunk/infrastructure/bin/makejar.sh       Fri Dec 18 18:44:23 2009 +1100
+++ b/trunk/infrastructure/bin/makejar.sh       Sat Dec 19 09:50:05 2009 -0500
@@ -32,11 +32,11 @@
 
 TMPSTORE=/tmp/ajbuild-tmpstore-`date +%s`
 
-JARFILES=`echo $SCALA_HOME/lib/scala-library.jar lib/*.jar lib/manifest`
+JARFILES=`echo $SCALA_HOME/scala-library.jar lib/*.jar lib/manifest`
 function genjar {
     echo "unzipping JARs..."
     pushd $1 >> /dev/null
-    $JAR xf $SCALA_HOME/lib/scala-library.jar
+    $JAR xf $SCALA_HOME/scala-library.jar
     rm -rf META-INF
     for a in ../../lib/*.jar; do
        $JAR xf $a

(As of Dec. 23, 2009 the patching instructions above are either incomplete or do not provide any explanation on what to do. Typing the first command directly into the command line produces a "not found" error. Please revise these instructions to be more clear in a step-by-step fashion rather than assuming a user should know what to do.) Yes and Update would be nice Smile :)

  • Gee, this is not a script, it's a diff file. See man patch.

What these patching instructions means is to edit the file (for example : trunk/infrastructure/bin/makejar.sh ) and find the lines starting with a - and replace them with the line starting with a +. If there's only a line with a +, that means add that line to where it is shown in the file.

Alternatively (and to avoid modifying the source file), you could use a symbolic link pointing to the desired directory:

ln -s /usr/share/java /tmp/lib
export SCALA_HOME=/tmp

If your mysql was updated you may need to restart mysql now.

sudo /etc/init.d/mysql start

Be sure to add you domain to the list of SUPERDOMAINs:

diff -r 81287c8af1ac trunk/etherpad/src/etherpad/globals.js
--- a/trunk/etherpad/src/etherpad/globals.js    Fri Dec 18 18:44:23 2009 +1100
+++ b/trunk/etherpad/src/etherpad/globals.js    Sat Dec 19 09:50:05 2009 -0500
@@ -29,6 +29,8 @@
 var SUPERDOMAINS = {
   'localbox.info': true,
   'localhost': true,
+  'yourdomain.com': true,
+  'yourdomain.org': true,
   'etherpad.com': true
 };

Configure Environment

$ export JAVA_HOME=/usr/lib/jvm/java-6-sun
$ export JAVA="$JAVA_HOME/bin/java"
$ export SCALA_HOME=/usr/share/java    # or =/tmp – see above
$ export SCALA="$SCALA_HOME/bin/scala" # Shouldn’t it be =/usr/bin/scala ?
$ export PATH="$JAVA_HOME/bin:$SCALA_HOME/bin:$PATH"
$ export MYSQL_CONNECTOR_JAR=/usr/share/java/mysql-connector-java.jar

Configure MySQL

Set the variable "mysql" in the db setup script, to the name of your mysql client executable.

diff -r 81287c8af1ac -r 5ea3ba9d10f7 trunk/etherpad/bin/setup-mysql-db.sh
--- a/trunk/etherpad/bin/setup-mysql-db.sh      Fri Dec 18 18:44:23 2009 +1100
+++ b/trunk/etherpad/bin/setup-mysql-db.sh      Sun Dec 20 15:53:08 2009 +0530
@@ -19,6 +19,7 @@
   exit 1
 fi
 
+mysql="mysql"
 db="etherpad"
 
 echo "Creating etherpad ${db}..."

Alternatively, you also could simply enter export mysql=/usr/bin/mysql without editing the source file.

Run the db setup script.

$ cd trunk/etherpad
$ sudo bin/setup-mysql-db.sh

Note if you had setup a password for the root account on the mysql server, then this won't work directly. You can edit the setup-mysql-db.sh as needed to fix this. For example (there are two instances of this in the file)

- echo "create database ${db};" | ${mysql} -u root
+ echo "create database ${db};" | ${mysql} --user=root --password=secret
#and same for the other instances of ${mysql}

Alternatively, you could setup your ~/.my.cnf accordingly:

[client]
user = root
password = secret

Compiling Etherpad

From trunk/etherpad:

$ bin/rebuildjar.sh

Running Etherpad

$ bin/run-local.sh

Etherpad (last edited 2012-02-15 09:24:13 by 135)