WindowsServerNetboot

Differences between revisions 23 and 24
⇤ ← Revision 23 as of 2006-03-03 01:32:06 →
Size: 5989
Editor: c-66-30-92-153
Comment:
← Revision 24 as of 2006-03-08 12:52:51 → ⇥
Size: 6776
Editor: host86-140-41-31
Comment:
Deletions are marked like this. Additions are marked like this.
Line 13: Line 13:
If you have a floppy drive, you can make a floppy that will allow you to PXE boot but that article is somewhere else on this wiki. If you have a floppy drive, you can make a floppy that will allow you to PXE boot on a non PXE enabled network card. The etherboot based one can be found here: [http://sourceforge.net/project/showfiles.php?group_id=80408&package_id=97496] the package is ''network_boot_floppy+cd+hd_540.zip''

Alternativly you can use the microsoft based pxe boot floppy - which can be constructed by using the Remote Boot Floppy Generator program named "rbfg.exe" which can be found in Windows 2003 or Windows 2000 Server version under the directory ''\windows\system32\dllcache'' or ''\winnt\ServicePackFiles\i386'' respectively.
Line 82: Line 84:
''Sometimes the install of the base system seems to fail, I found that just repeating the base system install WITHOUT removing the packages (installing to unclean target) means that it eventualy works - must be internet connection errors or whatever - keep trying as it gets there in the end! ''

Network Installing Ubuntu Using a Windows box

This document describes how to install ubuntu through your network without having to use a linux box as a TFTP and DHCP server. This is a very easy method for a linux newb like me.

My scenario

I want to install ubuntu linux onto a computer that has no removable drives. This computer has a PXE booting capable BIOS.

If you have a floppy drive, you can make a floppy that will allow you to PXE boot on a non PXE enabled network card. The etherboot based one can be found here: [http://sourceforge.net/project/showfiles.php?group_id=80408&package_id=97496] the package is network_boot_floppy+cd+hd_540.zip

Alternativly you can use the microsoft based pxe boot floppy - which can be constructed by using the Remote Boot Floppy Generator program named "rbfg.exe" which can be found in Windows 2003 or Windows 2000 Server version under the directory \windows\system32\dllcache or \winnt\ServicePackFiles\i386 respectively.

What you will need

  • A network with a windows computer
  • A a network gateway to the internet (Cable/DSL Router)
  • Tftpd32.exe (The windows TFTP/DHCP server program)
  • The Ubuntu Netboot Image

  • 7-Zip to unzip the image ([http://cameronbergh.com/mirror/7z432.exe Available Here])

All files necissary

[http://www.cameronbergh.com/mirror/breezynetboot.7z Breezy netboot kit (386)]

[http://www.cameronbergh.com/mirror/breezynetboot64.7z Breezy netboot kit (amd64)]

Individual files

[http://tftpd32.jounin.net/ tftpd32.exe Mirror 1]

[http://www.cameronbergh.com/ftp/tftpd32.zip tftpd32.exe Mirror 2]

[http://archive.ubuntu.com/ubuntu/dists/breezy/main/installer-i386/current/images/netboot/netboot.tar.gz Breezy Netboot Image (i386)]

[http://archive.ubuntu.com/ubuntu/dists/breezy/main/installer-amd64/current/images/netboot/netboot.tar.gz Breezy Netboot Image (amd64)]

[http://archive.ubuntu.com/ubuntu/dists/hoary/main/installer-i386/current/images/netboot/netboot.tar.gz Hoary Netboot Image (i386)]

[http://archive.ubuntu.com/ubuntu/dists/hoary/main/installer-amd64/current/images/netboot/netboot.tar.gz Hoary Netboot Image (amd64)]

This is how we do it (Breezy Style)

  1. If you downloaded the 7z that i provided, skip to step 7.
  2. On the windows box, make a folder called "cb"
  3. Place Tftpd32.exe with its support files in "cb"
  4. Extract the contents of netboot.tar.gz and place them in a folder called "netboot"

    • Note: Winrar may give you some errors that it couldnt create some symbolic links, just ignore it.

  5. Put the netboot folder inside of the "cb" folder
  6. Go To ../cb/netboot/ubuntu-installer/i386/ or ../cb/netboot/ubuntu-installer/amd64/ then copy "pxelinux.cfg", "linux", and "pxelinux.0". Now paste them in ../cb/netboot/
  7. Run Tftpd32.exe and click the DHCP tab
    • in the default router box, put the address of your internet gateway (usually 192.168.0.1 or 192.168.1.1 for residential routers)
    • in the ip pool starting address box put your gateway's address + 1 to the last number (Example: 192.168.0.2)
    • Size of pool = i said about 10
    • if your network is something like 192.168.0.1 then your network mask should be 255.255.255.0
    • Set the Bootfile field to the location of the pxelinux.0 file (example "\netboot\pxelinux.0)
    • Set the WINS/DNS server address to the address of your main router (192.168.0.1)
    • Leave the domain name blank, unless you need to change it.
  8. Hit the "Save" button and then click "settings"
  9. on the settings menu Check the following and leave the others how they are.
    • PXE Compatability
    • translate unix file names
    • allow / as virtual root
  10. click "ok", Now every machine on your network that requests a PXE boot rom should recieve the breezy installer! (please let me know if this works for you).

A few bugs: When picking a apt-get source, if you select the united states, the installer tries to connect to "http://.archive.ubuntu.com" instead of "http://archive.ubuntu.com", this results in a failure to connect. you can work around this by selecting the UK mirror and then selecting "archive.ubuntu.com" when prompted.

The AMD64 image for some reason installs the "edubuntu-desktop" package rather than the "ubuntu-desktop" package. My fix was to install breezy with a server install, and then install the ubuntu-desktop package via apt-get.

Sometimes the install of the base system seems to fail, I found that just repeating the base system install WITHOUT removing the packages (installing to unclean target) means that it eventualy works - must be internet connection errors or whatever - keep trying as it gets there in the end!

This is how we do it (Hoary Style)

  1. On the windows box, make a folder called "cameronrules"
  2. Place Tftpd32.exe in that folder
  3. Extract the contents of netboot.tar.gz and place them in a folder called "netboot"

    • Note: Winrar may give you some errors that it couldnt create some symbolic links, just ignore it.

  4. Put the netboot folder inside of the "cameronrules" folder
  5. Go To cameronrules/netboot/ubuntu-installer/i386/ or cameronrules/netboot/ubuntu-installer/amd64/ and copy pxelinux.cfg folder
  6. Go back to the netboot folder and Paste pxelinux.cfg folder
  7. Run Tftpd32.exe and click the DHCP tab
    • in the default router box, put the address of your internet gateway (usually 192.168.0.1 or 192.168.1.1 for residential routers)
    • in the ip pool starting address box put your gateway's address + 1 to the last number (Example: 192.168.0.2)
    • Size of pool = i said about 10
    • If your network is something like 192.168.0.1 then your network mask should be 255.255.255.0
    • Set the Bootfile field to the address of the pxelinux.0 file (it should be "\netboot\pxelinux.0)
    • Set the WINS/DNS server address to the address of your main router (192.168.0.1)
    • Leave the domain name blank, unless you need to change it.
  8. Hit the "Save" button and then click "settings"
  9. on the settings menu Check the following and leave the others how they are.
    • PXE Compatability
    • translate unix file names
    • allow / as virtual root
  10. click "ok" and tell your target computer to look on your network for a PXE boot rom.

if all went right, you should see some text fly by and then the ubuntu installer will load on your target computer. let me know if you have any problems.

CategoryDocumentation

Installation/WindowsServerNetboot (last edited 2008-08-06 16:32:13 by localhost)