MainlineBuilds

Differences between revisions 50 and 51
Revision 50 as of 2018-05-29 08:07:35
Size: 10890
Editor: penalvch
Comment: 1) Minor presentation chg's. 2) As per LP#1773581 et al. add sects on install fails so folks don't give up the moment one kernel doesn't install.
Revision 51 as of 2018-05-31 20:26:22
Size: 10956
Editor: penalvch
Comment: Due to LP#1773643, adj wording to advise don't need to compile to install .deb files.
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
By default, Ubuntu systems run with the Ubuntu kernels provided by the Ubuntu repositories. However it is handy to be able to test with unmodified upstream kernels to help locate problems in the Ubuntu kernel patches, or to confirm that upstream has fixed a specific issue. To this end we now offer select upstream kernel builds. These kernels are made from unmodified kernel source but using the Ubuntu kernel configuration files. These are then packaged as Ubuntu .deb files for simple installation. By default, Ubuntu systems run with the Ubuntu kernels provided by the Ubuntu repositories. However it is handy to be able to test with unmodified upstream kernels to help locate problems in Ubuntu kernel patches, or to confirm that upstream has fixed a specific issue. To this end we now offer select upstream kernel builds. These kernels are made from unmodified kernel source but using the Ubuntu kernel configuration files. These are then packaged as Ubuntu .deb files for simple installation, saving you the time of compiling kernels, and debugging build issues.

Introduction

By default, Ubuntu systems run with the Ubuntu kernels provided by the Ubuntu repositories. However it is handy to be able to test with unmodified upstream kernels to help locate problems in Ubuntu kernel patches, or to confirm that upstream has fixed a specific issue. To this end we now offer select upstream kernel builds. These kernels are made from unmodified kernel source but using the Ubuntu kernel configuration files. These are then packaged as Ubuntu .deb files for simple installation, saving you the time of compiling kernels, and debugging build issues.

These kernels are not supported and are not appropriate for production use.

Upstream kernels archive

The upstream kernels archive is located at the URL below. There is a directory for each build. Note, if you are testing for a bug, please do not use the daily folder, but use the latest mainline kernel at the top:

The tagged releases (as made by Linus and the stable maintainers) are found under a directory matching their tag name and which kernel configuration they were built with (<tag>-<series>). Daily tip of the tree builds are found in the daily sub-directory named for the date they were made.

Each build directory contains the header and image .deb files for the generic flavour i386 and amd64 architectures.

Preparing to install an upstream kernel

First, if one is using select proprietary or out-of-tree modules (ex. vitualbox, nvidia, fglrx, bcmwl, etc.) unless there is an extra package available for the version you are testing, you will need to uninstall the module first, in order to test the mainline kernel. If you do not uninstall these modules first, then the upstream kernel may fail to install, or may fail to boot.

Installing upstream kernels manually

To boot into an upstream kernel you need to download and install the packages that corresponds to your architecture.

For example, let us use http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14.4-utopic/.
If you are using a 32-bit/i386 architecture, you would want those marked A.
If you are using a 64-bit/amd64 architecture, B.
(Use generic kernel unless the issue is only reproducible in a lowlatency kernel).

B  linux-headers-3.14.4-031404-generic_3.14.4-031404.201405130853_amd64.deb
A  linux-headers-3.14.4-031404-generic_3.14.4-031404.201405130853_i386.deb
   linux-headers-3.14.4-031404-lowlatency_3.14.4-031404.201405130853_amd64.deb
   linux-headers-3.14.4-031404-lowlatency_3.14.4-031404.201405130853_i386.deb
AB linux-headers-3.14.4-031404_3.14.4-031404.201405130853_all.deb
B  linux-image-3.14.4-031404-generic_3.14.4-031404.201405130853_amd64.deb
A  linux-image-3.14.4-031404-generic_3.14.4-031404.201405130853_i386.deb
   linux-image-3.14.4-031404-lowlatency_3.14.4-031404.201405130853_amd64.deb
   linux-image-3.14.4-031404-lowlatency_3.14.4-031404.201405130853_i386.deb

It is best to download the files into a folder by themselves. Also, it is recommended to verify the integrity of downloaded packages as explained below under "Verifying the mainline build binaries".

Then, one may install all the packages simultaneously by executing the following in a terminal:

sudo dpkg -i *.deb

When this process completes you should have a new entry on your boot menu representing the upstream kernel (press Shift while booting if your boot menu doesn't show). This will appear as an entry like this:

Ubuntu Trusty, kernel 3.14.4-031404-generic

The headers-<kernelname>_<architecture>.deb and headers-<kernelname>_all.deb packages allow one to build external modules.

Problems installing the upstream kernel

Virtualbox installed

Issues can occur installing an upstream kernel due to Virtualbox being installed. For example:

Error! Bad return status for module build on kernel: 3.7.0-030700rc2-generic (x86_64)
Consult /var/lib/dkms/virtualbox/4.1.18/build/make.log for more information.

As per above, you need to either install the extra package, if available, or uninstall virtualbox.

Version of package needed by installer is too old

A failure to install can occur due to the OS having packages that are too old for the install to proceed. For example:

depends on libssl1.1 (>= 1.1.0); however: Package libssl1.1 is not installed.

If this is due the version of libssl1.1 installed is too old then you need to upgrade your OS. However, if libssl1.1 is not installed at all, and the version that comes with your release is new enough, then install libssl1.1.

Other install errors

If for some reason the kernel you attempted to build failed, and it's not due to the above, then continue to test the next most recent kernel version until you can test to the issue.

Uninstalling upstream kernels

The upstream kernels have their own ABI namespace, so they install side by side with the stock Ubuntu kernels (each kernel has a separate directory under /lib/modules/VERSION for example). This means that you can keep several mainline and Ubuntu stock kernels installed at the same time and select the one you need from the GRUB boot menu.

If you would like to uninstall an upstream kernel anyway, execute the following to find the exact name of the kernel packages you want to uninstall:

dpkg -l | grep "linux\-[a-z]*\-"

and then execute the following to uninstall them:

sudo apt-get remove KERNEL_PACKAGES_TO_REMOVE

Remember that several packages can belong to one kernel version: common headers, architecture specific headers and the architecture specific image.

Also, once the mainline packages are removed, one may still see entries for these via the above dpkg command. To purge these entries execute at a terminal:

sudo dpkg --purge ENTRY

Mainline build tool chain

These kernels are built with the tool chain (gcc etc.) from the previous LTS (Ubuntu 8.04/10.04/12.04) depending on version. Therefore, out-of-tree kernel modules built with tools from other versions likely will not work. The file BUILD in later mainline builds details what was used.

Mainline kernel mapping to Ubuntu kernel

The Ubuntu kernel is not bit-for-bit the same as the mainline. However, one may find the upstream release that the Ubuntu kernel is based on via the Ubuntu to mainline mapping table.

Does the kernel team support the mainline kernel builds?

The mainline kernel builds are produced for debugging purposes and therefore come with no support. Use them at your own risk.

Where can I get the source for these builds?

In each directory there is a COMMIT file which defines the base commit in Linus' master tree from which they were built. The patches in the same directory ????-* are applied on top of this commit to make the build tree. A mirror of Linus' tree is available from git://kernel.ubuntu.com/virgin/linux.git.

First download the COMMIT and patch files ????-* from the mainline build in question to a temporary directory:

git clone git://kernel.ubuntu.com/virgin/linux.git mainline
cd mainline
git checkout -b `cat ${MAINLINE}/COMMIT`
git am ${MAINLINE}/????-*

Verifying the mainline build binaries

In order to allow verification that the published builds are the builds made by the mainline build system, the individual files are checksummed and the results of that published as CHECKSUMS in the same directory. This file is in turn signed by the mainline builder using the GPG key below which can be obtained from the Ubuntu Keyserver:

pub   2048R/17C622B0 2008-05-01
      Key fingerprint = 60AA 7B6F 3043 4AE6 8E56  9963 E50C 6A09 17C6 22B0
uid                  Kernel PPA <kernel-ppa@canonical.com>

The verification can be done by running the following commands:

  1. Import the above public key to your keyring (if you haven't already done that):
    $ gpg --keyserver hkps://pgp.mit.edu --recv-key "60AA7B6F30434AE68E569963E50C6A0917C622B0"
  2. Download the CHECKSUMS and CHECKSUMS.gpg files from the build directory and verify if the CHECKSUMS is signed with the above key:
    $ gpg --verify CHECKSUMS.gpg CHECKSUMS
    gpg: Signature made .... using RSA key ID 17C622B0
    gpg: Good signature from "Kernel PPA <kernel-ppa@canonical.com>"
    gpg: WARNING: This key is not certified with a trusted signature!
    gpg:          There is no indication that the signature belongs to the owner.
  3. Verify the checksums of downloaded deb files:
    $ shasum -c CHECKSUMS 2>&1 | grep 'OK$'
    You should get a line ending with "OK" for each of downloaded deb file and each type of checksums that are given in the CHECKSUMS file.

Upstream kernels in detail

We currently build five sets of upstream kernels. All formal tags from Linus' tree and from the stable trees, plus:

  1. the daily tip of Linus' linux kernel source tree,

  2. the tip of the drm-next head of Dave Airlie's linux repository daily,

  3. the tip of the drm-intel-next head of Keith Packard's linux repository daily until 2012, after which it has been taken over by Daniel Vetter at http://cgit.freedesktop.org/drm-intel/, and in particular, the drm-intel-next branch,

  4. the tip of the master branch of the debloat-testing tree daily,
  5. tags from the combined v2.6.32.x.y tree (by StefanBader) which is v2.6.32.x with DRM from 2.6.33.y.

This makes these kernels closer to the Lucid kernels which are based on 2.6.32 kernels with DRM backported from the 2.6.33 series.

Can I install and then immediately use a kernel in a live environment?

No. One has two choices to use a mainline kernel:

  1. Install the mainline kernel in an installed environment, restart, and choose this newly installed kernel.
  2. Build a live environment with the new kernel in it. Given the amount of effort involved in doing this, it is easiest to use an installed OS to test the mainline kernel.

Kernel/MainlineBuilds (last edited 2020-03-26 22:30:32 by roguescholar)