- Contact: HP2133 Contact Needed
- Make: Hewlett-Packard
- Brand: Mini-Note
- Model: 2133
Website: HP 2133 Mini-Note
Launchpad HP2133 Related Info Quick Link: HP 2133 QuickLink
- Use Quick Link to find OLD HP2133 setup articles.
- This page being re-worked for a clean informative step by step guide to Ubuntu on the HP2133.
There are now VIA binary drivers available for Ubuntu 9.10 and 10.04 from the VIA Linux Portal.
22.214.171.124a-u910-55689 for Ubuntu 9.10 (Released 04.08.2010)
126.96.36.199a-u1004-55689 for Ubuntu 10.04 (Released 04.08.2010)
- Due to video issues with some models, Ubuntu 10.04 LTS Alternate CD install is recommended. (Text Install)
Install/Boot may fail even using failsafe Vesa with the latest BIOS versions.
(Blank screen or Screen corruption followed by lock up)
It may be necessary to re-flash the BIOS with an earlier version (download these from the HP website).
(Recommend BIOS Version F.04).
Ubuntu 10.04 LTS Notes
VIA Binary Video Drivers Working.
CPU Scaling is supported with Ubuntu 10.04.
Webcam works out of the box (Webcam tested with Cheese & Skype).
Wifi works out of the box (Wifi drivers installed via Hardware Drivers Tool).
ALSA (Sound) drivers shipped with 10.04 require update from 1.0.21 to 1.0.23.
If you install from USB pen drive you may have problems mounting USB pen drives after install.
See this thread for more information on how to correct the problem: Fix USB mounting
Ubuntu - Works fine.
XUbuntu - Works fine.
UNR - The interface to Ubuntu Netbook Release performs poorly and NEEDS hardware acceleration to be usable.
The ALSA driver version 1.0.21 shipped with Ubuntu 10.04 causes the HP 2133 sound device (VT1708/A) to disappear shortly after boot.
If you have this issue, You will need to update ALSA drivers.
Please use the script from ALSA-Update, to fix this issue.
The microphone inputs on the HP2133 need to be remapped for loud and clear internal microphone usage.
We will map the Internal Microphone to Port C (At least I think that is what we are doing....)
The HDA-Verb tool is needed to do this. Download the latest version from HERE
Extract the archive and type "make" to compile the program, Then copy it to your system. sudo cp hda-verb /bin
Now you have hda-verb ready, You can map the Microphone. sudo hda-verb /dev/snd/hwC0D0 0x15 SET_PIN_WIDGET_CONTROL 0x03a1
Use alsamixer to set your Capture and Internal Mic to reasonable levels.
Use alsactrl to save and load set levels. (Use alsactrl --help to find out how).
Insert the "hda-verb /dev/snd/hwC0D0 0x15 SET_PIN_WIDGET_CONTROL 0x03a1" command into /etc/rc.local
Also insert the alsactrl command in rc.local if needed.
188.8.131.52a-u1004-55689 VIA Binary Video Drivers for Ubuntu (Released 04.08.2010)
The 184.108.40.206a-u1004-55689 drivers appear to install without issue.
Non-RandR configuration is working.
RandR configuration is not working. (Under Investigation)
Here is a sample Non-RandR xorg.conf file for LCD display only.
Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Mouse" InputDevice "Keyboard" Option "RandR" "false" EndSection Section "Files" # RgbPath "/usr/local/share/X11/rgb" ModulePath "/usr/lib/xorg/modules" # FontPath "/usr/share/fonts/X11/misc/" # FontPath "/usr/share/fonts/X11/TTF/" # FontPath "/usr/share/fonts/X11/OTF" # FontPath "/usr/share/fonts/X11/Type1/" # FontPath "/usr/share/fonts/X11/100dpi/" # FontPath "/usr/share/fonts/X11/75dpi/" EndSection Section "InputDevice" Identifier "Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "cn" EndSection Section "InputDevice" Identifier "Mouse" Driver "mouse" Option "CorePointer" EndSection Section "Monitor" Identifier "LCD" Option "Enable" "true" EndSection Section "Monitor" Identifier "CRT" Option "Enable" "false" EndSection Section "Monitor" Identifier "DVI" Option "Enable" "false" EndSection Section "Monitor" Identifier "TV" Option "Ignore" "true" EndSection Section "Monitor" Identifier "HDMI" Option "Ignore" "true" EndSection Section "Monitor" Identifier "CRT-2" Option "Ignore" "true" EndSection Section "Monitor" Identifier "LCD-2" Option "Ignore" "true" EndSection Section "Monitor" Identifier "DVI-2" Option "Ignore" "true" EndSection Section "Monitor" Identifier "TV-2" Option "Ignore" "true" EndSection Section "Device" BusID "PCI:01:00:0" Driver "via" VendorName "VIA Tech" BoardName "via" Identifier "Configured Video Device" Option "AccelMethod" "EXA" Option "MigrationHeuristic" "greedy" Option "ActiveDevice" "LCD" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" # Virtual 2000 2000 Modes "1280x768" Depth 24 EndSubSection Identifier "Default Screen" Device "Configured Video Device" EndSection Section "Module" Load "glx" Load "dri" Load "extmod" EndSection Section "DRI" Group 0 Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection
User Related Comments (Some issues may be resolved)
VIA Video Binaries MUST be used for a pleasant experience.
There are minor problems as follows:
358793 - UNR jaunty: Slow menu interface, high CPU load
233920 - Sleep on lid close work only 1 time
Fix available for issues:
359291 - Broadcom wi-fi card doesn't work after suspend/hibernate
355918 - resolution problem starting X with the wlan network controler activated - Fixed in Karmic Koala in openchrome 1:0.2.903+svn758-0ubuntu1
[Dirk-Heine Hofstede] I installed it at my HP mini-note 2133, and except that the UNR interface reacts slow (workaround available) I didn't encounter any problems so far. My wi-fi card just ran normal and made connection again after I woke my mini up(I have done this only once yet). I didn't use the build in microphone yet, so I can't say anything about that.
[Dipock Das] I also installed it on my HP mini-note 2133 and did not have any problems. The WIFI runs fine even after suspend/hibernate.
[lean-mini] I updated my Ubuntu 9.04 Jaunty Karmic Koala to 9.10, the update ran alone, and why in a moment I switched off the wifi, data was saved and reconnect everything was running fine. While at first the touchpad was a little stuck, restarting solved the little problem. Although in the beginning you could hear the sound of drums, then do not reproduced sound. Just an update with the manager and reboot for this to be solved (or at least it happened to me, not if related). Everything is working well. More info http://ubuntuforums.org/showthread.php?t=1312633&highlight=2133
[ OzFalcon ] A flawless 10.04 Alternate CD install using external usb cd drive.
The Broadcom WiFi appeared to lock up the system when trying to do initial updates.
This was resolved by temporally disabling the WiFi (Slide button so led is orange), And immediately installing Broadcom STA drivers (Via the hardware drivers utility)
Video playback, resize & fullscreen works well using 220.127.116.11a-u1004-55689 VIA Binary Video Drivers.
No 3d using 18.104.22.168a-u1004-55689 VIA Binary Video Drivers in Non-Rand Mode. (Under Investigation)