ToshibaSatellite2100CDT
Contact: Oceandead
- Make: Toshiba
- Model: 2100CDT
Current Issues
Hardware details
- Processor: AMD K6-2 400MHz
- HD: 4.3 GB
- Removable Media: CD-ROM, Floppy
- Wireless: None Built-in, Using D-Link DWL-650 v.M1
- Network: NA
- Modem: Lucent Microelectronics 56k Winmodem (rev 01)
- Ports: USB v1.0 x1, 1x serial DB9, 1x serial PS/2 (Y adapter supported), parallel, SVGA out.
- Video: S3virge MX, 2MB - on PCI bus
- PCMCIA: 2 ports (2x Type I or Type II, or 1x 32-bit Cardbus)
- Extra Keys: None
- Sound: ESS ES1978 Maestro 2E (rev 10) - PCI
- Input: Built-in keyboard, Built-in "Accu Point" pointing device
- Memory: 192MB, 64MB default with 128MB add-on
Hardware Information |
||||
Screen & Monitors Internal 12.1" TFT (800x600) |
||||
Device |
Works? |
Bug # |
||
in Hoary ? |
in Breezy ? |
in Dapper? |
||
Screen |
Yes |
Yes |
Yes |
|
Correct resolution? |
Yes [1] |
Yes [1] |
Yes [1] |
|
Correct refresh rate? |
Yes [2] |
Yes [2] |
Yes [2] |
|
3D Acceleration |
Untested - |
Untested |
Untested |
|
External monitor works? |
Yes [3] |
Yes [3] |
Yes [3] |
|
External monitor - mirrors |
Yes |
Yes |
Yes |
|
External monitor - extend desktop |
No |
No |
No |
|
Power Management |
||||
Battery detected? |
Yes |
Yes |
Yes |
|
Hibernates? |
No |
No |
Yes |
|
Sleep |
No |
No |
Not Tested |
|
Dim/Blank monitor? |
Yes |
Yes |
Yes |
|
Sound |
||||
Sound works? |
Yes |
Yes |
Yes [4] |
|
Correct volume? |
Yes |
Yes |
Yes |
|
Hardware volume switch |
Yes |
Yes |
Yes |
|
Headphone jack |
Yes |
Yes |
Yes |
|
Mic jack |
Yes |
Yes |
Yes |
|
Networking |
||||
Wired NIC |
NA |
NA |
NA |
|
Wireless NIC |
NA |
NA |
NA |
|
PCMCIA NIC |
DWL-650 (v.M1) - ndiswrapper=yes rtl8180-sa2400 (v. 0.21)=yes |
DWL-650 (v.M1) - ndiswrapper=yes rtl8180-sa2400 (from cvs)=yes |
Yes [*/4] OOTB! |
|
Firewire |
NA |
NA |
NA |
|
Bluetooth |
NA |
NA |
NA |
|
Modem |
No - Winmodem |
Dials, no connection |
Untested |
|
Infrared |
NA |
NA |
NA |
|
Touchpad & Mice |
||||
Accupoint |
Yes |
Yes |
Yes |
|
External mouse - USB |
Untested |
Untested |
Untested |
|
External mouse - Serial |
Yes |
Yes |
Yes |
|
Docking Station/Port Replicator |
||||
AC through replicator |
Untested |
Untested |
Untested |
|
USB |
Untested |
Untested |
Untested |
|
Serial |
Untested |
Untested |
Untested |
|
Parallel |
Untested |
Untested |
Untested |
|
External Monitor - VGA |
Untested |
Untested |
Untested |
|
External Monitor - DVI |
Untested |
Untested |
Untested |
|
Modem |
Untested |
Untested |
Untested |
|
NIC |
Untested |
Untested |
Untested |
|
PS/2 |
Untested |
Untested |
Untested |
|
Additional Hardware |
||||
Fingerprint reader |
NA |
NA |
NA |
|
CD/DVD drive |
Yes |
Yes |
Yes |
|
PCMCIA cards |
Yes |
Yes |
Yes [4] |
|
Function and other keys |
||||||
Fn key |
Operation |
Keycode |
Works? |
Bug # |
||
in Hoary ? |
in Breezy ? |
in Dapper? |
||||
+ Space |
|
|
NA/no |
NA/no |
NA/no |
|
+ Esc |
|
|
NA/no |
NA/no |
NA/no |
|
+ F1 |
Toggle Backlight |
|
Yes |
Yes |
Yes |
|
+ F2 |
Power profile? |
|
Nothing |
Nothing |
Nothing |
|
+ F3 |
? |
|
Untested/no functionality |
Nothing |
Nothing |
|
+ F4 |
Volume/Mute |
|
No |
No |
Yes |
|
+ F5 |
Switch Monitor |
|
Yes, restore image corrupt. |
Yes, restore image corrupt |
Yes, restore image corrupt |
|
+ F6 |
Web Application |
|
No |
No |
No |
|
+ F7 |
Previous Track |
|
No |
No |
No |
|
+ F8 |
Play/Stop |
|
No |
No |
No |
|
+ F9 |
Skip Track |
|
No |
No |
No |
|
+ F10 |
extra arrows, pgup, pgdn etc |
|
Yes |
Yes |
Yes |
|
+ F11 |
Numlock |
|
Yes |
Yes |
Yes |
|
+ F12 |
Stretch Screen |
|
|
Untested |
Untested |
|
Notes
- [1] On initial install, only one resolution is available - 640x480. This is alleviated by adding correct refresh rates to xorg.conf. Resolutions detected are 1024x768, 800x600 and 640x480. 2100CDT's internal display only supports 1024x768 as a "virtual display mode", 800x600 (full screen - proper), 640x480 (box in center of screen).
- [2] After editing xorg.conf. Mine currently set to 31.5-64.3 hsync, 50-90 vsync. Also works fine @ 800x600 with 28-51 hsync, 50-70 vsync.
- [3] Works, but it mirrors.
- [4] Sounds looped/PC Card not seen. Fixed by changing BIOS setting for "PC Card - Controller Mode (on page 2) from "Auto-selected" to "Cardbus/16-bit". r818x driver works (well) out of the box!! - more below
Additional Notes
- "Toshset" works fine.
Driver module for the Realtek RTL8180 chip + sa2400/max2820/grf5101 frontends is available here. This is the driver module that works with my DWL-650 v.M1 (rtl8180 chip + Phillips sa2400 frontend).
2100CDT specs can be found here(pdf).
- r818x driver works (well!) out of the box! Not only is it much better than ndiswrapper, it seems to work even better than when I compiled it under hoary and breezy. Awesome!
LaptopTestingTeam/Old/ToshibaSatellite2100CDT (last edited 2010-02-24 14:44:55 by host58-172-dynamic)