||'''Observed by''' ||'''On'''||'''Win'''||'''Firmware'''||'''Win driver'''||'''Software bundle'''||'''Behaviour''' ||'''Default descriptors'''||'''Analysis'''|| ||Rafi Rubin ||xt || ||3.2.11.3.5 ||1.23 || ||Pen, no multitouch ||not available || || ||Olivier Thauvin ||xt2 || ||3.5.5.13.5 ||1.26 ||1.88 ||Pen, some multitouch ||[[http://lii-enac.fr/en/projects/shareit/ntrig-hid-3.5.5.13.5.txt|link]] ||no multitouch in reports|| ||Stephane Chatty ||tx2 ||7000 ||3.5.8.8.5 ||1.26 ||8.18 ||pen, no multitouch ||[[http://lii-enac.fr/en/projects/shareit/ntrig-hid-may2009.txt|link]] ||no multitouch in reports|| ||Pascal Giard ||tx2 ||Vista ||3.5.9.8.5 ||1.26 ||1.89 ||Pen, some multitouch ||[[http://lii-enac.fr/en/projects/shareit/ntrig-hid-3.5.9.8.5.txt|link]] || || ||Stephane Chatty ||tx2 ||7000 ||4.2.17.8.5 ||1.26 ||8.18 ||no pen, multitouch ||[[http://lii-enac.fr/en/projects/shareit/ntrig-hid-4.2.17.8.5.txt|link]] ||multitouch visible in reports|| ||Rafi Rubin ||xt ||7100 ||4.3.6.3.5 ||1.26 ||2.59 ||Pen/multitouch || ||Evidence of mode switching|| ||Stephane Chatty ||tx2 ||7100 ||4.3.6.8.5 ||1.26 ||2.59 ||Pen/multitouch ||[[http://lii-enac.fr/en/projects/shareit/ntrig-hid-4.3.6.8.5.txt|link]] ||Evidence of mode switching|| ||Thomas Hansen || || ||4.3.6.13.5 ||1.26 ||2.59.0 || || || || ||Stephane Chatty ||tx2 ||7000 ||4.5.31.8.5 || ||2.184 ||both pen and multitouch, 3 modes|| || || ||dragon788 ||xt3 ||7000 ||1.4.11.41.0 || || ||pen, no multitouch|| ||shows up as input5,input6,input7 under hiddev,hidraw0/input0 device and nothing under input,hidraw1/input1|| Q: How do you get this info? Boot Windows 7, launch the N-trig control panel and read the firmware version from its main page. In Maverick (10.10), firmware version is printed on driver load: [ 22.808279] ntrig 0003:1B96:0001.0001: hidraw0: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:14.5-2/input0 [ 22.811262] ntrig 0003:1B96:0001.0001: Firmware version: 4.6.5.8.5 (1808 05a1) Q: How does one get the output shown in the 'default descriptors' column?