[   40.595932] ivtv:  ==================== START INIT IVTV ====================
[   40.595938] ivtv:  version 0.9.1 (tagged release) loading
[   40.595940] ivtv:  Linux version: 2.6.20-8-generic SMP mod_unload 586 
[   40.595943] ivtv:  In case of problems please include the debug info between
[   40.595945] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[   40.595947] ivtv:  any module options, when mailing the ivtv-users mailinglist.
[   40.596047] ivtv0: Autodetected Hauppauge card (cx23416 based)
[   40.596082] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 22
[   41.277454] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[   41.477384] **WARNING** I2C adapter driver [ivtv i2c driver #0] forgot to specify physical device; fix it!
[   41.542230] tveeprom 0-0050: Hauppauge model 26552, rev F0A3, serial# 8966432
[   41.542237] tveeprom 0-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
[   41.542240] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[   41.542243] tveeprom 0-0050: audio processor is CX25843 (idx 37)
[   41.542246] tveeprom 0-0050: decoder processor is CX25843 (idx 30)
[   41.542249] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter
[   41.542253] ivtv0: Autodetected Hauppauge WinTV PVR-150
[   41.569932] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
[   41.569962] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[   41.574276] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   41.617908] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[   46.405377] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[   46.519507] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[   46.601793] ivtv0: Encoder revision: 0x02050032
[   46.601875] ivtv0: Registered device video0 for encoder MPEG
[   46.602069] ivtv0: Registered device video32 for encoder YUV
[   46.602317] ivtv0: Registered device vbi0 for encoder VBI
[   46.602479] ivtv0: Registered device video24 for encoder PCM audio
[   46.602892] ivtv0: Registered device radio0 for encoder radio
[   46.602942] tuner 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[   46.979743] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[   46.979772] ivtv:  ====================  END INIT IVTV  ====================