MythTVHardwareSupport
Attachment 'pvr250mce.txt'
Download 1 [ 126.314502] ivtv: ==================== START INIT IVTV ====================
2 [ 126.314508] ivtv: version 0.9.1 (tagged release) loading
3 [ 126.314511] ivtv: Linux version: 2.6.20-9-generic SMP mod_unload 586
4 [ 126.314513] ivtv: In case of problems please include the debug info between
5 [ 126.314515] ivtv: the START INIT IVTV and END INIT IVTV lines, along with
6 [ 126.314517] ivtv: any module options, when mailing the ivtv-users mailinglist.
7 [ 126.314629] ivtv0: Autodetected Hauppauge card (cx23416 based)
8 [ 126.314679] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
9 [ 127.705153] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
10 [ 127.902540] **WARNING** I2C adapter driver [ivtv i2c driver #0] forgot to specify physical device; fix it!
11 [ 128.397691] tveeprom 2-0050: Hauppauge model 32552, rev C168, serial# 7881430
12 [ 128.397698] tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
13 [ 128.397702] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
14 [ 128.397705] tveeprom 2-0050: audio processor is MSP4448 (idx 27)
15 [ 128.397708] tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
16 [ 128.397710] tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
17 [ 128.397714] ivtv0: Autodetected Hauppauge WinTV PVR-250
18 [ 128.687451] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
19 [ 128.688027] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
20 [ 128.692374] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
21 [ 129.178909] saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
22 [ 129.665024] msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
23 [ 129.665030] msp3400 2-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect
24 [ 129.696307] ivtv0: Encoder revision: 0x02050032
25 [ 129.696634] ivtv0: Registered device video0 for encoder MPEG
26 [ 129.697054] ivtv0: Registered device video32 for encoder YUV
27 [ 129.697468] ivtv0: Registered device vbi0 for encoder VBI
28 [ 129.697803] ivtv0: Registered device video24 for encoder PCM audio
29 [ 129.698503] ivtv0: Registered device radio0 for encoder radio
30 [ 129.698561] tuner 2-0061: type set to 47 (LG NTSC (TAPE series))
31 [ 129.876521] NET: Registered protocol family 10
32 [ 129.876644] lo: Disabled Privacy Extensions
33 [ 130.098906] ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
34 [ 130.098932] ivtv: ==================== END INIT IVTV ====================
Attached Files
To refer to attachments on a page, use attachment:filename, as shown below in the list of files. Do NOT use the URL of the [get] link, since this is subject to change and can break easily.You are not allowed to attach a file to this page.