• Test plan for component: libhybris

• Ubuntu Package URL (LP): http://launchpad.net/ubuntu/+source/libhybris

• Please contact the maintainer of this page or the hybris maintainers before editing this page is used by Landers and QA so is a critical document

Test Plan

This test plan is not supposed to be complete; use it to guide your manual testing so they dont miss big functional areas that are part in the component; also this should be used as guideline to inspire the exploratory testing which should be adapted smartly based on the real content of a MP

Libhybris is a core component that touches many different areas, and the behavior also depends a lot on the hardware used (and the binary drivers), so the best way to validate it is via exploratory testing (on many different areas).

Installing libhybris

• Install latest image on phone
• Install freshly build libhybris packages that are needed for landing and reboot

Tests

Note Only Run Cases That Apply To The Hardware Under Test

• Power Button:
  • With the device off, Press the power button: The device powers on.
  • With the device on, Press and hold to the power button: The device powers off after 10 seconds.
  • With the device on, Press and hold the power button for a few seconds and release
    • Tap the power off option
    • Tap the restart option
  • With the device on, tap the power button: The devices screen blank and suspends
  • With the device on and suspended, tap the power button: Device wakes and is at the welcome screen
• Display
  • The device is on and unlocked: The display of the default scope is as expected no graphical anomalies.
  • The device is on, open the browser app: Rotate the device screen rotates as expected.
  • The device is on, scroll from scope to scope, tap on apps to open them: Touch events are as expected
  • The device is on and connected to a Monitor, Use the screen as track pad/keyboard. (1 finger move, 2 fingers scroll, 3 fingers right click)
  • The device is on, tap the Volume up+down buttons: snapshot the display
• Audio:
  • Device is on with music available on device:
    • Play audio with music-app, make sure it works as expected
    • Shut down the screen confirm playback continues
    • Change the volume in the indicator
    • Change the volume with the volume up and down buttons
    • Make the volume different to the ringer volume and then pause the music and see if it changes over
• Camera:
  • Device is on camera app is open and using the Rear camera:
    • Take a picture
    • Force flash
    • Auto flash cover light sensor
    • Enable gps take a photo
    • Take a video
  • Device is on camera app is open and using the Front camera:
    • Take a picture
    • Take a video
• Video:
  • The device is on and there are videos in the formats listed on the device, open the video from the scope in media player:
    • Play an mp4 video
      • Seek back and forward
      • Play/puase
    • Play an h.264 video
      • Seek back and forward
      • Play/pause
    • Play captured videos from front and rear cameras
• Voice calls (keeping this section not so much for ofono testing but because the dialler is the only app that uses all the other functions):
  • Device is on and using the dialler app, Ring out: Use the Earpiece, proximity sensor blanks screen
  • Device is on and suspended, Ring in using silent mode: ensure phone vibrates and activates the screen
  • Switch between the three audio sources: Rings through on bt. Audio switches from bt to loud speaker to earpiece
• Bluetooth:
  • Device is on has music available and setup with the hardware below, using dialler or music app confirm the following:
    • [Speaker] A2DP while playing sound via music-app
    • [Hands Free/Car] HfP while doing a call
    • Car System switches from music to calls
    • Car system plays music
    • Car system transfers addressbook
    • Mouse Connect and triggers windows mode
    • Keyboard connects and prevents osk, (For supported hardware triggers windowed mode)
    • Phone is discoverable
• Wifi:
  • Trigger Flight mode ensure wifi is dropped, disable flight mode wifi is reenabled and can connect to the internet.
  • Device is on and connected to an ap, Walk out of range and back into range: confirm disconnect and reconnect
• Location:
  • Device is on, Location is active: (Using unav or here or google maps, depending on location)
    • Check AGPS give an instant position within 50 Metres
    • Check GPS kicks in after a while and track accurately for more than 3 minutes.
    • Attach to a pc adb shell in and watch -f /var/log/syslog, put the phone to sleep ensure that GPS is now stopped
• Screen Brightness control:
  • Device is on and usig the power indicator:
    • Check if the brightness control works as before
    • Set the brightness to automatic and cover the light sensor screen should dim
• External devices:
  • Hdmi out works with monitor
  • Athercast out (Turbo and Frieza)
  • Mtp in and out
  • ADB in and out
  • Device charges
  • SDCARD (where available)
    • Insert a card
    • Card is scanned and contents appear in scopes
    • Card can be safely unmounted using sdcard app
    • Card is removed and content is no longer available on scopes
    • Card is formatted using sdcard app