Touch Test SWAT
Welcome to the testing page of the Touch Testing SWAT. These pages provide up to date information of current testing activities for Touch until the release of Saucy, check back frequently.
Mailing List - The quality mailing list firstname.lastname@example.org is used to coordinate testing activities with all participants.
IRC - join the Ubuntu QA in #ubuntu-quality and and Ubuntu Touch #ubuntu-touch IRC channels on freenode.
This describes the daily process of testing. We will flash our devices, look for bugs, then look to write autopilot tests for any fixed bugs to prevent that bug from re-occurring.
Daily Image Testing
Install the current stable image
Flash your phone to the latest stable image (note: we want the "current" image of touch_ro). If you have not yet bootstrapped or unlocked your phone's bootloader, see the install page for more information.
$ phablet-flash ubuntu-system
In order to wipe clean and start fresh with the latest current image:
$ phablet-flash ubuntu-system --no-backup
Perform a system update
Alternatively, once you are running the ubuntu image you may perform a system update from the device itself. To do this, select 'system-settings' application, then click update. Press the download button, and once the download is completed, the install button. Note, currently there is a lack of visual feedback while performing this process, see Bug 1227110
Check to see what's changed
A list of changes between stable images can be found here. The list contains the list of changing packages.
Changes in current: http://people.canonical.com/~j-lallement/touch/changes/current/
Changes in pending: http://people.canonical.com/~j-lallement/touch/changes/
Use these changes to drive exploratory testing below.
* Run through the list of new features and changed areas of the phone, paying specific attention to spot regressions and verify the features are working.
* Perform smoke testing on a specific packageset of the phone.
* File bugs against any issues encountered
* Remember this is exploratory testing, so try and break things!
See the Reporting a Bug section below for details.
Add a testcase for reported bugs
Once testing is completed, review the list of reported bugs with the touch-needs-autopilot tag. Pick a testcase to automate using autopilot that tests the bug to ensure the same bug doesn't reappear. So we can track work happening on these bugs, follow this process while writing the test;
Remove the touch-needs-autopilot tag from the original bug
Open a new bug against the same project, tagged with qa-touch-automated
- Assign yourself to the bug and update progress as usual. When you release the test, close the bug with fix released.
Confirm an existing bug
Not finding any bugs yourself? Look at the Triaging link below and confirm bugs others have found.
Reporting a bug
All bugs filed should use the avengers tag. Omer has made available a tool to help with the process of filing a bug report. Please ensure you add the 'avengers' tag when filing. If you think the bug you are reporting is a good candidate for an automated test to prevent future regressions, you may also add touch-needs-autopilot to the bug.
What package should I file against?
File against the ubuntu source package for the failed component. See this page for a full broken out list of components.
Filing the Bug
Using Omer's tool
This is the recommended way to file bugs
Omer has created a tool to allow you to report a bug from your desktop, provided the phone is connected via usb cable. Download and save this file. Via the command line,
wget http://goo.gl/Irl3aY -O filephonebug chmod +x filephonebug
To run, pass the package name as the only argument. The tool will connect and grab logs from your device, and open a new bug in your desktop browser to file the bug.
For example if the phone dialer is causing issues you would do the following:
- Connect the phone via usb
Run the tool against the dialer-app package. Unsure of which package? Check this list
- Apport will run and collect logs and ask you 2 questions. Answer 'S' to send the report, and then '1' to launch a browser to file the report. The output will look like this:
$ ./filephonebug dialer-app *** Collecting problem information The collected information can be sent to the developers to improve the application. This might take a few minutes. ........................................................................................ 182 KB/s (14785 bytes in 0.078s) *** Send problem report to the developers? After the problem report has been sent, please fill out the form in the automatically opened web browser. What would you like to do? Your options are: S: Send report (14.1 KB) V: View report K: Keep report file for sending later or copying to somewhere else I: Cancel and ignore future crashes of this program version C: Cancel Please choose (S/V/K/I/C): s *** Uploading problem information The collected information is being sent to the bug tracking system. This might take a few minutes. 98% *** To continue, you must visit the following URL: https://bugs.launchpad.net/ubuntu/+source/dialer-app/+filebug/59dbaa1c-2162-11e3-a3d4-d485646cd9a4? You can launch a browser now, or copy this URL into a browser on another computer. Choices: 1: Launch a browser now C: Cancel Please choose (1/C): Choices: 1: Launch a browser now C: Cancel Please choose (1/C): 1
- The browser will launch and display a ready to file bug report. Finish filling in the description of the issue. When filing, make sure you include the steps needed for others to reproduce the issue, and what the result was versus what you expected the result to be.
There is a crash file in /var/crash
If the bug is a crash and there is a crash file in /var/crash, you can report it with apport.
1. Connect to the device with adb
$ adb shell
2. Check for any crash file in /var/crash
3. Report a bug with apport:
$ apport-cli /var/crash/name_of_crash_file.crash
4. Follow the instructions
5. To the question "What would you like to do? Your options are:", answer "S: Send report"
6. Wait for the upload to proceed
7. Upon upload you'll be presented with a prompt like:
*** To continue, you must visit the following URL: https://bugs.launchpad.net/ubuntu/+source/upstart-app-launch/+filebug/<UUID> You can launch a browser now, or copy this URL into a browser on another computer. Choices: 1: Launch a browser now C: Cancel
8. Copy the URL to a browser running on your desktop/laptop, it is more convenient than running a browser on the phone to report bug and proceed with the bug reporting process in launchpad
9. Then follow the usual tagging plan and triaging process
There is no crash file
1. Connect to the device with adb
$ adb shell
2. Find the right package (TODO: Document difference between preinstalled dpkg based packages and click package)
$ ubuntu-bug maliit-framework
3. Wait until data collection is done.
4. At the question:
What would you like to do? Your options are: S: Send report (4.3 KB) V: View report [...] https://bugs.launchpad.net/ubuntu/+source/maliit-framework/+filebug/<UUID>?
Press 'S' or 'K' if you want to copy the report to another machine (for example if networking is not enabled on the device).
3. If you're reporting from the device, on your local machine, click on the link or copy/paste it into your browser.
Once bugs have been filed they need to be confirmed, and ideally, have a defined scenario for recreating in order for developers to fix them. To help with triaging, simply read a bug report from the list below and try it on the latest build for your device. If you can recreate it, mark the bug status as confirmed.
Quick links to buglists
List of all reported Bugs
Tags are used to keep handy lists of the work being done. It lets us see the status of bugs and testcase automation.
What does each tag mean?
Used for filing bugs found during exploratory testing of ubuntu touch images
Used to tag bugs that are candidates for automation to prevent recurrence once fixed
Used to tag bugs that are being automated with autopilot
Tips and Tricks
Here are some helpful hints that will come in handy while testing; feel free to add more!
Switch from RO to RW
- Switch from RO to RW (to install additional packages for example):
- Remount RW
$ adb shell $ mount /dev/loop0 / -o remount,rw
- or touch writable_image
$ adb shell touch /userdata/.writable_image $ adb reboot
Take a screenshot
This is helpful for bug reporting. Note this WILL NOT work if you are running Mir.
$ adb shell /system/bin/screencap /data/screenshot.png $ adb pull /data/screenshot.png ~/screenshot.png
You can resize with convert from package imagemagick:
$ convert screenshot.png -resize 50% screenshot.png
Which build am I running?
- Find out what build you are running
$ adb shell cat /etc/media-info
Enable MIR by default
Switch to Mir enabled, SurfaceFlinger disabled
$ adb shell touch /home/phablet/.display-mir $ adb reboot to switch back: $ adb shell rm /home/phablet/.display-mir $ adb reboot
- MIR is running if no surfaceflinger process is running and the socket /tmp/mir_socket is present
Enable gprs if it doesn't come up automatically
- GPRS A simple work around while this is not working is to do:
$ adb shell restart network-manager
Turn back on intro
- Turn back on the initial demo that instructs how to use the phone via swiping
dbus-send --system --print-reply --dest=org.freedesktop.Accounts /org/freedesktop/Accounts/User32011 org.freedesktop.DBus.Properties.Set string:com.canonical.unity.AccountsService string:demo-edges variant:boolean:true
Retracing a crash on phone
- currently ARM crashes cannot be retraced by Ubuntu retracers, a way to generate nice stack trace from crash files in /var/crash/ and usable by developers is to use apport retrace directly on the phone.
* Add link to reference documentation (how to flash, specific testing like MIR, how to troubleshoot, ...)
* Add list of who's testing which feature sets / areas