## page was renamed from LaptopTestingTeam/Old/SonyVGN-UX70 ## page was copied from LaptopTestingTeam/SonyVGN-UX70 '''Sony VGN-UX70:''' This is a Japanese Model, so it has slightly more features than the equivalent models sold in the US under the models VGN-UX180P and VGN-UX280P and VGN-UX280P-7 ||''' Device '''|||| '''Supported? '''|||| '''Worked out of the box? '''|||| '''Works after manual configuration? '''|||| '''Notes '''|| || X11 |||| Yes |||| Yes |||| N/A || Correct resolution || || External Monitor |||| Yes |||| No |||| Yes |||| Needed dual head setup || || LAN |||| Yes |||| Yes |||| N/A |||| Needs some tuning, since it needs the dongle, it fills dmesg log with lan connected/disconnected, suggested solution is to disable it on boot and enable it manually when needed || || Wifi |||| Yes |||| Yes |||| N/A |||| Needs to be tuned, is not enabled on default at startup || || Bluetooth |||| Not tested |||| Not tested |||| N/A |||| Work in progress|| || Biometric Finger print reader |||| Yes |||| No |||| Yes |||| Needed some setup and additional packages. followed instructions on http://www.thinkwiki.org/wiki/How_to_enable_the_fingerprint_reader || || Touch screen |||| Yes |||| No |||| Yes |||| it attaches as a USB input device, manufacturer is GUNZE instructions on http://ar.linux.it/software/gunzets/#Usb%20Driver || || Webcam |||| Unknown/ Not tested |||| N/A |||| N/A |||| || || TV Tuner |||| Unknown/ Not Tested |||| N/A |||| N/A |||| Japanese TV Tuner will not work in the UK so can't confirm if it's working anyway || || Contactless smartcard reader |||| Unknown/ Not Tested |||| N/A |||| N/A |||| Cannot confirm if it works, I don't have any contactless smart cards to actually try, Japan specific device. || || CF reader |||| Unknown/ Not Tested |||| N/A |||| N/A |||| || Contact the author SubhiHashwa '''Specifications:''' * Intel Duo Core Solo U1300 （1.06 GHz） * 30GB Harddisk * 512MB RAM * Windows XP Home * Intel GFX accelerator 950 (128MB shared) * Internal : 1024×600 4.5" Touch Screen * External output :1600x1200, 1360ｘ768, 1280x1024, 1280x800, 1280x768, 1024ｘ768, 1024ｘ600, 800x600 * Ports: Hi-Speed USB(USB2.0) x 1, headphone jack x 1, Mic Jack x 1, DC IN x 1(for AC adapter), I/O conector x 1 * Connectivity: 54Mbits IEEE802.11a/b/g, WPA, Wi-Fi compatible, Bluetooth (Bluetooth2.0+EDR compatible), 10/100 Mbps LAN (Via Dongle) * Additional storage: MemoryStick PRO Duo slot x1, CF Slot x1 (Type II) * Biometrics Security: Finger print reader * Camera: Web Camera x2 : 31,000 pixel internal camera (f=2.6mm F4). 1.3 Mega pixel external camera (f=3.8mm F4) * Contactless Smart card reader (Japanese Felecia) see http://www.sony.net/Products/felica/csy/index.html * Japanese TV Tuner '''dmesg output:''' {{{ [17179569.184000] Linux version 2.6.17-10-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tu e Dec 5 22:28:26 UTC 2006 (Ubuntu 2.6.17-10.34-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000001f680000 (usable) [17179569.184000] BIOS-e820: 000000001f680000 - 000000001f694000 (ACPI data) [17179569.184000] BIOS-e820: 000000001f694000 - 000000001f700000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 502MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f64d0 [17179569.184000] On node 0 totalpages: 128640 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 124544 pages, LIFO batch:31 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6400 [17179569.184000] ACPI: RSDT (v001 Sony N2 0x20060602 PTL 0x00000000) @ 0x1f68ea95 [17179569.184000] ACPI: FADT (v002 Sony N2 0x20060602 PTL 0x0000005a) @ 0x1f693dec [17179569.184000] ACPI: MADT (v001 Sony N2 0x20060602 PTL 0x0000005a) @ 0x1f693e70 [17179569.184000] ACPI: BOOT (v001 Sony N2 0x20060602 PTL 0x00000001) @ 0x1f693fd8 [17179569.184000] ACPI: MCFG (v001 Sony N2 0x20060602 PTL 0x0000005a) @ 0x1f693f10 [17179569.184000] ACPI: MADT (v001 Sony N2 0x20060602 PTL 0x00000000) @ 0x1f693f7e [17179569.184000] ACPI: SSDT (v001 Sony N2 0x20060602 PTL 0x20050624) @ 0x1f68f1ea [17179569.184000] ACPI: SSDT (v001 Sony N2 0x20060602 PTL 0x20050624) @ 0x1f68efbb [17179569.184000] ACPI: SSDT (v001 Sony N2 0x20060602 PTL 0x20050624) @ 0x1f68ead9 [17179569.184000] ACPI: DSDT (v001 Sony N2 0x20060602 PTL 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: 2 duplicate APIC table ignored. [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes) [17179569.184000] Detected 1064.236 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.340000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.340000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [17179569.356000] Memory: 500456k/514560k available (1910k kernel code, 13536k reserved, 1069k data, 308k init, 0k highmem) [17179569.356000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.436000] Calibrating delay using timer specific routine.. 2132.00 BogoMIPS (lpj=4264000) [17179569.436000] Security Framework v1.0.0 initialized [17179569.436000] SELinux: Disabled at boot. [17179569.436000] Mount-cache hash table entries: 512 [17179569.436000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179569.436000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179569.436000] monitor/mwait feature present. [17179569.436000] using mwait in idle threads. [17179569.436000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179569.436000] CPU: L2 cache: 2048K [17179569.436000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 [17179569.436000] Checking 'hlt' instruction... OK. [17179569.452000] SMP alternatives: switching to UP code [17179569.452000] Freeing SMP alternatives: 16k freed [17179569.452000] checking if image is initramfs... it is [17179570.276000] Freeing initrd memory: 5322k freed [17179570.276000] ACPI: Core revision 20060707 [17179570.276000] ACPI: Looking for DSDT ... not found! [17179570.280000] ACPI: System reset via FADT Reset Register is supported [17179570.280000] machine_reset = acpi_machine_reset [17179570.312000] CPU0: Intel Genuine Intel(R) CPU U1300 @ 1.06GHz stepping 08 [17179570.312000] Total of 1 processors activated (2132.00 BogoMIPS). [17179570.312000] ENABLING IO-APIC IRQs [17179570.312000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179570.456000] Brought up 1 CPUs [17179570.456000] migration_cost=0 [17179570.456000] NET: Registered protocol family 16 [17179570.456000] EISA bus registered [17179570.456000] ACPI: bus type pci registered [17179570.456000] PCI: Using MMCONFIG [17179570.456000] Setting up standard PCI resources [17179570.464000] ACPI: Interpreter enabled [17179570.464000] ACPI: Using IOAPIC for interrupt routing [17179570.464000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.464000] PCI: Probing PCI hardware (bus 00) [17179570.544000] Boot video device is 0000:00:02.0 [17179570.544000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179570.548000] PCI: Transparent bridge - 0000:00:1e.0 [17179570.548000] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#08) (try 'pci=assign-busses') [17179570.548000] Please report the result to linux-kernel to fix this permanently [17179570.548000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.556000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [17179570.556000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [17179570.560000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [17179570.564000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [17179570.564000] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [17179570.564000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled. [17179570.564000] ACPI: PCI Interrupt Link [LNKD] (IRQs *10) [17179570.564000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. [17179570.564000] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [17179570.564000] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [17179570.568000] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [17179570.568000] ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode. [17179570.568000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.568000] pnp: PnP ACPI init [17179570.572000] pnp: PnP ACPI: found 10 devices [17179570.572000] PnPBIOS: Disabled by ACPI PNP [17179570.572000] PCI: Using ACPI for IRQ routing [17179570.572000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.572000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [17179570.572000] PCI: Bridge: 0000:00:1c.0 [17179570.572000] IO window: 2000-2fff [17179570.572000] MEM window: d2000000-d3ffffff [17179570.572000] PREFETCH window: d0000000-d1ffffff [17179570.572000] PCI: Bridge: 0000:00:1c.1 [17179570.572000] IO window: 3000-3fff [17179570.572000] MEM window: d4000000-d40fffff [17179570.572000] PREFETCH window: disabled. [17179570.572000] PCI: Bus 8, cardbus bridge: 0000:07:04.0 [17179570.572000] IO window: 00004000-000040ff [17179570.572000] IO window: 00004400-000044ff [17179570.572000] PREFETCH window: 30000000-31ffffff [17179570.572000] MEM window: 32000000-33ffffff [17179570.572000] PCI: Bridge: 0000:00:1e.0 [17179570.572000] IO window: 4000-4fff [17179570.572000] MEM window: d4100000-d41fffff [17179570.572000] PREFETCH window: 30000000-31ffffff [17179570.572000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179570.572000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179570.572000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 [17179570.572000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179570.572000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179570.572000] ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 20 (level, low) -> IRQ 185 [17179570.572000] NET: Registered protocol family 2 [17179570.600000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [17179570.600000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [17179570.600000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [17179570.600000] TCP: Hash tables configured (established 16384 bind 8192) [17179570.600000] TCP reno registered [17179570.600000] Simple Boot Flag at 0x37 set to 0x1 [17179570.600000] audit: initializing netlink socket (disabled) [17179570.600000] audit(1166614732.600:1): initialized [17179570.600000] VFS: Disk quotas dquot_6.5.1 [17179570.600000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.600000] Initializing Cryptographic API [17179570.600000] io scheduler noop registered [17179570.600000] io scheduler anticipatory registered [17179570.600000] io scheduler deadline registered [17179570.600000] io scheduler cfq registered (default) [17179570.600000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179570.600000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179570.600000] assign_interrupt_mode Found MSI capability [17179570.600000] Allocate Port Service[0000:00:1c.0:pcie00] [17179570.600000] Allocate Port Service[0000:00:1c.0:pcie02] [17179570.600000] Allocate Port Service[0000:00:1c.0:pcie03] [17179570.600000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 [17179570.600000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179570.600000] assign_interrupt_mode Found MSI capability [17179570.600000] Allocate Port Service[0000:00:1c.1:pcie00] [17179570.600000] Allocate Port Service[0000:00:1c.1:pcie02] [17179570.600000] Allocate Port Service[0000:00:1c.1:pcie03] [17179570.600000] isapnp: Scanning for PnP cards... [17179570.956000] isapnp: No Plug & Play device found [17179570.984000] Real Time Clock Driver v1.12ac [17179570.984000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179570.988000] mice: PS/2 mouse device common for all mice [17179570.988000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.988000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.988000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.988000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179570.996000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179570.996000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.996000] EISA: Probing bus 0 at eisa.0 [17179570.996000] Cannot allocate resource for EISA slot 1 [17179570.996000] Cannot allocate resource for EISA slot 2 [17179570.996000] Cannot allocate resource for EISA slot 3 [17179570.996000] Cannot allocate resource for EISA slot 4 [17179570.996000] EISA: Detected 0 cards. [17179571.000000] TCP bic registered [17179571.000000] NET: Registered protocol family 1 [17179571.000000] NET: Registered protocol family 8 [17179571.000000] NET: Registered protocol family 20 [17179571.000000] Using IPI No-Shortcut mode [17179571.000000] ACPI: (supports S0 S3 S4 S5) [17179571.000000] Freeing unused kernel memory: 308k freed [17179571.068000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179572.156000] Capability LSM initialized [17179572.200000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [17179572.200000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179572.200000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707] [17179572.200000] ACPI: Getting cpuindex for acpiid 0x1 [17179572.200000] ACPI: Thermal Zone [ATF0] (49 C) [17179572.204000] ACPI: Thermal Zone [DTS0] (45 C) [17179572.204000] ACPI: Thermal Zone [DTS1] (45 C) [17179572.616000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179572.616000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 217 [17179572.616000] ICH7: chipset revision 2 [17179572.616000] ICH7: not 100% native mode: will probe irqs later [17179572.616000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio [17179572.616000] Probing IDE interface ide0... [17179572.904000] hda: TOSHIBA MK3008GAL, ATA DISK drive [17179573.576000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.608000] hda: max request size: 512KiB [17179573.608000] hda: 58605120 sectors (30005 MB), CHS=16383/255/63, UDMA(100) [17179573.608000] hda: cache flushes supported [17179573.608000] hda: hda1 hda2 hda3 < hda5 > [17179574.040000] Probing IDE interface ide1... [17179574.176000] usbcore: registered new driver usbfs [17179574.176000] usbcore: registered new driver hub [17179574.180000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 225 [17179574.180000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179574.180000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179574.180000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [17179574.180000] ehci_hcd 0000:00:1d.7: debug port 1 [17179574.180000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179574.180000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xd4544000 [17179574.184000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179574.184000] usb usb1: configuration #1 chosen from 1 choice [17179574.184000] hub 1-0:1.0: USB hub found [17179574.184000] hub 1-0:1.0: 8 ports detected [17179574.184000] USB Universal Host Controller Interface driver v3.0 [17179574.188000] ieee1394: Initialized config rom entry `ip1394' [17179574.288000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 177 [17179574.288000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179574.288000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179574.288000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [17179574.288000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001820 [17179574.288000] usb usb2: configuration #1 chosen from 1 choice [17179574.288000] hub 2-0:1.0: USB hub found [17179574.288000] hub 2-0:1.0: 2 ports detected [17179574.392000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233 [17179574.392000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179574.392000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179574.392000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [17179574.392000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001840 [17179574.392000] usb usb3: configuration #1 chosen from 1 choice [17179574.392000] hub 3-0:1.0: USB hub found [17179574.392000] hub 3-0:1.0: 2 ports detected [17179574.496000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 50 [17179574.496000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179574.496000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179574.496000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [17179574.496000] uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001860 [17179574.496000] usb usb4: configuration #1 chosen from 1 choice [17179574.496000] hub 4-0:1.0: USB hub found [17179574.496000] hub 4-0:1.0: 2 ports detected [17179574.528000] usb 1-2: new high speed USB device using ehci_hcd and address 2 [17179574.600000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 177 [17179574.600000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179574.600000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179574.600000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [17179574.600000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880 [17179574.600000] usb usb5: configuration #1 chosen from 1 choice [17179574.600000] hub 5-0:1.0: USB hub found [17179574.600000] hub 5-0:1.0: 2 ports detected [17179574.660000] usb 1-2: configuration #1 chosen from 1 choice [17179574.660000] hub 1-2:1.0: USB hub found [17179574.660000] hub 1-2:1.0: 4 ports detected [17179574.704000] ACPI: PCI Interrupt 0000:07:04.1[B] -> GSI 21 (level, low) -> IRQ 50 [17179574.752000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[d4105000-d41057ff] Max Packet=[2048] IR/IT contexts=[4/8] [17179574.868000] Attempting manual resume [17179574.912000] kjournald starting. Commit interval 5 seconds [17179574.912000] EXT3-fs: mounted filesystem with ordered data mode. [17179575.188000] usb 1-4: new high speed USB device using ehci_hcd and address 4 [17179575.320000] usb 1-4: configuration #1 chosen from 1 choice [17179575.744000] usb 1-6: new high speed USB device using ehci_hcd and address 6 [17179575.876000] usb 1-6: configuration #1 chosen from 1 choice [17179576.024000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030226532e] [17179576.244000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [17179576.416000] usb 3-1: configuration #1 chosen from 1 choice [17179576.788000] usb 4-1: new full speed USB device using uhci_hcd and address 2 [17179576.964000] usb 4-1: configuration #1 chosen from 1 choice [17179577.312000] usb 1-2.1: new full speed USB device using ehci_hcd and address 7 [17179577.420000] usb 1-2.1: configuration #1 chosen from 1 choice [17179577.420000] hub 1-2.1:1.0: USB hub found [17179577.420000] hub 1-2.1:1.0: 3 ports detected [17179577.740000] usb 1-2.4: new low speed USB device using ehci_hcd and address 8 [17179577.852000] usb 1-2.4: configuration #1 chosen from 1 choice [17179578.052000] usb 1-2.1.1: new full speed USB device using ehci_hcd and address 9 [17179578.144000] usb 1-2.1.1: configuration #1 chosen from 1 choice [17179578.344000] usb 1-2.1.3: new low speed USB device using ehci_hcd and address 10 [17179578.440000] usb 1-2.1.3: configuration #1 chosen from 1 choice [17179592.496000] hw_random: cannot enable RNG, aborting [17179592.580000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 233 [17179592.580000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179592.656000] Linux agpgart interface v0.101 (c) Dave Jones [17179592.796000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179592.948000] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... [17179593.132000] agpgart: Detected an Intel 945GM Chipset. [17179593.132000] agpgart: Detected 7932K stolen memory. [17179593.152000] agpgart: AGP aperture is 256M @ 0xc0000000 [17179593.152000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179593.272000] ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 20 (level, low) -> IRQ 185 [17179593.272000] Yenta: CardBus bridge found at 0000:07:04.0 [104d:8203] [17179593.272000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179593.272000] Yenta: Routing CardBus interrupts to PCI [17179593.272000] Yenta TI: socket 0000:07:04.0, mfunc 0x01a21b22, devctl 0x64 [17179593.536000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185 [17179593.536000] Socket status: 30000006 [17179593.536000] Yenta: Raising subordinate bus# of parent bus (#07) from #08 to #0b [17179593.536000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [17179593.536000] cs: IO port probe 0x4000-0x4fff: clean. [17179593.536000] pcmcia: parent PCI bridge Memory window: 0xd4100000 - 0xd41fffff [17179593.536000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff [17179593.644000] ACPI: PCI Interrupt 0000:07:04.2[C] -> GSI 22 (level, low) -> IRQ 217 [17179593.952000] input: DualPoint Stick as /class/input/input1 [17179593.964000] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input2 [17179594.176000] ieee80211_crypt: registered algorithm 'NULL' [17179594.204000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [17179594.204000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179594.216000] usbcore: registered new driver hiddev [17179594.236000] input: GUNZE USB Touch Panel as /class/input/input3 [17179594.236000] input: USB HID v1.10 Mouse [GUNZE USB Touch Panel] on usb-0000:00:1d.1-1 [17179594.236000] input: Silitek Gateway Generic USB Hub as /class/input/input4 [17179594.236000] input: USB HID v1.10 Keyboard [Silitek Gateway Generic USB Hub] on usb-0000:00:1d.7-2.1.1 [17179594.236000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input5 [17179594.236000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-2.1.3 [17179594.236000] usbcore: registered new driver usbhid [17179594.236000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179594.452000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177 [17179594.452000] PCI: Setting latency timer of device 0000:06:00.0 to 64 [17179594.452000] sky2 v1.6.1 addr 0xd4000000 irq 177 Yukon-FE (0xb7) rev 1 [17179594.452000] sky2 eth0: addr 00:13:a9:3f:ba:e7 [17179594.604000] ts: Compaq touchscreen protocol output [17179594.740000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp [17179594.740000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [17179594.740000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179594.740000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17179594.740000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [17179594.980000] cs: IO port probe 0x100-0x3af: clean. [17179594.984000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179594.984000] cs: IO port probe 0x820-0x8ff: clean. [17179594.984000] cs: IO port probe 0xc00-0xcf7: clean. [17179594.984000] cs: IO port probe 0xa00-0xaff: clean. [17179596.104000] lp: driver loaded but no devices found [17179596.196000] SCSI subsystem initialized [17179596.208000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179596.208000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179596.236000] Adding 200772k swap on /dev/disk/by-uuid/43bbc98e-a0bd-47cc-bdf9-dffcd7a5a754. Priority:-1 extents:1 across:200772k [17179596.296000] EXT3 FS on hda2, internal journal [17179596.788000] ipw3945: Radio Frequency Kill Switch is On: [17179596.788000] Kill switch must be turned off for wireless networking to work. [17179598.100000] NET: Registered protocol family 17 [17179599.312000] ACPI: AC Adapter [ACAD] (on-line) [17179599.360000] ACPI: Battery Slot [BAT1] (battery present) [17179599.392000] ACPI: Power Button (CM) [PWRB] [17179599.572000] ibm_acpi: ec object not found [17179599.608000] pcc_acpi: loading... [17179599.660000] ACPI Sony Notebook Control Driver v0.2 successfully installed [17179603.368000] [drm] Initialized drm 1.0.1 20051102 [17179603.372000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179603.376000] [drm] Initialized i915 1.5.0 20060119 on minor 0 [17179604.944000] apm: BIOS not found. [17179610.048000] sonypi: Sony Programmable I/O Controller Driver v1.26. [17179610.052000] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [17179610.052000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [17179610.052000] sonypi: device allocated minor is 62 [17179610.132000] input: Sony Vaio Jogdial as /class/input/input6 [17179610.176000] input: Sony Vaio Keys as /class/input/input7 [17179610.500000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 647) [17179610.548000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 658) [17179610.600000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 660) [17179610.652000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 647) [17179614.092000] NET: Registered protocol family 10 [17179614.092000] lo: Disabled Privacy Extensions [17179614.092000] IPv6 over IPv4 tunneling driver [17179614.444000] Bluetooth: Core ver 2.8 [17179614.444000] NET: Registered protocol family 31 [17179614.444000] Bluetooth: HCI device and connection manager initialized [17179614.444000] Bluetooth: HCI socket layer initialized [17179614.496000] Bluetooth: L2CAP ver 2.8 [17179614.496000] Bluetooth: L2CAP socket layer initialized [17179614.524000] Bluetooth: RFCOMM socket layer initialized [17179614.524000] Bluetooth: RFCOMM TTY layer initialized [17179614.524000] Bluetooth: RFCOMM ver 1.7 [17179766.348000] sky2 eth0: enabling interface [17179766.352000] ADDRCONF(NETDEV_UP): eth0: link is not ready [17179768.032000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none [17179768.032000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [17179778.840000] eth0: no IPv6 routers present [17182296.940000] apm: BIOS not found. [17182505.608000] ibm_acpi: ec object not found [17182507.028000] apm: BIOS not found. [17193713.148000] sky2 eth0: Link is down. [17193714.812000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none }}} '''lspci output:''' {{{ 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 15) 07:04.0 CardBus bridge: Texas Instruments Unknown device 8039 07:04.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a 07:04.2 Mass storage controller: Texas Instruments Unknown device 803b }}} '''lsusb output:''' {{{ Bus 005 Device 001: ID 0000:0000 Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0637:0003 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 009: ID 0443:001c Gateway, Inc. Bus 001 Device 006: ID 05ca:1832 Ricoh Co., Ltd Bus 001 Device 007: ID 0443:001d Gateway, Inc. Bus 001 Device 010: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 001 Device 008: ID 054c:01bb Sony Corp. Bus 001 Device 004: ID 054c:0279 Sony Corp. Bus 001 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub Bus 001 Device 001: ID 0000:0000 }}}