|Deletions are marked like this.||Additions are marked like this.|
|Line 88:||Line 88:|
|''((( Me neither i didnt fill in these details, but followed the rest of the guide and it worked fine:) )))''|
|Line 367:||Line 368:|
What about encrypt passwords = no ? Windows is setup not to use network passwords by default so I think creating a network user is not right.
Work in progress (feel free to add notes)
What is Samba and when do I need it?
attachment:IconsPage/IconSambaShares.png To make a long story short : samba is a set of tools to share files and printers with computers running Windows. It implements the SMB network protocol, which is the heart of Windows networking.
You need samba to :
- act as a client with Windows servers : access file shares and remote printers,
- act as a server for Windows (or samba) clients : share folders and printers, including PDF pseudo-printers so all the computers in your network may write PDF files,
- act as a domain controller in a windows network (authenticating users, etc.)
- do some more complex stuff, such as using a windows domain controller to authenticate the users of a linux/un*x machine...
The samba project was started in 1992 by Andrew TRIDGELL. It's now an important piece of software in the linux world when it come to make windows and linux machines interoperate.
More information about Samba can be found at http://www.samba.org. Also check out the links at the bottom of this page.
Do you need Samba? Maybe not:
If you want your Windows computer to be able to use (via a network) a printer that is attached to a Linux computer, you don't need Samba. CUPS can be configured to make the printer accessible to the network. (See the [https://wiki.ubuntu.com/FrequentlyAskedQuestions#head-31236fe6767d32d8849819b22f0da7da5026023b question in the FAQ].)
- You don't need Samba to share directories between two Linux computers. You can use NFS.
Installing samba is really simple, just type
sudo apt-get update sudo apt-get install samba
or use synaptic (see SynapticHowto)
Configuring your computer
Start the network configurator using the following menu:
Computer -> System Configuration -> Networking
Or Ubuntu 5.04 "Hoary Hedgehog" Release:
System -> Administration -> Networking
You will need the General tab, in the middle.
Time to fill in your settings:
Host Settings Hostname: <yourcomputer> Domain name: <yourdomain>
Windows Networking Tick Enable windows networking Description: <whateveryouwant> Domain/Workgroup: <yourdomainorworkgroup>
If you want tick WINS server <thenameoripaddressofyourwinsserver>
Note: If you do not know, ask your network-administrator. Typical settings for the workgroup field are "mshome" or "workgroup".
The important settings here are your hostname, which should be filled in already, and the domain/workgroup. Press OK on both windows and the first part of cooperating with windows-machines is done.
You may also edit the file "/etc/samba/smb.conf" manually, and then use "/etc/init.d/samba" to stop and start the service again.
(((Q: I don't have a 'Windows Networking' section, only Hostname and Domain-name. What do I do now?))) ((( Me neither i didnt fill in these details, but followed the rest of the guide and it worked fine:) )))
Browsing samba shares
Ubuntu and Gnome make it easy to access files on a windows network share.
Open the Computer Menu, then click on "Network". You'll see a "windows network" icon, open it. The next window shows all the domains/workgroups found in your network. Inside each domain/workgroup you get all the computers in it (that is, those sharing something !). Double-click on a computer icon to access its shares and files. Could it be easier ?
Before showing a computer's shares, your system may prompt you for a name and password. Fill in the form with the credentials of a valid user for the computer you're connecting to. You may additionally store that password in your keyring for convenience.
Note: The default installation of Samba does not synchronize passwords. You may have to run "smbpasswd" for each user that needs to have access to his Ubuntu home directory from Microsoft Windows.
Mounting a samba share
Mounting a share on the local filesystem allows you to work around programs that do not yet use GnomeVFS to browse remote shares transparently. To mount a samba share, first install smbfs:
sudo apt-get update sudo apt-get install smbfs
To allow non root accounts to mount shares, change the permissions on the smbmnt program thus:
sudo chmod u+s /usr/bin/smbmnt
The following will mount the myshare folder on myserver to /home/yourusrname/mnt:
smbmount //myserver/myshare /home/yourusrname/mnt
In order to have a share mounted automatically every time you reboot, you need to do the following:
Open a shell as root
Create a file containing your Windows/Samba user account details:
...it should contain two lines as follows:
username = george password = secret
Change the permissions on the file for security:
chmod 0600 /etc/samba/user
Now create a directory where you want to mount your share (e.g. /mnt/data):
Now edit the file system table (/etc/fstab) and add a line as follows:
//server/share /mnt/data smbfs credentials=/etc/samba/user,rw,uid=bob 0 0
...where 'bob' is the non-root user you log into ubuntu with, 'server' is the name or address of the windows machine and 'share' is the name of the share.
To mount the share now, just use the following command as root. It will mount automatically on subsequent reboots.
to be continued...
Configuring your computer as a server
The next part does not have a good graphical tool yet, unfortunately, so we must use the command line. It is not difficult, just be careful with typos.
First open a terminal: Applications > System Tools > Terminal and open the file smb.conf
sudo nano -w /etc/samba/smb.conf
How to Save: To save in nano use "ctrl/o" than "ctrl/x".
Tip: Replacing nano with gedit gives you a nice graphical editor.
The file *smb.conf* is divided in several sections:
Global Settings Debugging/Accounting Authentication Printing File sharing Misc Share Definitions
Let's start with Global Settings. Here you will see several lines, which you can also see in the graphical networktool like workgroup and wins server. If you changed everything to your liking already then you can skip this section, if not change to what you need. If you do not know what items mean, leave them be and read the relevant part in the real samba-howto http://www.samba.org/samba/docs/using_samba/ch06.html instead of randomly changing them. It will save you trouble-shooting later.
The important part for us is File sharing. We need to change:
![homes] comment = Home Directories browseable = no # By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. writable = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. directory mask = 0700
This describes your /home folder. Usually you want to share this folder in a home-environment, because these are the files you want to share. To do so, make the following changes:
![homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. writable = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. directory mask = 0775
This finishes sharing your /home folder. The last thing we need to do is fixing a user.
Add users who can access your shares with the 'smbpasswd' command.
bash:~$ sudo smbpasswd -a username New SMB password: Retype new SMB password: Added user username.
Reload Samba for every change to users/passwords or 'smb.conf'
bash:~$ sudo /etc/init.d/samba reload
That's the basis of Samba file-sharing. Please leave your comments about what else is needed here.
Complicating things a little
We started with the base of samba file-sharing. The above-mentioned items should be enough to get you started. Next we will add details that you might or might not need.
If you have more the one networkcard
If you have more the one networkcard (or interface) then you have to define where you want samba to run. In smb.conf under the [global] section, add:
"interfaces = 127.0.0.1, 192.168.0.31/24" "bind interfaces only = yes"
The first address (127.0.0.1), is a loopback network connection (it's your own machine). The second address (192.168.0.31), is the address of the card you want samba to run on, the second number (24) is the subnet default for a CLASS-C network. It may vary depending on your network.
With "bind interfaces only" you limit which interfaces on a machine will serve SMB requests.
You can limit which IP address can connect to your Samba server adding these lines:
"hosts allow = 127.0.0.1, 192.168.0.31, 192.168.0.32" "hosts deny = 0.0.0.0/0"
The loopback address must be present in the first line. The second line deny access from all IP address not in the first line.
A common problem when attempting to access a Samba share from a Windows computer is "System Error 53" after attempting to "Net Use".
The first thing you should do, before looking into your conf files, is ensure that the directory you are sharing actually exists.
http://www.samba.org/ The samba web site
http://us4.samba.org/samba/docs/using_samba/toc.html "Using Samba", by Ts, Eckstein, and Collier-Brown (O'Reilly)
http://www.linuxorbit.com/howto/sambahowto.php3 Another [Dashboard]
You could say something about shares-admin, which lets you add shares to the samba server.
From MaartenJongepier Tue Dec 28 17:06:24 +0000 2004 From: Maarten Jongepier Date: Tue, 28 Dec 2004 17:06:24 +0000 Subject: smb:// protocol Message-ID: <20041228170624+0000@https://www.ubuntulinux.org>
You doesn't always need samba, isn't is? You can also use smb://windows-compu/share. That works too I thought
Not much here about how to use a Windows printer from Linux. I figured out how to get my Ubuntu machine to access the USB printer (HP LaserJet 1012) on my Windows XP machine, so I'll post that here (at least I will be able to find this when I forget how I did it).
1. Installed the HP LaserJet 1012 on the XP box using the CD that came with the printer.
2. Shared the printer as "LJ1012" (or whatever you want to call it).
3. Created a user named "Guest" (with no password) and added that user under the Security tab for the printer.
4. On Ubuntu, from the command line, entered: sudo adduser cupsys shadow (this is absolutely KEY!!!)
5. Downloaded the best driver (HP-LaserJet_1012-pxl1010.ppd) from linuxprinting.org and copied to /usr/share/cups/model/foomatic-ppds/HP/
6. In Firefox, went to localhost:631 (for Cups)
7. Add Printer - when prompted, logged in as the primary user (my name, not root), with my usual password. This (plus step 4) gets around the problem of there not being a 'root' account in Ubuntu.
8. Chose Windows Printer (Samba) from Add Printer dialogs (way at the bottom of the list).
9. Used the network address smb://guest@WINMACHINE/LJ1012
10. Using the Gnome printer applet, adjusted the paper size to US Letter (applet sometimes freezes, but does not seem to do any harm).
What a friggin PITA, but it WORKED. This printer is a great buy.
From dturnbull Mon Mar 28 07:53:18 +0100 2005 From: dturnbull Date: Mon, 28 Mar 2005 07:53:18 +0100 Subject: Bleh, had to edit printers.conf Message-ID: <20050328075318+0100@https://www.ubuntulinux.org>
I wanted to use the printer on a Windows system and had no luck with the GUI or the HTTP configuration interfaces. I ended up editing /etc/cups/printers.conf and changing (for example)
After that everything else was configurable from the Gnome GUI. This was in Hoary preview.
When the text mentions using smbpasswd, it should be noted that the user added as username has to exist as a Linux user as well.
From:me What about encrypt passwords = no ? Windows is setup not to use network passwords by default so I think creating a network user is not right.