Differences between revisions 12 and 13
Revision 12 as of 2006-04-25 00:54:04
Size: 5040
Editor: ip68-9-93-17
Revision 13 as of 2006-04-26 13:23:59
Size: 5111
Editor: ip68-9-93-17
Deletions are marked like this. Additions are marked like this.
Line 19: Line 19:
You may need to rerun qsynaptic each time you restart X. You may need to run {{{qsynaptic -r}}} each time you restart X. Go to System>Preferences>Sessions>Startup Programs> and add it.

For Newbies

On laptops, the [ touchpad] is the built-in mouse. "Synaptics touchpad" should not be confused with "Synaptic", the Ubuntu Package Manager, or Graphical User Interface for "apt-get" in a terminal.

In Breezy(5.10), laptops with a synaptics touchpad should work out of the box. Go to a terminal and grep (look inside) your /etc/X11/xorg.conf file:

grep Id /etc/X11/xorg.conf

If one of the lines is:

        Identifier      "Synaptics Touchpad"

then you have a Synaptics Touchpad.

qsynaptics (or in KDE ksynaptics) is a GUI which allows you to configure your touchpad. At a terminal, enter:

sudo apt-get install qsynaptic

You may need to run qsynaptic -r each time you restart X. Go to System>Preferences>Sessions>Startup Programs> and add it.

Turning Synaptics Touchpads On/Off with a shortcut key

You may wish to turn the touchpad on or off so that it doesn't interfere with typing when using a USB or other mouse.

Use following steps:

Step 1

from a terminal, edit /etc/xorg.conf

sudo gedit /etc/X11/xorg.conf

and look for the following section of code:

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "HorizScrollDelta"      "0"

and add one more Option at the End of the Section:

        Option          "SHMConfig"             "on"

If you are using an Alps-Touchpad, which you can find out by typing

cat /proc/bus/input/devices

your code section should look like this

Section "InputDevice"
        Driver          "synaptics"
        Identifier      "TouchPad"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/input/event2"
        Option          "Protocol"              "event"
        Option          "SHMConfig"             "on"

You can define some parameters which influence the behaviour of your touchpad. These parameters are presented already in []. You can check if your touchpad works correct and you have the correct parameters with

synclient -m l

If everything works fine, the position of your finger will be updated everytime you move it and based on this information you can set your parameters.

Step 2

Next we will create 3 files - a bash script to turn the touchpad on, one to turn it on, and a python script to use a single key combination for both. At a terminal, cd to /usr/local/bin and make a new file:

cd /usr/local/bin
sudo gedit tpoff

and paste the following code in the file, save it and close it.


synclient touchpadoff=1 

again, make a new file:

sudo gedit tpon

paste the following, save and close:


synclient touchpadoff=0

once again, make a new file:

sudo gedit

paste the following, save and close

import os
import string

def ReadFile():
        myfile = open('/tmp/synclient.tmp', 'rb')
        for line in myfile:
def TestString(string):
        for word in string.split():
                if word == "TouchpadOff":
                        setting = string.split()

def ChangeState(current):    
        if current == "0":
                os.system("synclient touchpadoff=1")
                os.system("synclient touchpadoff=0")
        os.system("rm /tmp/synclient.tmp")

def Main():
os.system("synclient -l > /tmp/synclient.tmp")

and finally, change the permissions of these three files:

sudo chmod 777 tpon tpoff

Step 3

Next, edit your sudoers files to allow you to execute both scripts without a password.

sudo visudo

and add this line

{user}   ALL = NOPASSWD: /usr/local/bin/

where {user} is your user name

save (in nano hit <CTRL> <o>), and make sure to save it as: /etc/sudoers

Step 4 Next, install xbindkeys

sudo apt-get install xbindkeys

when it's done, install xbindkeys-config, the GUI for xbindkeys

sudo apt-get install xbindkeys-config

once each is installed, start both applications:




edit your file to the shortcut key you want. For example, to be able to switch the touchpad on/off by <Ctrl><F5>, fill in the following, under Edit:

Name: Touchpad On/Off Key: Control + F5 | m:0x4 + c:71 Action: /usr/local/bin/

then click apply & save & exit

Now that that is done, restart xbindkeys:


You may need to restart X.

Remember that each time you restart X, you will need to run xbindkeys again in order for the shortcut to work.

SynapticsTouchpadHowTo (last edited 2008-08-06 17:00:08 by localhost)