Differences between revisions 7 and 9 (spanning 2 versions)
Revision 7 as of 2005-08-14 20:59:26
Size: 3000
Editor: ca-studio-bsr1o-251
Comment: login dialog is no longer ugly (thanks, Oliver!)
Revision 9 as of 2005-09-20 14:18:06
Size: 2830
Editor: gordian
Comment: Add link to NAT
Deletions are marked like this. Additions are marked like this.
Line 32: Line 32:
   1. Replace `/etc/dhcp3/dhcpd.conf` with the following contents, or adapt to your needs: {{{
subnet netmask {
  option domain-name-servers;
  option subnet-mask;
  filename "/ltsp/pxelinux.0";
  option root-path "/opt/ltsp/i386";
   1. If necessary, customize `/etc/ltsp/dhcpd.conf` (by default it's configured for a server at serving PXE clients)
Line 54: Line 45:

=== Extras ===

 1. ["ThinkClientHowtoNAT"]

Thin Client How-To

NOTE: This software is currently in a pre-alpha state. This means that you probably won't be happy with it unless you enjoy helping to track down bugs. If you're looking for something production-ready, head over to the [ LTSP] site. There is a manual on this wiki - see ["LTSPHowTo"].


You will need:

  • An Ubuntu "breezy" system to be the server (the current development branch, to be released in October 2005)
  • At least one PXE-bootable system to be a client
  • A bunch of disk space
  • A fast network connection, or a local Breezy mirror, or some patience
  • A DHCP server which is capable of supporting PXE clients, or a separate network segment where you can run a dedicated DHCP server
  • Command-line familiarity
  • A sense of adventure
  • A burning desire to send feedback to [ ubuntu-devel]

Getting Started

  1. Set up the DHCP server
    • If you have an existing DHCP server which can support PXE clients:
      • Configure it to pass a boot filename of /ltsp/pxelinux.0 and a root path of /opt/ltsp/i386

      • For ISC DHCPD, use the following options:

        filename "/ltsp/pxelinux.0";
        option root-path "/opt/ltsp/i386";
      • Install ltsp-server on the server: {{{sudo apt-get install ltsp-server


  • If you want to run a dedicated DHCP server on the thin client server:
    1. Install ltsp-server-standalone on the server: {{{sudo apt-get install ltsp-server-standalone


  1. If necessary, customize /etc/ltsp/dhcpd.conf (by default it's configured for a server at serving PXE clients)

  1. Build the thin client runtime environment: {{{sudo ltsp-build-client


  • This script is hardcoded to use a particular Ubuntu mirror, so you may wish to edit it if you have a nearby mirror
  1. Check /opt/ltsp/i386/etc/ssh/ssh_known_hosts and ensure that your host key is associated with your host's IP address. Depending on your /etc/hosts configuration, this may not always be correct automatically (yet). If it looks like this:

    servername ssh-rsa AAAAB3NzaC1yc2EAAAABI...

    then add the IP address like this:

    servername, ssh-rsa AAAAB3NzaC1yc2EAAAABI...
  2. Optionally, create /opt/ltsp/i386/etc/lts.conf. If you don't create one, reasonable defaults and auto-detected values will be used.

  3. PXE boot the client and see what happens. If all goes well, you should see a graphical login dialog.
  4. Log in, with any user authorized to login remotely via ssh, and see what happens. If all goes well, you should get a working desktop session on the server.
  5. Send mail to [ ubuntu-devel] with your findings


  1. ["ThinkClientHowtoNAT"]

ThinClientHowto (last edited 2008-08-06 16:14:39 by localhost)