|Deletions are marked like this.||Additions are marked like this.|
|Line 72:||Line 72:|
|Avahi's publish command sends packets out over ax.25 which is something we don't want. Below is a copy of a working /etc/avahi/avahi-daemon.conf that you can use. The lines "#jjs changed" are the ports turned off.||Avahi's publish command sends packets out over ax.25 which is something we don't want. Below is a copy of a working /etc/avahi/avahi-daemon.conf that you can use. The lines "#jjs changed" are the ports turned off.|
Joey, NV0N, has been working on finding the right configuration for USB Sound Modems like the Tigertronics SignalLink USB to be used for accessing packet BBSes. (APRS setup is a bit different in that it uses "kissattach" and "kissparms".)
Below is a work in progress under Natty. Feel free to edit this page if you have success.
This setup requires these packages:
- libax25 - library for hamradio applications
- ax25-apps - AX25 ham radio applications
- ax25-tools - AX-25 tools
- ax25-xtools - AX-25 tools (X versions) - optional
- ax25spyd - AX.25 traffic analyzer, dumper and spy daemon
- soundmodem - Sound Card Amateur Packet Radio Modems
- rigctl - Rig Control programs
- node - ham radio node (digipeter) application
- the IP address can be arbitrary for your testing (in fact, you can just leave it as is)
- replace the NV0N callsign with yours
- replace the hamlib configuration with yours. (123 is a Yaesu FT-897)
- I've added hamlib_params below which you may need to change or delete.
<?xml version="1.0"?> <modem> <configuration name="siglink"><channel name="Channel 0"><mod mode="afsk" bps="1200" f0="1200" f1="2200" diffenc="1" filter="df9ic/g3ruh" inlv="8" fec="3" tunelen="32" synclen="32"/><demod mode="afsk" bps="1200" f0="1200" f1="2200" diffdec="1" filter="df9ic/g3ruh"/><pkt mode="MKISS" ifname="sm0" hwaddr="NV0N-8" ip="188.8.131.52" netmask="255.255.255.0" broadcast="184.108.40.206" file="/dev/soundmodem0" unlink="1"/></channel><chaccess txdelay="300" slottime="100" ppersist="64" fulldup="0" txtail="30"/><audio type="alsa" device="plughw:2,0" halfdup="1" capturechannelmode="Mono"/><ptt file="/dev/ttyUSB0" hamlib_model="123" hamlib_params="serial_speed=4800,rts_state=OFF,dtr_state=OFF"/></configuration></modem>
The standard naming convention for soundmodems is sm0
# /etc/ax25/axports # # The format of this file is: # # name callsign speed paclen window description # sm0 NV0N-8 1200 255 2 145.090 MHz (1200 bps)
# /etc/ax25/ax25d.conf # # ax25d Configuration File. # # AX.25 Ports begin with a '['. # [NV0N-8 via sm0] parameters 1 10 * * * * * NOCALL * * * * * * L default 1 10 3 300 10 5 - root /usr/sbin/node node %d %s <netrom> parameters 1 10 * * * * * NOCALL * * * * * * L default * * * * * * 0 root /usr/sbin/node node
Avahi's publish command sends packets out over ax.25 which is something we don't want. Below is a copy of a working /etc/avahi/avahi-daemon.conf that you can use. The lines "#jjs changed" are the ports turned off.
# This file is part of avahi. # # avahi is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as # published by the Free Software Foundation; either version 2 of the # License, or (at your option) any later version. # # avahi is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public # License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with avahi; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. # See avahi-daemon.conf(5) for more information on this configuration # file! [server] #host-name=foo #domain-name=local #browse-domains=0pointer.de, zeroconf.org use-ipv4=yes use-ipv6=no #allow-interfaces=eth0 #deny-interfaces=eth1 #check-response-ttl=no #use-iff-running=no #enable-dbus=yes #disallow-other-stacks=no #allow-point-to-point=no #cache-entries-max=4096 #clients-max=4096 #objects-per-client-max=1024 #entries-per-entry-group-max=32 ratelimit-interval-usec=1000000 ratelimit-burst=1000 [wide-area] enable-wide-area=yes [publish] #jjs changed disable-publishing=yes #disable-user-service-publishing=no #add-service-cookie=no #jjs changed publish-addresses=no publish-hinfo=no publish-workstation=no publish-domain=no #publish-dns-servers=192.168.50.1, 192.168.50.2 #publish-resolv-conf-dns-servers=yes #publish-aaaa-on-ipv4=yes #publish-a-on-ipv6=no [reflector] #enable-reflector=no #reflect-ipv=no [rlimits] #rlimit-as= rlimit-core=0 rlimit-data=4194304 rlimit-fsize=0 rlimit-nofile=768 rlimit-stack=4194304 rlimit-nproc=3
and set your callsign and related fields.
This is the startup script (I call it packet.sh). Must be run as root/sudo. Advice is to run these manually the first few times until you get no errors. Keep in mind the route commands below need to match what you put into soundmodem.conf above.
# start ax25 with the soundmodem driver using the port # defined in /etc/ax25/axports /usr/sbin/soundmodem /etc/ax25/soundmodem.conf -R -M >/dev/null 2>/dev/null& sleep 1 # TNC Parameters txd, persist, slottime, txtail are done by # soundmodemconfig and stored in soundmodem.conf # this adds a route to our soundmodem /sbin/route add -host 220.127.116.11 dev sm0 # route to the rest of the netrom IP capable nodes /sbin/route add -net 18.104.22.168 netmask 255.255.255.0 gw 22.214.171.124 dev sm0 sleep 1 # listen for various incoming connects like PMS, node, etc. # (MUST first be configured in /etc/ax25/ax25d.conf) /usr/sbin/ax25d sleep 1 # listen for stations heard /usr/sbin/mheardd
At this point you should be at a command line and can run
axcall sm0 callsign
where callsign is your local BBS.