1. Driver Information

See http://doc.gwos.org/index.php/Rt2x00drivers
Driver Name:
Module Name:

2. WWW Reference

Enter links to other references on driver here
Home Page:http://doc.gwos.org/index.php/Rt2x00drivers
Secondary Help:http://ubuntuforums.org/showthread.php?t=474534

3. General Help

This driver works at least on Breezy and Dapper without using NdisWrapper. Be sure to have development tools and kernel headers installed before following the install instructions on the link above.

E.g. use Synaptic Package Manager to install build-essential and linux-headers-2.6.15-22-386 (or whichever is appropriate for your system)

3.1. WEP help

Enter anything related to getting wep to work

3.2. WPA help

If you what to rt2500 wifi device run with WPA all settings must be set in /etc/network/interfice and add thees lines:

auto ra0 iface ra0 inet dhcp pre-up iwconfig ra0 essid YOUR-SSID pre-up iwconfig ra0 mode managed pre-up iwpriv ra0 set Channel=7 pre-up iwpriv ra0 set AuthMode=WPAPSK pre-up iwpriv ra0 set EncrypType=TKIP pre-up iwpriv ra0 set WPAPSK="YOUR-WPA-PSK" pre-up iwpriv ra0 set TxRate=0

Just change settings to your wireless settings and restart computer!

4. Ubuntu Release Specific Info

Under the correct section enter anything that is specifc to the release only. See above general section if it is not release specific

4.1. Hoary 5.04

4.2. Breezy 5.10

4.3. Dapper 6.04

5. Compile Newer Driver

Section on compiling newer/latest driver

5.1. Specific Release Notes

Instructions should be generic and add any notes that are release specific in this section. Then create an anchor link where needed in instructions. Anchor example
```
  [[Anchor(name)]] - This would be the anchor you are linking to

  [#name {any words describing go here}] this is how you would enter the link in the instructions to link to the anchor
```
Here is an example, if you click on this link it will take you back to the top of page.