DebuggingKernelBoot

Differences between revisions 3 and 15 (spanning 12 versions)
Revision 3 as of 2008-06-06 16:26:53
Size: 2619
Editor: c-24-21-234-111
Comment:
Revision 15 as of 2012-02-07 12:31:40
Size: 3399
Editor: 177
Comment:
Deletions are marked like this. Additions are marked like this.
Line 6: Line 6:
 1. Press 'Escape' key at the 3 second pause by Grub bootloader.
 1. Then press 'e' (edit) on the buggy kernel entry, followed by 'e' again on the kernel line.
 1. Then remove the '''splash''' and '''quiet''' keywords and press 'b' to boot.
 1. Boot the machine.
 1. During the BIOS screen, press the shift key and hold it down. You should see the GRUB menu after the BIOS loads.
 1. Navigate to the kernel entry you want to boot, and press 'e'.
 1. Then remove the '''quiet''' and '''splash''' keywords (found in the line starting with linux)
 1. Starting with Natty (Ubuntu 11.04), also remove the parameter '''vt.handoff=7''', and on the line that reads '''set gfxpayload=$linux_gfx_mode''', replace with '''set gfxpayload=text'''
 1. Press 'Ctrl+x' to boot.
Line 12: Line 15:
Depending on the type of error messages you encounter, there are other boot options you could try. For example, if you notice ACPI errors, try booting with the '''acpi=off''' boot option. For a detailed summary of these options, refer to the [http://www.kernel.org/doc/Documentation/kernel-parameters.txt kernel parameters] document. Depending on the type of error messages you encounter, there are other boot options you could try. For example, if you notice ACPI errors, try booting with the '''acpi=off''' boot option. For a full description of these options, refer to the [[http://www.kernel.org/doc/Documentation/kernel-parameters.txt|kernel parameters]] document.
Line 15: Line 18:
Sometimes you may even be dropped into an initramfs shell. Obviously this indicates errors in the boot sequence, for example failing to find your root partition/filesystem. You are dropped into the initramfs shell in an effort to allow you to recover the system. Hopefully if you boot with the '''quiet''' and '''splash''' options removed you will notice error messages before being dropped into the shell which will help debug and direct you to a solution. Sometimes you may even be dropped into an initramfs shell. This indicates errors in the boot sequence, for example failing to find your root partition/filesystem. You are put into the initramfs shell in an effort to allow you to recover the system. Hopefully, if you boot with the '''quiet''' and '''splash''' options removed you will notice error messages before being dropped into the shell which will help debug and direct you to a solution.
Line 17: Line 20:
If you are dropped into an initramfs shell you may want to also try booting with the '''debug''' boot option. It should write a log to /tmp/initramfs.debug. You could also specify some arbitrary arguement (for example '''debug=vc''') to have the output written to the console. If you are dropped into an initramfs shell you may want to also try booting with the '''debug''' boot option. It should write a log to /tmp/initramfs.debug. You could also specify some arbitrary argument (for example '''debug=vc''') to have the output written to the console.
Line 19: Line 22:
There is another initramfs boot parameter which can purposely drop you into the initramfs shell during different stages of the initial boot sequence. The parameter is '''break=[option]''' where option can be: top, modules, premount, mount, bottom, or init. The default is premount if no options are specified. Additionally, being able to extract log files from the system would be helpful. Once dropped into an initramfs shell, you can type '''httpd'''. You should then be able to point a web browser to the IP address of the system and view the contents of /var/log .

There is another initramfs boot parameter which can purposely drop you into the initramfs shell during different stages of the initial boot sequence. The parameter is '''break=[option]''' where option can be: top, modules, premount, mount, bottom, or init. The default is premount if no options are specified.  More information about the break= parameters can be found in "/usr/share/initramfs-tools/init" on your Ubuntu system.

== Links ==
 * [[http://askubuntu.com/questions/32999/what-is-vt-handoff-7-parameter-in-grub-cfg|vt.handoff]] explained

Unfortunately it is sometimes the case that your system will fail to boot due to changes within the kernel. It is important that when submitting bug reports about these types of failures that you include the appropriate debugging information that can help the kernel team resolve the issue. The following wiki will document some useful tips to capture any relevant information.

Boot Options

When trying to capture relevant error messages that appear at boot it is often useful to boot with the quiet and splash options removed. This will hopefully allow you to see any messages that come across your screen. To edit boot option parameters, do the following:

  1. Boot the machine.
  2. During the BIOS screen, press the shift key and hold it down. You should see the GRUB menu after the BIOS loads.
  3. Navigate to the kernel entry you want to boot, and press 'e'.
  4. Then remove the quiet and splash keywords (found in the line starting with linux)

  5. Starting with Natty (Ubuntu 11.04), also remove the parameter vt.handoff=7, and on the line that reads set gfxpayload=$linux_gfx_mode, replace with set gfxpayload=text

  6. Press 'Ctrl+x' to boot.

It's best if you can attach a log file which may have captured any messages you see. If you are unable to capture a log file, a digital photo will work just as well. As a last resort you can even copy messages down by hand.

Depending on the type of error messages you encounter, there are other boot options you could try. For example, if you notice ACPI errors, try booting with the acpi=off boot option. For a full description of these options, refer to the kernel parameters document.

Initramfs

Sometimes you may even be dropped into an initramfs shell. This indicates errors in the boot sequence, for example failing to find your root partition/filesystem. You are put into the initramfs shell in an effort to allow you to recover the system. Hopefully, if you boot with the quiet and splash options removed you will notice error messages before being dropped into the shell which will help debug and direct you to a solution.

If you are dropped into an initramfs shell you may want to also try booting with the debug boot option. It should write a log to /tmp/initramfs.debug. You could also specify some arbitrary argument (for example debug=vc) to have the output written to the console.

Additionally, being able to extract log files from the system would be helpful. Once dropped into an initramfs shell, you can type httpd. You should then be able to point a web browser to the IP address of the system and view the contents of /var/log .

There is another initramfs boot parameter which can purposely drop you into the initramfs shell during different stages of the initial boot sequence. The parameter is break=[option] where option can be: top, modules, premount, mount, bottom, or init. The default is premount if no options are specified. More information about the break= parameters can be found in "/usr/share/initramfs-tools/init" on your Ubuntu system.


CategoryBugSquad CategoryDebugging

DebuggingKernelBoot (last edited 2019-11-02 17:01:33 by penalvch)