Ubuntu Wiki

   1 [    0.000000] Initializing cgroup subsys cpuset
   2 [    0.000000] Initializing cgroup subsys cpu
   3 [    0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Jul 24 22:46:06 UTC 2009 (Ubuntu 2.6.24-24.57-generic)
   4 [    0.000000] BIOS-provided physical RAM map:
   5 [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
   6 [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
   7 [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
   8 [    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
   9 [    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
  10 [    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
  11 [    0.000000] 127MB HIGHMEM available.
  12 [    0.000000] 896MB LOWMEM available.
  13 [    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
  14 [    0.000000] Zone PFN ranges:
  15 [    0.000000]   DMA             0 ->     4096
  16 [    0.000000]   Normal       4096 ->   229376
  17 [    0.000000]   HighMem    229376 ->   262128
  18 [    0.000000] Movable zone start PFN for each node
  19 [    0.000000] early_node_map[1] active PFN ranges
  20 [    0.000000]     0:        0 ->   262128
  21 [    0.000000] On node 0 totalpages: 262128
  22 [    0.000000]   DMA zone: 32 pages used for memmap
  23 [    0.000000]   DMA zone: 0 pages reserved
  24 [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  25 [    0.000000]   Normal zone: 1760 pages used for memmap
  26 [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  27 [    0.000000]   HighMem zone: 255 pages used for memmap
  28 [    0.000000]   HighMem zone: 32497 pages, LIFO batch:7
  29 [    0.000000]   Movable zone: 0 pages used for memmap
  30 [    0.000000] DMI 2.3 present.
  31 [    0.000000] ACPI: RSDP signature @ 0xC00F73A0 checksum 0
  32 [    0.000000] ACPI: RSDP 000F73A0, 0014 (r0 Nvidia)
  33 [    0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  34 [    0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  35 [    0.000000] ACPI: DSDT 3FFF30C0, 4620 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
  36 [    0.000000] ACPI: FACS 3FFF0000, 0040
  37 [    0.000000] ACPI: APIC 3FFF7700, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  38 [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
  39 [    0.000000] If you got timer trouble try acpi_use_timer_override
  40 [    0.000000] ACPI: PM-Timer IO Port: 0x4008
  41 [    0.000000] ACPI: Local APIC address 0xfee00000
  42 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  43 [    0.000000] Processor #0 6:8 APIC version 16
  44 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  45 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  46 [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  47 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  48 [    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
  49 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  50 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  51 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  52 [    0.000000] ACPI: IRQ9 used by override.
  53 [    0.000000] ACPI: IRQ14 used by override.
  54 [    0.000000] ACPI: IRQ15 used by override.
  55 [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  56 [    0.000000] Using ACPI (MADT) for SMP configuration information
  57 [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
  58 [    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  59 [    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
  60 [    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
  61 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260081
  62 [    0.000000] Kernel command line: root=UUID=6d9b6d9a-961b-4411-b545-a241f7cc68d4 ro quiet splash
  63 [    0.000000] mapped APIC to ffffb000 (fee00000)
  64 [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
  65 [    0.000000] Enabling fast FPU save and restore... done.
  66 [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  67 [    0.000000] Initializing CPU#0
  68 [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  69 [    0.000000] Detected 1670.557 MHz processor.
  70 [   14.274491] Console: colour VGA+ 80x25
  71 [   14.274495] console [tty0] enabled
  72 [   14.275145] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  73 [   14.276231] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  74 [   14.312486] Memory: 1027352k/1048512k available (2181k kernel code, 20464k reserved, 1006k data, 368k init, 131008k highmem)
  75 [   14.312497] virtual kernel memory layout:
  76 [   14.312498]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
  77 [   14.312500]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  78 [   14.312501]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  79 [   14.312502]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  80 [   14.312504]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
  81 [   14.312505]       .data : 0xc0321538 - 0xc041cdc4   (1006 kB)
  82 [   14.312507]       .text : 0xc0100000 - 0xc0321538   (2181 kB)
  83 [   14.312511] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  84 [   14.312569] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
  85 [   14.392468] Calibrating delay using timer specific routine.. 3343.80 BogoMIPS (lpj=6687608)
  86 [   14.392512] Security Framework initialized
  87 [   14.392521] SELinux:  Disabled at boot.
  88 [   14.392545] AppArmor: AppArmor initialized
  89 [   14.392551] Failure registering capabilities with primary security module.
  90 [   14.392564] Mount-cache hash table entries: 512
  91 [   14.392742] Initializing cgroup subsys ns
  92 [   14.392748] Initializing cgroup subsys cpuacct
  93 [   14.392760] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
  94 [   14.392773] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  95 [   14.392776] CPU: L2 Cache: 256K (64 bytes/line)
  96 [   14.392781] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
  97 [   14.392795] Compat vDSO mapped to ffffe000.
  98 [   14.392811] Checking 'hlt' instruction... OK.
  99 [   14.408742] SMP alternatives: switching to UP code
 100 [   14.410080] Freeing SMP alternatives: 11k freed
 101 [   14.410240] Early unpacking initramfs... done
 102 [   14.796372] ACPI: Core revision 20070126
 103 [   14.796471] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
 104 [   14.799877] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
 105 [   14.799898] Total of 1 processors activated (3343.80 BogoMIPS).
 106 [   14.800100] ENABLING IO-APIC IRQs
 107 [   14.800301] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
 108 [   14.947669] Brought up 1 CPUs
 109 [   14.947705] CPU0 attaching sched-domain:
 110 [   14.947709]  domain 0: span 01
 111 [   14.947711]   groups: 01
 112 [   14.947957] net_namespace: 64 bytes
 113 [   14.947965] Booting paravirtualized kernel on bare hardware
 114 [   14.948518] Time:  6:35:12  Date: 08/14/09
 115 [   14.948560] NET: Registered protocol family 16
 116 [   14.948826] EISA bus registered
 117 [   14.948856] ACPI: bus type pci registered
 118 [   14.983709] PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=2
 119 [   14.983713] PCI: Using configuration type 1
 120 [   14.983717] Setting up standard PCI resources
 121 [   14.989175] ACPI: EC: Look up EC in DSDT
 122 [   14.994881] ACPI: Interpreter enabled
 123 [   14.994884] ACPI: (supports S0 S1 S4 S5)
 124 [   14.994901] ACPI: Using IOAPIC for interrupt routing
 125 [   15.005130] ACPI: PCI Root Bridge [PCI0] (0000:00)
 126 [   15.005983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 127 [   15.006193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 128 [   15.006445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
 129 [   15.057279] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 130 [   15.057470] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 131 [   15.057657] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 132 [   15.057844] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
 133 [   15.058029] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 134 [   15.058218] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
 135 [   15.058405] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
 136 [   15.058598] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
 137 [   15.058785] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 138 [   15.058972] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
 139 [   15.059163] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 140 [   15.059355] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
 141 [   15.059552] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
 142 [   15.059743] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 143 [   15.059930] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 144 [   15.060117] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
 145 [   15.060280] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
 146 [   15.060426] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
 147 [   15.060571] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
 148 [   15.060730] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
 149 [   15.060876] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
 150 [   15.061087] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
 151 [   15.061296] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
 152 [   15.061504] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
 153 [   15.061711] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
 154 [   15.061917] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
 155 [   15.062124] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
 156 [   15.062272] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
 157 [   15.062477] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
 158 [   15.062683] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
 159 [   15.062889] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
 160 [   15.063096] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
 161 [   15.063282] Linux Plug and Play Support v0.97 (c) Adam Belay
 162 [   15.063328] pnp: PnP ACPI init
 163 [   15.063340] ACPI: bus type pnp registered
 164 [   15.068769] pnp: PnP ACPI: found 15 devices
 165 [   15.068773] ACPI: ACPI bus type pnp unregistered
 166 [   15.068778] PnPBIOS: Disabled by ACPI PNP
 167 [   15.069106] PCI: Using ACPI for IRQ routing
 168 [   15.069113] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
 169 [   15.111400] NET: Registered protocol family 8
 170 [   15.111403] NET: Registered protocol family 20
 171 [   15.111505] AppArmor: AppArmor Filesystem Enabled
 172 [   15.115345] Time: tsc clocksource has been installed.
 173 [   15.123380] system 00:00: ioport range 0x4000-0x407f has been reserved
 174 [   15.123384] system 00:00: ioport range 0x4080-0x40ff has been reserved
 175 [   15.123388] system 00:00: ioport range 0x4400-0x447f has been reserved
 176 [   15.123391] system 00:00: ioport range 0x4480-0x44ff has been reserved
 177 [   15.123394] system 00:00: ioport range 0x4200-0x427f has been reserved
 178 [   15.123398] system 00:00: ioport range 0x4280-0x42ff has been reserved
 179 [   15.123407] system 00:01: ioport range 0x5000-0x503f has been reserved
 180 [   15.123410] system 00:01: ioport range 0x5040-0x507f has been reserved
 181 [   15.123420] system 00:02: iomem range 0xd1800-0xd3fff has been reserved
 182 [   15.123423] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
 183 [   15.123427] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
 184 [   15.123430] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
 185 [   15.123433] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved
 186 [   15.123437] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
 187 [   15.123440] system 00:02: iomem range 0x0-0x9ffff could not be reserved
 188 [   15.123443] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved
 189 [   15.123447] system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
 190 [   15.123450] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
 191 [   15.123459] system 00:04: ioport range 0xb78-0xb7b has been reserved
 192 [   15.123462] system 00:04: ioport range 0xf78-0xf7b has been reserved
 193 [   15.123465] system 00:04: ioport range 0xa78-0xa7b has been reserved
 194 [   15.123468] system 00:04: ioport range 0xe78-0xe7b has been reserved
 195 [   15.123471] system 00:04: ioport range 0xbbc-0xbbf has been reserved
 196 [   15.123474] system 00:04: ioport range 0xfbc-0xfbf has been reserved
 197 [   15.123477] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
 198 [   15.123480] system 00:04: ioport range 0x294-0x297 has been reserved
 199 [   15.153992] PCI: Bridge: 0000:00:08.0
 200 [   15.153995]   IO window: disabled.
 201 [   15.154000]   MEM window: disabled.
 202 [   15.154004]   PREFETCH window: disabled.
 203 [   15.154012] PCI: Bridge: 0000:00:1e.0
 204 [   15.154014]   IO window: disabled.
 205 [   15.154018]   MEM window: e8000000-e9ffffff
 206 [   15.154022]   PREFETCH window: e4000000-e7ffffff
 207 [   15.154035] PCI: Setting latency timer of device 0000:00:08.0 to 64
 208 [   15.154054] NET: Registered protocol family 2
 209 [   15.191336] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
 210 [   15.191761] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
 211 [   15.193503] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
 212 [   15.194354] TCP: Hash tables configured (established 131072 bind 65536)
 213 [   15.194359] TCP reno registered
 214 [   15.203398] checking if image is initramfs... it is
 215 [   15.654515] Switched to high resolution mode on CPU 0
 216 [   15.932442] Freeing initrd memory: 7320k freed
 217 [   15.933322] audit: initializing netlink socket (disabled)
 218 [   15.933340] audit(1250231712.516:1): initialized
 219 [   15.933529] highmem bounce pool size: 64 pages
 220 [   15.935893] VFS: Disk quotas dquot_6.5.1
 221 [   15.935988] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 222 [   15.936167] io scheduler noop registered
 223 [   15.936170] io scheduler anticipatory registered
 224 [   15.936173] io scheduler deadline registered
 225 [   15.936185] io scheduler cfq registered (default)
 226 [   15.936349] Boot video device is 0000:02:00.0
 227 [   15.936744] isapnp: Scanning for PnP cards...
 228 [   16.290752] isapnp: No Plug & Play device found
 229 [   16.327177] Real Time Clock Driver v1.12ac
 230 [   16.327322] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
 231 [   16.327473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
 232 [   16.327645] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
 233 [   16.328397] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
 234 [   16.328848] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
 235 [   16.330324] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
 236 [   16.330417] input: Macintosh mouse button emulation as /devices/virtual/input/input0
 237 [   16.330554] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
 238 [   16.333011] serio: i8042 KBD port at 0x60,0x64 irq 1
 239 [   16.333017] serio: i8042 AUX port at 0x60,0x64 irq 12
 240 [   16.345431] mice: PS/2 mouse device common for all mice
 241 [   16.345586] EISA: Probing bus 0 at eisa.0
 242 [   16.345611] Cannot allocate resource for EISA slot 4
 243 [   16.345614] Cannot allocate resource for EISA slot 5
 244 [   16.345631] EISA: Detected 0 cards.
 245 [   16.345636] cpuidle: using governor ladder
 246 [   16.345638] cpuidle: using governor menu
 247 [   16.345809] NET: Registered protocol family 1
 248 [   16.345846] Using IPI No-Shortcut mode
 249 [   16.345889] registered taskstats version 1
 250 [   16.345998]   Magic number: 5:726:569
 251 [   16.346101]   hash matches device ptyb1
 252 [   16.346203]   hash matches device PNP0C0F:16
 253 [   16.346222] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
 254 [   16.346224] EDD information not available.
 255 [   16.346682] Freeing unused kernel memory: 368k freed
 256 [   16.346721] Write protecting the kernel read-only data: 802k
 257 [   16.377299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
 258 [   17.646535] fuse init (API version 7.9)
 259 [   17.666565] ACPI: Fan [FAN] (on)
 260 [   17.676615] ACPI: Thermal Zone [THRM] (39 C)
 261 [   18.701608] usbcore: registered new interface driver usbfs
 262 [   18.701640] usbcore: registered new interface driver hub
 263 [   18.713580] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
 264 [   18.713989] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
 265 [   18.713998] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
 266 [   18.714007] PCI: Setting latency timer of device 0000:00:04.0 to 64
 267 [   18.729914] usbcore: registered new device driver usb
 268 [   18.774962] SCSI subsystem initialized
 269 [   18.785400] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 270 [   18.818158] libata version 3.00 loaded.
 271 [   18.972962] FDC 0 is a post-1991 82077
 272 [   19.233107] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 00:0c:76:53:df:bd
 273 [   19.233115] forcedeth 0000:00:04.0: timirq lnktim desc-v1
 274 [   19.233695] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
 275 [   19.233705] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17
 276 [   19.233723] PCI: Setting latency timer of device 0000:00:02.0 to 64
 277 [   19.233727] ohci_hcd 0000:00:02.0: OHCI Host Controller
 278 [   19.234151] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
 279 [   19.234178] ohci_hcd 0000:00:02.0: irq 17, io mem 0xea004000
 280 [   19.290686] usb usb1: configuration #1 chosen from 1 choice
 281 [   19.290721] hub 1-0:1.0: USB hub found
 282 [   19.290732] hub 1-0:1.0: 3 ports detected
 283 [   19.392886] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
 284 [   19.392899] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
 285 [   19.392917] PCI: Setting latency timer of device 0000:00:02.1 to 64
 286 [   19.392922] ohci_hcd 0000:00:02.1: OHCI Host Controller
 287 [   19.392961] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
 288 [   19.392983] ohci_hcd 0000:00:02.1: irq 18, io mem 0xea005000
 289 [   19.450399] usb usb2: configuration #1 chosen from 1 choice
 290 [   19.450433] hub 2-0:1.0: USB hub found
 291 [   19.450444] hub 2-0:1.0: 3 ports detected
 292 [   19.552961] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
 293 [   19.552969] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16
 294 [   19.552984] PCI: Setting latency timer of device 0000:00:02.2 to 64
 295 [   19.552988] ehci_hcd 0000:00:02.2: EHCI Host Controller
 296 [   19.553027] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
 297 [   19.553069] ehci_hcd 0000:00:02.2: debug port 1
 298 [   19.553075] PCI: cache line size of 64 is not supported by device 0000:00:02.2
 299 [   19.553090] ehci_hcd 0000:00:02.2: irq 16, io mem 0xea000000
 300 [   19.695862] usb 1-1: new full speed USB device using ohci_hcd and address 2
 301 [   19.707834] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 302 [   19.708001] usb usb3: configuration #1 chosen from 1 choice
 303 [   19.708032] hub 3-0:1.0: USB hub found
 304 [   19.708042] hub 3-0:1.0: 6 ports detected
 305 [   19.812202] pata_amd 0000:00:09.0: version 0.3.10
 306 [   19.812300] PCI: Setting latency timer of device 0000:00:09.0 to 64
 307 [   19.813592] scsi0 : pata_amd
 308 [   19.814487] scsi1 : pata_amd
 309 [   19.815393] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
 310 [   19.815397] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
 311 [   19.983852] ata1.00: ATA-6: WDC WD800BB-00FJA0, 13.03G13, max UDMA/100
 312 [   19.983859] ata1.00: 156301488 sectors, multi 16: LBA 
 313 [   19.996305] ata1.01: ATA-7: WDC WD1600AABB-56PUA0, 00.07H00, max UDMA/100
 314 [   19.996309] ata1.01: 312581808 sectors, multi 16: LBA48 
 315 [   20.003710] ata1.00: configured for UDMA/100
 316 [   20.019895] ata1.01: configured for UDMA/100
 317 [   20.131119] usb 3-1: new high speed USB device using ehci_hcd and address 2
 318 [   20.263421] usb 3-1: configuration #1 chosen from 1 choice
 319 [   20.263844] hub 3-1:1.0: USB hub found
 320 [   20.264015] hub 3-1:1.0: 4 ports detected
 321 [   20.339212] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H20N, 1.01, max UDMA/33
 322 [   20.510869] ata2.00: configured for UDMA/33
 323 [   20.511040] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-00FJ 13.0 PQ: 0 ANSI: 5
 324 [   20.511596] scsi 0:0:1:0: Direct-Access     ATA      WDC WD1600AABB-5 00.0 PQ: 0 ANSI: 5
 325 [   20.513160] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20N 1.01 PQ: 0 ANSI: 5
 326 [   20.532894] Driver 'sd' needs updating - please use bus_type methods
 327 [   20.533016] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
 328 [   20.533034] sd 0:0:0:0: [sda] Write Protect is off
 329 [   20.533038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
 330 [   20.533059] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 331 [   20.533121] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
 332 [   20.533134] sd 0:0:0:0: [sda] Write Protect is off
 333 [   20.533137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
 334 [   20.533156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 335 [   20.533161]  sda: sda1 sda2
 336 [   20.538637] sd 0:0:0:0: [sda] Attached SCSI disk
 337 [   20.538747] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
 338 [   20.538764] sd 0:0:1:0: [sdb] Write Protect is off
 339 [   20.538768] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
 340 [   20.538788] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 341 [   20.538847] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
 342 [   20.538859] sd 0:0:1:0: [sdb] Write Protect is off
 343 [   20.538863] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
 344 [   20.538881] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 345 [   20.538885]  sdb:<4>Driver 'sr' needs updating - please use bus_type methods
 346 [   20.544250]  sdb1 < sdb5 sdb6 sdb7 > sdb2 sdb3
 347 [   20.589897] sd 0:0:1:0: [sdb] Attached SCSI disk
 348 [   20.603846] sd 0:0:0:0: Attached scsi generic sg0 type 0
 349 [   20.603872] sd 0:0:1:0: Attached scsi generic sg1 type 0
 350 [   20.603894] sr 1:0:0:0: Attached scsi generic sg2 type 5
 351 [   20.608421] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
 352 [   20.608430] Uniform CD-ROM driver Revision: 3.20
 353 [   20.608506] sr 1:0:0:0: Attached scsi CD-ROM sr0
 354 [   21.486492] Attempting manual resume
 355 [   21.486498] swsusp: Resume From Partition 8:18
 356 [   21.486500] PM: Checking swsusp image.
 357 [   21.486763] PM: Resume from disk failed.
 358 [   21.511210] kjournald starting.  Commit interval 5 seconds
 359 [   21.511235] EXT3-fs: mounted filesystem with ordered data mode.
 360 [   30.422437] input: PC Speaker as /devices/platform/pcspkr/input/input2
 361 [   30.824517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
 362 [   30.885551] Linux agpgart interface v0.102
 363 [   31.089909] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
 364 [   31.157138] agpgart: Detected NVIDIA nForce2 chipset
 365 [   31.163918] agpgart: AGP aperture is 64M @ 0xe0000000
 366 [   31.190336] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
 367 [   31.190359] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
 368 [   31.236025] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
 369 [   31.262222] parport_pc 00:0c: reported by Plug and Play ACPI
 370 [   31.262286] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
 371 [   31.337170] input: Power Button (FF) as /devices/virtual/input/input4
 372 [   31.352735] ACPI: Power Button (FF) [PWRF]
 373 [   31.352952] input: Power Button (CM) as /devices/virtual/input/input5
 374 [   31.368803] ACPI: Power Button (CM) [PWRB]
 375 [   33.282166] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
 376 [   33.282174] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
 377 [   33.282207] PCI: Setting latency timer of device 0000:00:06.0 to 64
 378 [   33.605019] intel8x0_measure_ac97_clock: measured 52742 usecs
 379 [   33.605025] intel8x0: clocking to 47467
 380 [   34.424847] nvidia: module license 'NVIDIA' taints kernel.
 381 [   34.809931] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
 382 [   34.809944] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
 383 [   34.810469] NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.05  Tue Jan 22 19:36:58 PST 2008
 384 [   36.817988] lp0: using parport0 (interrupt-driven).
 385 [   36.850161] usbcore: registered new interface driver libusual
 386 [   36.856635] Initializing USB Mass Storage driver...
 387 [   36.856695] usbcore: registered new interface driver usb-storage
 388 [   36.856700] USB Mass Storage support registered.
 389 [   36.933568] Adding 2000052k swap on /dev/sdb2.  Priority:-1 extents:1 across:2000052k
 390 [   37.509168] EXT3 FS on sdb3, internal journal
 391 [   38.806802] ip_tables: (C) 2000-2006 Netfilter Core Team
 392 [   39.291158] No dock devices found.
 393 [   40.724760] NET: Registered protocol family 10
 394 [   40.725406] lo: Disabled Privacy Extensions
 395 [   40.860019] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
 396 [   40.860026] apm: overridden by ACPI.
 397 [   41.009352] ppdev: user-space parallel port driver
 398 [   41.232172] audit(1250211938.562:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5030 profile="/usr/sbin/cupsd" namespace="default"
 399 [   42.463828] Bluetooth: Core ver 2.11
 400 [   42.464798] NET: Registered protocol family 31
 401 [   42.464805] Bluetooth: HCI device and connection manager initialized
 402 [   42.464811] Bluetooth: HCI socket layer initialized
 403 [   42.502482] Bluetooth: L2CAP ver 2.9
 404 [   42.502490] Bluetooth: L2CAP socket layer initialized
 405 [   42.698593] Bluetooth: RFCOMM socket layer initialized
 406 [   42.698623] Bluetooth: RFCOMM TTY layer initialized
 407 [   42.698626] Bluetooth: RFCOMM ver 1.8
 408 [   44.694652] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
 409 [   44.695103] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
 410 [   44.695364] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
 411 [   46.566748] NET: Registered protocol family 17
 412 [   73.080230] eth0: no IPv6 routers present