Automated Server Installs Config File Reference

Overall format

The autoinstall file is YAML. At top level it must be a mapping containing the keys described in this document. Unrecognized keys are ignored.

Schema

Autoinstall configs are validated against a JSON schema before they are used.

Command lists

Several config keys are lists of commands to be executed. Each command can be a string (in which case it is executed via "sh -c") or a list, in which case it is executed directly. Any command exiting with a non-zero return code is considered an error and aborts the install (except for error-commands, where it is ignored).

Top-level keys

version

type: integer
default: no default

A future-proofing config file version field. Currently this must be "1".

interactive-sections

type: list of strings
default: []

A list of config keys to still show in the UI. So for example:

version: 1
interactive-sections:
 - network
identity:
 username: ubuntu
 password: $crypted_pass

Would stop on the network screen and allow the user to change the defaults. If a value is provided for an interactive section it is used as the default.

You can use the special section name of "*" to indicate that the installer should ask all the usual questions -- in this case, the autoinstall.yaml file is not really an "autoinstall" file at all, instead just a way to change the defaults in the UI.

Not all config keys correspond to screens in the UI. This documentation indicates if a given section can be interactive or not.

If there are any interactive sections at all, the reporting key is ignored.

early-commands

type: command list
default: no commands
can be interactive: no

A list of shell commands to invoke as soon as the installer starts, in particular before probing for block and network devices. The autoinstall config is available at /autoinstall.yaml (irrespective of how it was provided) and the file will be re-read after the early_commands have run to allow them to alter the config if necessary.

locale

type: string
default: en_US.UTF-8
can be interactive: yes, always interactive if any section is

The locale to configure for the installed system.

refresh-installer

type: mapping
default: see below
can be interactive: yes

Controls whether the installer updates to a new version available in the given channel before continuing.

The mapping contains keys:

update

type: boolean
default: no

Whether to update or not.

channel

type: string
default: "stable/ubuntu-$REL"

The channel to check for updates.

keyboard

type: mapping, see below
default: US English keyboard
can be interactive: yes

The layout of any attached keyboard. Often systems being automatically installed will not have a keyboard at all in which case the value used here does not matter.

The mapping's keys correspond to settings in the /etc/default/keyboard configuration file. See its manual page for more details.

The mapping contains keys:

layout

type: string
default: "us"

Corresponds to the XKBLAYOUT setting.

variant

type: string
default: ""

Corresponds to the XKBVARIANT setting.

toggle

type: string or null
default: null

Corresponds to the value of grp: option from the XKBOPTIONS setting. Acceptable values are (but note that the installer does not validate these): caps_toggle, toggle, rctrl_toggle, rshift_toggle, rwin_toggle, menu_toggle, alt_shift_toggle, ctrl_shift_toggle, ctrl_alt_toggle, alt_caps_toggle, lctrl_lshift_toggle, lalt_toggle, lctrl_toggle, lshift_toggle, lwin_toggle, sclk_toggle

network

type: netplan-format mapping, see below
default: DHCP on interfaces named eth* or en*
can be interactive: yes

netplan formatted network configuration. This will be applied during installation as well as in the installed system. The default is to interpret the config for the install media, which runs DHCPv4 on any interface with a name matching "eth*" or "en*" but then disables any interface that does not receive an address.

proxy

type: URL or null
default: no proxy
can be interactive: yes

The proxy to configure both during installation and for apt and for snapd in the target system.

apt

type: mapping
default: see below
can be interactive: yes

Apt configuration, used both during the install and once booted into the target system.

This uses the same format as curtin which is documented at https://curtin.readthedocs.io/en/latest/topics/apt_source.html, with one extension: the geoip key controls whether a geoip lookup is done.

The default is:

apt:
    preserve_sources_list: false
    primary:
        - arches: [i386, amd64]
          uri: "http://archive.ubuntu.com/ubuntu"
        - arches: [default]
          uri: "http://ports.ubuntu.com/ubuntu-ports"
    geoip: true

If geoip is true and the mirror to be used is the default, a request is made to https://geoip.ubuntu.com/lookup and the mirror uri to be used changed to be http://CC.archive.ubuntu.com/ubuntu where CC is the country code returned by the lookup (or similar for ports). If this section is not interactive, the request is timed out after 10 seconds.

Any supplied config is merged with the default rather than replacing it.

If you just want to set a mirror, use a config like this:

apt:
    primary:
        - arches: [default]
        - uri: YOUR_MIRROR_GOES_HERE

To add a ppa:

apt:
    sources:
        curtin-ppa:
            source: ppa:curtin-dev/test-archive

storage

type: mapping, see below
default: use "lvm" layout in a single disk system, no default in a multiple disk system
can be interactive: yes

Storage configuration is a complex topic and the description of the desired configuration in the autoinstall file can necessarily also be complex. The installer supports "layouts", simple ways of expressing common configurations.

Supported layouts

The two supported layouts at the time of writing are "lvm" and "direct".

storage:
  layout:
    name: lvm
storage:
  layout:
    name: direct

By default these will install to the largest disk in a system, but you can supply a match spec (see below) to indicate which disk to use:

storage:
  layout:
    name: lvm
    match:
      serial: CT*
storage:
  layout:
    name: disk
    match:
      ssd: yes

(you can just say "match: {}" to match an arbitrary disk)

The default is to use the lvm layout.

action-based config

For full flexibility, the installer allows storage configuration to be done using a syntax which is a superset of that supported by curtin, described at https://curtin.readthedocs.io/en/latest/topics/storage.html. As well as putting the list of actions under the 'config' key, the swap and grub curtin config items can be put here -- although curtin expects paths in install_devices and the server installer expects action ids. So a storage section might look like:

storage:
    grub:
        install_devices:
           - disk0
    swap:
        size: 0
    config:
        - type: disk
          id: disk0
          serial: ADATA_SX8200PNP_XXXXXXXXXXX
        - type: partition
          ...

The extensions to the curtin syntax are mostly around disk selection. Curtin supported identifying disks by serial (e.g. Crucial_CT512MX100SSD1_14250C57FECE) or by path (e.g. /dev/sdc) and the server installer supports this as well. The installer additionally supports a match spec on a disk action that supports more flexible matching.

The actions in the storage config are processed in the order they are in the autoinstall file. Any disk action is assigned a matching disk -- chosen arbitrarily from the set of unassigned disks if there is more than one, and causing the installation to fail if there is no unassigned matching disk.

A match spec supports the following keys:

• model: foo: matches a disk where ID_VENDOR=foo in udev, supporting globbing

• path: foo: matches a disk where DEVPATH=foo in udev, supporting globbing (the globbing support distinguishes this from specifying path: foo directly in the disk action)

• serial: foo: matches a disk where ID_SERIAL=foo in udev, supporting globbing (the globbing support distinguishes this from specifying serial: foo directly in the disk action)

• ssd: yes|no: matches a disk that is or is not an SSD (vs a rotating drive)

• size: largest: take the largest disk rather than an arbitrary one if there are multiple matches

So for example, to match an arbitrary disk it is simply:

 - type: disk
   id: disk0

To match the largest ssd:

 - type: disk
   id: big-fast-disk
   match:
     ssd: yes
     size: largest

To match a Seagate drive:

 - type: disk
   id: data-disk
   match:
     model: Seagate

autoinstall-editor supports creating and editing configs with arbitrary disk match specs.

Another extension to curtin syntax is how the size of partitions or LVM logical volumes are specified. Curtin just takes a size for this, but the server installer allows sizes to be specified as percentages of the containing device. Also, a negative size can be used for the final partition to indicate that the partition should use all the remaining space.

 - type: partition
   id: boot-partition
   device: root-disk
   size: 10%
 - type: partition
   id: root-partition
   size: 20G
 - type: partition
   id: data-partition
   device: root-disk
   size: -1

identity

type: mapping, see below
default: no default
can be interactive: yes

Configure the initial user for the system. This is the only config key that must be present (unless the user-data section is present, in which case it is optional).

A mapping that can contain keys, all of which take string values:

realname

The real name for the user. This field is optional.

username

The user name to create.

hostname

The hostname for the system.

password

The password for the new user, crypted. This is required for use with sudo, even if SSH access is configured.

ssh

type: mapping, see below
default: see below
can be interactive: yes

Configure ssh for the installed system. A mapping that can contain keys:

install-server

type: boolean
default: false

Whether to install OpenSSH server in the target system.

authorized-keys

type: list of strings
default: []

A list of SSH public keys to install in the initial user's account.

allow-pw

type: boolean
default: true if authorized_keys is empty, false otherwise

snaps

type: list
default: install no extra snaps
can be interactive: yes

A list of snaps to install. Each snap is represented as a mapping with required name and optional channel (defaulting to stable) and classic (defaulting to false) keys. For example:

snaps:
    - name: etcd
      channel: edge
      classic: false

debconf-selections

type: string
default: no config
can be interactive: no

The installer will update the target with debconf set-selection values. Users will need to be familiar with the package debconf options.

packages

type: list
default: no packages
can be interactive: no

A list of packages to install into the target system. More precisely, a list of strings to pass to "apt-get install", so this includes things like task selection (dns-server^) and installing particular versions of a package (my-package=1-1).

late-commands

type: command list
default: no commands
can be interactive: no

Shell commands to run after the install has completed successfully and any updates and packages installed, just before the system reboots. They are run in the installer environment with the installed system mounted at /target. You can run curtin in-target -- $shell_command to run in the target system (similar to how plain in-target can be used in d-i preseed/late_command).

error-commands

type: command list
default: no commands
can be interactive: no

Shell commands to run after the install has failed. They are run in the installer environment, and the target system (or as much of it as the installer managed to configure) will be mounted at /target. Logs will be available at /var/log/installer in the live session.

reporting

type: mapping
default: type: print which causes output on tty1 and any configured serial consoles
can be interactive: no

The installer supports reporting progress to a variety of destinations. Note that this section is ignored if there are any interactive sections; it only applies to fully automated installs.

The config, and indeed the implementation, is 90% the same as that used by curtin.

Each key in the reporting mapping in the config defines a destination, where the type sub-key is one of:

• print: print progress information on tty1 and any configured serial console. There is no other configuration.

• rsyslog: report progress via rsyslog. The destination key specifies where to send output.

• webhook: report progress via POSTing JSON reports to a URL. Accepts the same configuration as curtin.

• none: do not report progress. Only useful to inhibit the default output.

Examples:

The default configuration is:

reporting:
 builtin:
  type: print

Report to rsyslog:

reporting:
 central:
  type: rsyslog
  destination: @192.168.0.1

Suppress the default output:

reporting:
 builtin:
  type: none

Report to a curtin-style webhook:

reporting:
 hook:
  type: webhook
  endpoint: http://example.com/endpoint/path
  consumer_key: "ck_foo"
  consumer_secret: "cs_foo"
  token_key: "tk_foo"
  token_secret: "tk_secret"
  level: INFO

user-data

type: mapping
default: {}
can be interactive: no

Provide cloud-init user-data which will be merged with the user-data the installer produces. If you supply this, you don't need to supply an identity section (but then it's your responsibility to make sure that you can log into the installed system!).