HardwareSupportComponentsVideoCardsAti
Summary
Make |
Model |
Chipset/Driver |
Auto-detected? |
2D |
3D |
Comments |
Release |
ATI |
Mobility FireGL T2 |
|
Yes |
Yes |
No |
3D requires xorg-driver-fglrx, see BinaryDriverHowto. |
v5.10 (Breezy) |
ATI |
Mobility FireGL 9000 |
RV250lf |
Yes |
Yes |
Yes |
|
|
ATI |
Onboard IGP 340M |
|
Yes |
Yes |
No |
BinaryDriverHowto is not sufficient for 3D: hopefully will work in v5.04 (Hoary) under xorg. |
|
ATI |
Radeon Mobility M7 |
|
Yes |
Yes |
Yes |
|
|
ATI |
Radeon Mobility U1 (IGP 320M) |
|
Yes |
Yes |
No |
|
v5.10 (Breezy) |
ATI |
Radeon Mobility 9200 |
RV250lf |
Yes |
Yes |
|
|
|
ATI |
Radeon Mobility 9700 (M11) |
|
Yes (but as M10) |
Yes |
Yes |
3D needs fglrx see BinaryDriverHowto. Fglrx is compulsory for fixing some video problems. Package fglrx-control is recommended. TV-out works well if TV connected before starting X. |
v5.10 (Breezy) |
ATI |
Radeon 7000 VE (RV100 QY) |
ATI |
Yes |
Yes |
Yes |
You need to use the 'vesa' driver to get X working via TV out. |
v5.04 (Hoary) |
ATI |
Radeon 8500 (and above!) |
|
Yes |
Yes |
Yes |
GRUB hangs if TV is connected(!) |
|
ATI |
Radeon 9000 |
RV250 |
Yes |
Yes |
Yes |
3D may hard-freeze X-server unless AGP mode is set correctly in Xorg.conf. If you have this problem, try adding Option "AGPMode" "4" to the device section of Xorg.conf |
|
ATI |
Radeon 9100 IGP |
vesa |
Yes |
Yes |
No |
ATI does not support 3D for this model. Open source driver crashes when 3d starts. Use the Vesa driver for now. 3d support using open source is close! |
|
ATI |
Radeon 9200 |
RV280 |
Yes |
Yes |
Yes |
Tv-out also works (using ATI control panel) |
v5.10 (Breezy) |
ATI |
Radeon 9200 PRO |
RV280 |
Yes |
Yes |
|
Change Driver "ati" to "radeon" -> OK |
|
ATI |
Radeon 9250 PRO |
RV280 |
Yes |
Yes |
Yes |
Works in Breezy, locks up when starting X on Dapper (at least the 256mb model). Malone bug [https://launchpad.net/distros/ubuntu/+source/linux-meta/+bug/31527 31527]. |
v5.10 (Breezy) & v6.06 (Dapper) |
ATI |
Radeon 9500 PRO |
|
Yes |
Yes |
Yes |
|
|
ATI |
Radeon 9600 |
|
Yes |
Yes |
Yes |
3D requires xorg-driver-fglrx, see BinaryDriverHowto |
v5.10 (Breezy) |
ATI |
Radeon 9600XT (256Mb) |
|
Yes |
Yes |
Yes |
3D needs -fglrx, reconfiguring in Breezy required X to be stopped, see DualHeadOnApplePowerMacG5 |
v5.04 (Hoary) & v5.10 (Breezy) |
ATI |
Radeon 9700 |
|
Yes |
Yes |
Yes |
3D requires xorg-driver-fglrx, see BinaryDriverHowto. |
v5.10 (Breezy) |
ATI |
Radeon 9800 PRO |
|
Yes |
Yes |
Yes |
|
|
ATI |
Radeon AIW 9800 PRO |
RV350 |
Yes |
Yes |
Yes |
All In Wonder 9800 Pro was detected as a Radeon 9800 PRO, 3D requires Fglrx, see BinaryDriverHowto. |
|
ATI |
Radeon X700 PRO |
|
Yes |
Yes |
Depends |
if X server does not start with driver "Ati" (first boot) change it to "vesa" and then follow the instructions on BinaryDriverHowto. On some manufacturer's cards (I think Abit, a red card) openGL doesn't work, gdb says crash happens in the driver. |
|
ATI |
Rage All-In-Wonder |
ATI |
Yes |
Yes |
Yes |
Cursor become black when 3D rendering is active. |
v5.04 (Hoary) |
ATI |
Rage Mobility P/M AGP 2x |
|
Yes |
Yes |
Yes |
TV-Out doesn't work! |
|
ATI |
Rage 128 PRO TMDS |
ATI |
Yes |
Yes |
Yes |
Cursor become black when 3D rendering is active. TV-In not supported. |
v5.04 (Hoary) |