Ubuntu Wiki

Introduction

This document describes the steps to setup a chroot jail for building Ubuntu packages using pbuilder. It is recommended for Ubuntu maintainers or anyone interested in building packages using Ubuntu.

You can build packages without pbuilder but you must already have all the build dependencies of the package that you are building installed on your running system.

The following assume you want to install edgy. If you need a dapper or feisty chroot, then exchange edgy with the appropriate distribution.

Installing Pbuilder on edgy

The latest pbuilder package in Edgy (0.155ubuntu3) should work out of the box. You only need to install it and debootstrap. Then run:

sudo pbuilder create 

and then

sudo pbuilder build my-package_1.0.dsc

Note: If you get the error "debootstrap does not exist", install debootstrap.

Installing Pbuilder on Warty, Hoary or Breezy

Install pbuilder package and debootstrap.

Edit /etc/pbuilder/pbuilderrc changing the following directives:

    MIRRORSITE=http://archive.ubuntu.com/ubuntu
    DISTRIBUTION=breezy

Since pbuilder will complain about unauthenticated packages, you have to allow unauthenticated packages. You can make it like so:

Edit your /etc/pbuilder/pbuilderrc:

    APTCONFDIR="/etc/pbuilder/apt.config/"

Now you'll copy needed files of /etc/apt to it and

    sudo -s
    mkdir /etc/pbuilder/apt.config/
    cp -ar /etc/apt/* /etc/pbuilder/apt.config/
    echo "APT::Get::AllowUnauthenticated 1;" >> /etc/pbuilder/apt.config/apt.conf.d/allow-unauthenticated
    exit

NOTE: Make sure to remove 99update-notifier from /etc/pbuilder/apt.config/apt.conf.d/ if you have copied it in the last step. It can potentially break future updates to your pbuilder chroot, as update-notifier won't normally be installed.

Save the file and run the command below to build your Edgy chroot:

    sudo pbuilder create --distribution edgy

Rebuilding a package

If you reach this point you now have a Edgy chroot located at /var/cache/pbuilder ready to build a package. We will get a Debian source package from Ubuntu repository to test it.

To check if you can download source packages, you will need an uncommented deb-src line in /etc/apt/sources.list, containing:

    deb-src http://archive.ubuntu.com/ubuntu edgy main restricted 

If the line above is there but not uncommented, uncomment it. Make sure your package index files are synchronized so that apt-get knows where to find the sources:

    sudo apt-get update

We will build bc, a simple calculator, from source, let's download the debian source package from ubuntu repository:

    sudo apt-get source bc

You can build the package using your Edgy chroot with the command:

    sudo pbuilder build *.dsc

In the end, the binary and source package will be at /var/cache/pbuilder/result/

Updating a chroot

I recommend you update your chroot before each build, to this task use the command below:

    sudo pbuilder update

Universe support

If you want to rebuild a package from universe or build a new one that needs a package out of main you will need to edit /etc/pbuilderrc again, changing:

    OTHERMIRROR="deb http://archive.ubuntu.com/ubuntu edgy universe multiverse"

Now you need to update your chroot with the new configuration:

    sudo pbuilder update --distribution edgy --override-config

Upgrading to Latest Development Release

If you want to participate in the current release cycle, you will want to have a FeistyFawn chroot. Sometimes, the development version may not be installable directly. In this case, you have to install the latest release first, and upgrade then to development release

• change all occurences of edgy in /etc/pbuilderrc and /etc/pbuilder/apt.config/ to feisty

•  sudo pbuilder update --override-config 

• use the --override-config option every time you run the update

Multiple pbuilders

When you work with packages, you often want to have multple pbuilders on your machine, if for example you want to backport to Dapper while developing on Edgy, or test packages on Sid to track bugs.

To do that, you can adapt the file in /usr/share/doc/pbuilder/examples/pbuilder-distribution.sh, which by default contains :

# script from Jamin W. Collins  BTS: #255165
# name this script 'pbuilder-woody', 'pbuilder-sid', 'pbuilder-sarge', 'pbuilder-experimental' etc.
#
# The script currently contains a minor, but harmless error
# See https://launchpad.net/distros/ubuntu/+source/pbuilder/+bug/57284

OPERATION=$1
DISTRIBUTION=`basename $0 | cut -f2 -d '-'`
PROCEED=false
BASE_DIR="$HOME/pbuilder"
case $OPERATION in
   create|update|build|clean|login|execute )
      PROCEED=true
      ;;
esac
if ( $PROCEED == true ) then
   shift
   sudo pbuilder $OPERATION \
      --basetgz $BASE_DIR/$DISTRIBUTION-base.tgz \
      --distribution $DISTRIBUTION \
      --buildresult $BASE_DIR/result $@
else
   echo "Invalid command..."
   echo "Valid commands are:"
   echo "   create"
   echo "   update"
   echo "   build"
   echo "   clean"
   echo "   login"
   echo "   execute"
   exit 1
fi

Rename it to the distribution you want, e.g. pbuilder-dapper, then put it in /usr/local/bin/ Since /var/cache/pbuilder is the common directory used for pbuilders, I recommend changing the script to the following :

# script from Jamin W. Collins  BTS: #255165
# name this script 'pbuilder-woody', 'pbuilder-sid', 'pbuilder-sarge' etc.
#
# The script currently contains a minor, but harmless error
# See https://launchpad.net/distros/ubuntu/+source/pbuilder/+bug/57284

OPERATION=$1
DISTRIBUTION=`basename $0 | cut -f2 -d '-'`
PROCEED=false
BASE_DIR="/var/cache/pbuilder"
case $OPERATION in
   create|update|build|clean|login|execute )
      PROCEED=true
      ;;
esac
if ( $PROCEED == true ) then
   shift
   sudo /usr/sbin/pbuilder $OPERATION \
      --basetgz $BASE_DIR/$DISTRIBUTION/base.tgz \
      --distribution $DISTRIBUTION \
      --configfile $BASE_DIR/$DISTRIBUTION/pbuilderrc \
      --aptconfdir $BASE_DIR/$DISTRIBUTION/apt.config \
      --buildresult $BASE_DIR/$DISTRIBUTION/result $@

else
   echo "Invalid command..."
   echo "Valid commands are:"
   echo "   create"
   echo "   update"
   echo "   build"
   echo "   clean"
   echo "   login"
   echo "   execute"
   exit 1
fi

Rename it to the distribution you want, e.g. pbuilder-feisty, then put it in /usr/local/bin/ To make it executable, type (use whatever name you have given the script):

sudo chmod +x /usr/local/bin/pbuilder-feisty

Then you should create a /var/cache/pbuilder/DISTRIBUTION directory (e.g. /var/cache/pbuilder/feisty/), put the correct configuration files there (see the previous sections) then run pbuilder-feisty create to create the pbuilder in this location. You can then do the same for other distributions (e.g. pbuilder-edgy, pbuilder-sarge, pbuilder-sid, etc.).

See also

pbuilder User's Manual: http://www.netfort.gr.jp/~dancer/software/pbuilder-doc/pbuilder-doc.html

["CategoryMOTU"]