Ubuntu Wiki

The source for this document can be gotten from Bazaar:

bzr cat lp:indicator-datetime/tests/manual

The source is in the standard manual testing format for Ubuntu QA: Testing/TestCaseFormat

Test Case: indicator-datetime/unity7-items-check

Procedure

• Log in to a Unity 7 user session

• Go to the panel and click on the DateTime indicator

  • Ensure there are items in the menu

Test Case: indicator-datetime/unity7-greeter-items-check

Procedure

• Start a system and wait for the greeter or logout of the current user session

• Go to the panel and click on the DateTime indicator

  • Ensure there are items in the menu

Test Case: indicator-datetime/unity8-items-check

Procedure

• Login to a user session running Unity 8
• Pull down the top panel until it sticks open

• Navigate through the tabs until "Time & Date" is shown

  • Upcoming is at the top of the menu
  • The menu is populated with items

Test Case: indicator-datetime/timezone-change

Procedure

• In System Settings > Time & Date > Time zone, select a different timezone

  • When the timezone is selected, the indicator should show the time in that zone
• Reboot the device
  • The indicator should continue showing the time in the selected zone

Test Case: indicator-datetime/timestamp-wakeup

Procedure

• Unplug the phone from any USB connection and put it to sleep
• Reawaken the device.
  • The indicator should be showing the correct time.

Test Case: indicator-datetime/new-alarm-wakeup

Procedure

• Create and save an upcoming alarm in ubuntu-clock-app
• Unplug the phone from any USB connection and put it to sleep
  • Confirm that the alarm sounds on time even if the phone is asleep. (Note: if in doubt about sleep you can see in the syslog whether the device actually suspended or whether the suspend was aborted)
  • Confirm that the screen comes on when the alarm is triggered.
  • Confirm that, when left untouched, the screen will dim 45 seconds after the alarm was triggered.
  • Confirm that, when left untouched, the screen will turn off 60 seconds after the alarm was triggered.
  • If the device supports haptic feedback, confirm the alarm vibrates.

Test Case: indicator-datetime/calendar-event-reminder-time

Procedure

• Using ubuntu-calendar-app, click on "New Event" to create a calendar event.
• Specify a starting time ("From") to begin an hour plus a few minutes from now.
• Specify a Reminder to trigger 1 hour before the event.
• Save the event in calendar-app.
  • Confirm that the event appears in the indicator's upcoming appointments menu section
  • Confirm that a reminder appears one hour before the event.
  • Note: calendar-app 0.4.600 specifies reminders to occur four times at two-minute intervals, so you will get multiple reminders from this test over eight minutes.

Test Case: indicator-datetime/disabled-alarms

Procedure

• Create and save an upcoming alarm in ubuntu-clock-app
  • Confirm that the alarm icon appears next to the current time in unity's indicator display
• Disable the alarm in ubuntu-clock-app
  • When all alarms are disabled or removed, the alarm icon should disappear.
• Re-enable the alarm in ubuntu-clock-app
  • When the alarm is enabled, the alarm icon should reappear.

Test Case: indicator-datetime/disable-one-time-alarms-after-notification

Procedure

• Create and save an upcoming nonrepeating alarm in ubuntu-clock-app
  • Confirm that the alarm icon appears next to the current time in unity's indicator display
• Wait until the alarm time is reached
  • Confirm that the alarm notification is shown
  • Confirm that the alarm's sound is played while the alarm notification is present
  • Confirm that the one-time alarm is disabled after the notification is shown.

Test Case: indicator-datetime/calendar-event-notification

Procedure

• In the calendar app, create and save a new upcoming calendar event that will occur in the next few minutes.
  • The datetime indicator's event list should update itself to show this new event.
  • Calendar events do not get the alarm icon, so no alarm icon should be shown in the header unless there is also an upcoming alarm set.
• Wait for the event's time to be reached
  • The datetime indicator should pop up a non-interactive notification that plays a nonlooping sound.
  • The notification should disappear after a moment without requiring user intervention.

Test Case: indicator-datetime/alarm-timezone

Procedure

• In ubuntu-system-settings, change your timezone to a zone you're not in
• In ubuntu-clock-app, create and save an upcoming alarm
  • The indicator's menu should show the alarm to click at the specified time
• In ubuntu-system-settings, change back to your correct timezone
  • The indicator's menu should still show the alarm to click at the specified time

Test Case: indicator-datetime/snooze

Procedure

• Create and save an upcoming alarm in ubuntu-clock-app
• When the alarm goes off, press the 'Snooze' button
  • The alarm should go away, then reappear N minutes later. By default the N is 5 minutes but will be configurable from ubuntu-clock-app.
• When the snoozed alarm reappears, press the 'OK' button
  • This time when the alarm is dismissed, it should not reappear.

  • Pressing 'OK' should not cause any other action, eg should not launch ubuntu-clock-app. (Bug #1581089)

Test Case: indicator-datetime/other-vibrations

Procedure

• Test on a device that supports haptic feedback
• Create and save two upcoming alarms in ubuntu-clock-app
• In ubuntu-system-settings' "Sound" page, enable the "Other vibrations" setting
  • Confirm that the device vibrates when the next alarm appears.
• Dismiss the alarm.
• In ubuntu-system-settings' "Sound" page, disable the "Other vibrations" setting
  • Confirm that the device does not vibrate when the next alarm appears.
• Dismiss the alarm.

Test Case: indicator-datetime/edited-alarm-wakeup

Procedure

• Edit an alarm that's already passed. (see previous test)
• Unplug the phone from any USB connection and put it to sleep
  • Confirm that the alarm sounds on time even if the phone is asleep. (Note: if in doubt about sleep you can see in the syslog whether the device actually suspended or whether the suspend was aborted)

    • <dd>Confirm that the screen comes on when the alarm is triggered.<dd>

  • If the device supports haptic feedback, confirm the alarm vibrates.

Test Case: indicator-datetime/tell-snap-decision-to-dismiss

Procedure

• Set an alarm and wait for it to arrive.
  • Alarm should go off at the specified time
• Press the 'Dismiss' button in the alarm's snap decision popup before the sound stops.
  • Popup should disappear
  • Sound should stop at the same time, rather than playing til the end of the file.

Test Case: indicator-datetime/change-alarm-sound

Procedure

• Open the clock app
• Swipe up from the bottom
• Click on the + symbol
• Save an alarm for a few minutes time leave everything on default settings
• Click on save
• Click on the alarm
• Change the sound of the alarm
• Click on save
• Let the alarm go off
  • The newly-selected sound should play, rather than the previous sound.

Test Case: indicator-datetime/silent-mode

Procedure

• Set an alarm and wait for it to arrive.
• From the sound indicator, turn on silent mode.
  • Alarm should go off at the specified time and play its sound regardless of silent mode.
• From the sound indicator, turn on silent mode.
• Create a calendar event from the calendar app and wait for it to arrive.
  • The calendar event notification should be silent.
• From the sound indicator, turn off silent mode.
• Create a calendar event from the calendar app and wait for it to arrive.
  • The calendar event notification should play a sound.

<strong>

• If all actions produce the expected results listed, please submit a 'passed' result. If an action fails, or produces an unexpected result, please submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit your result</strong>.