RestrictedFormats
Disclaimer and Legal Notice
Packages distributed in unofficial repositories are not supported by Ubuntu or Debian. Please don't file bugs caused by the use of third party packages.
Some of the packages listed here may be illegal in your country. Use at your own risk.
Most of the formats listed here have been replaced by FreeFormats and this information is presented here for legacy and migration purposes. Be aware that the usage of non-free programs and formats cannot be supported because of the restrictions that affect them.
Contents
Getting Started
Ensure you have enabled both the Universe and Multiverse repositories before continuing, see AddingRepositoriesHowto for more information.
Codecs and DVD-Video
Some codecs and encrypted DVD playback functionallity is not distributed with Ubuntu for legal reasons. After reading and considering the disclamer and legal notice above, you may enter the following to install and enable the functionallity:
sudo gedit /etc/apt/sources.list
When Gedit appears, enter the following line, then save and close gedit:
deb ftp://ftp.nerim.net/debian-marillat/ testing main
Next update and install packages, this will also add other misc codecs/plugins:
sudo apt-get update sudo apt-get install w32codecs sudo gedit /etc/apt/sources.list
Those using Kubuntu can also install akode-mpeg to enable MP3 playback, and replace gedit with kate.
When gedit appears again, remove the line you added eailer to avoid causing problems with your Ubuntu installation. After doing that, finally:
sudo apt-get update sudo apt-get install totem-xine gstreamer0.8-misc gstreamer0.8-plugins gstreamer0.8-plugins-multiverse sudo apt-get install gstreamer0.8-mad gstreamer0.8-ffmpeg libmad0 msttcorefonts libdvdread3 sudo /usr/share/doc/libdvdread3/examples/install-css.sh gst-register-0.8
DVD Issues
If your video playback software (e.g. Xine, MPlayer, Totem, etc.) locks up when attempting to access a DVD, you will need to place a DVD movie in your DVD drive then do the following:
sudo apt-get install regionset regionset
If DVD playback is jerky or you notice optical data transfer (i.e burning a CD/DVD) is slower than it should be then you need to enable DMA transfer for that drive. See the ["DMA"] page for details.
For backing up DVDs see ["DVDRippingandEncoding"].
Java
The easiest method is to use the Blackdown Java 1.4 installer. To install Java with the installer, just do:
sudo apt-get install j2re1.4
Ubuntu PPC, please see: ["JavaPPC"]. Ubuntu AMD64, please see: ["JavaAMD64"].
The alternative method which will get you the latest version from Sun and also works better for most applications is to install the Sun version of Java. Sun's implementation of Java and Java plugin for browsers is also non-free. Free Java is in active development and will be the preferred choice in the future also as a browser plugin (currently it is used in some programs like OpenOffice.org). Meanwhile, if you require Java support you have to install Sun's Java, assuming they happen to support your platform.
Go to http://java.sun.com/j2se/1.5.0/download.jsp and click on “Download JRE 5.0 Update 4”. Ensure you do not choose the link with the NetBeans bundle.
You must first accept the licence, then click on “Linux self-extracting file” (jre-1_5_0_04-linux-i586.bin). Save this file to your hard drive.
Install the java-package:
sudo apt-get install java-package
Make the downloaded file executable. At the command line, change to the directory where you downloaded the file, and type
chmod +x jre-1_5_0_04-linux-i586.bin
To install JRE, run the downloaded file. Type
fakeroot make-jpkg jre-1_5_0_04-linux-i586.bin sudo dpkg -i sun-j2re1.5_1.5.0+update04_i386.deb
Realplayer
Realplayer is contained in the Ubuntu repositories, to install it just do:
sudo apt-get install realplayer
Sound Problems
MP3 Ripping and Encoding
- ["CDRipping"]
MP3 decoding in K3b
Starting with Breezy (Ubuntu 4.10), K3B does not come with MP3 decoding support out of the box. Installing the k3b-mp3 package will enable it:
sudo apt-get install k3b-mp3
Macromedia Flash
Flash for i386
This will install the non-free Flash player and the plugins needed to view it in Firefox and Mozilla. If you have problems viewing text in some Flash files, you may need to install the msttcorefonts package, which is also in multiverse.
Note that this package doesn't exist for the amd64 architecture, as Macromedia has not yet produced a binary.
sudo apt-get install flashplugin-nonfree
After flash is installed, if the sound is not working properly, try typing the following in a terminal:
sudo ln -s /usr/lib/libesd.so.0 /usr/lib/libesd.so.1
If you use an Intel 855GM video card, ensure you set the X server colour depth to 24 bits, otherwise you will probably experience Firefox crashes.
Flash for x86_64
For those of us with 64 bit processors (or Mac) there is no non-free flash implementation available because the manufacturer does not support them. However, there are 2 free implementations. One is gplflash and the other is swfdec. There's also gplflash2 in development that aims to be the proper free, open source replacement for all the platforms. While you can install them using apt-get, they tend to not work very well and be unstable, so that option is not great. Better to install one of them (I recommend gplflash) manually.
To install gplflash:
Download the latest version of gplflash (at the time of writing it was 0.4.13) from https://sourceforge.net/project/showfiles.php?group_id=110956.
$ wget -c http://prdownloads.sourceforge.net/gplflash/gplflash-0.4.13.tar.bz2?download
Sub in the latest version if it is no longer 0.4.13. Decompress the files.
$ tar xvjf gplflash-0.4.13.tar.bz2
Change to the install directory.
$ cd gplflash-0.4.13
Compile the player and plugin.
$ ./configure --prefix=/usr --with-plugin-dir=/usr/lib/mozilla-firefox/plugins/ $ make $ sudo make install
Finally add /usr to the path variable so that the player itself will work, not just the plugin.
$ sudo PATH=$PATH:/usr
AAC and iTunes Music Store
AAC decoding
The default audio format used by Apple's iTunes and iPod is AAC. This is a variant of the MPEG standard, and as such has patent issues. However, you can listen to AAC files in rhythmbox or amaroK by installing gstreamer0.8-faad. You will need this for listening to any AAC file, including those bought from the iTunes Music Store (see below for more info on using the music store on Linux). Warning, songs purchased from the iTunes music store (.m4p) are encyrpted, and will not just play using gstreamer0.8-faad. You will need to decrypt them first.
AAC encoding:
FAAC can be used to encode AACs, although this is somewhat experimental compared to MP3 encoding at this point. For encoding programs which use gstreamer, there is a gstreamer plugin called gstreamer0.8-faac. However, this currently is problematic, and does not produce usable AAC files, though this may change in the future.
For other programs, you may be able to utilize FAAC directly to encode to AACs - just install the "faac" package. You can make iPod-compatible AACs this way, but this requires some additional configuration in your CD ripping utility.
iTunes Music Store
Apple's iTunes Music Store sells music online with a large selection of artists. Songs are in 128K AAC format, and cost varies by country. Apple only has Mac and Windows clients, but it also can be used on Linux. There are two different methods by which this can be done.
First of all, you can use CodeWeavers CrossOver Office (available at http://www.codeweavers.com) to install the Windows version of iTunes on Ubuntu. This will allow you to buy iTunes songs on Linux and listen to them. However, the main caveats of this approach is that 1) it costs money 2) it is not a fully Linux-native solution.
As an alternative to using CrossOver, there is a new, Free program called PyMusique which allows basic usage of the iTunes Music Store on Linux. This works better than using iTunes on CrossOver, but PyMusique has less features than the official iTunes client at this point and may be in violation of the iTunes Music Store terms of service. To use this on Ubuntu, first install gstreamer0.8-faad and libmcrypt4. Then, go to http://fuware.nanocrew.net/pymusique/ or a mirror (google "pymusique 0.4" for mirrors) and download the pymusique, python2.4-mcrypt, python2.4-vlc, and python2.4-mp4ff packages. Finally, install all the packages you downloaded from the above website. You can now launch PyMusique from the Applications-Internet menu, and purchase songs (although you may have to restart your system for this to work).