SnappyConfinement
Size: 18021
Comment:
|
Size: 17649
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 6: | Line 6: |
* '''Packages affected''': apparmor, apparmor-easyprof-ubuntu-snappy, click-apparmor, snappy | * '''Packages affected''': apparmor, ubuntu-core-security, click-apparmor, snappy |
Line 21: | Line 21: |
'''IMPORTANT''': the subsections for native snap format are currently being implemented. Please see 'Transitional click format' (below) for information on security policy until this is implemented. | |
Line 62: | Line 61: |
`apparmor` policy templates and policy groups are shipped on the snappy system (eg, the `apparmor-easyprof-ubuntu-snappy` package) and also via framework policy snaps. Apps that depend on a particular framework may reference the framework policy snap's templates and/or groups. Importantly, frameworks are shipped (and therefore controlled) separately from the framework policy. | `apparmor` policy templates and policy groups are shipped on the snappy system and also via framework snaps. Apps that depend on a particular framework may reference the framework snap's policy templates and/or groups. |
Line 87: | Line 86: |
Like with `apparmor` (see above), on snap package install the yaml is examined and seccomp filter lists are generated for each service and binary. These seccomp filter lists are template based and may be extended through filter groups, which are expressed in the yaml as `caps`. For simplicity, the seccomp filter groups and templates will have the same names as the corresponding `apparmor` policy groups and templates such that: * If unspecified in the packaging yaml, `snappy` will choose the `default` filter template and `networking` filter group (this may change as snappy involves) |
Like with `apparmor` (see above), on snap package install the yaml is examined and seccomp filter lists are generated for each service and binary. These seccomp filter lists are template based and may be extended through policy groups, which are expressed in the yaml as `caps`. For simplicity, the seccomp policy groups and templates will have the same names as the corresponding `apparmor` policy groups and templates such that: * If unspecified in the packaging yaml, `snappy` will choose the `default` filter template and `networking` policy group (this may change as snappy involves) |
Line 113: | Line 112: |
===== Cgroups (DRAFT) ===== Certain cgroups will be setup per app and there will be a mapping from the APP_ID to the cgroup id. This will be used to for example tag network traffic. |
===== Cgroups ===== TBD: certain cgroups will be setup per app and there will be a mapping from the APP_ID to the cgroup id. This will be used to for example tag network traffic. |
Line 117: | Line 116: |
TODO: a mechanism will be provided for apps to drop privileges === Transitional click format === At first, under the hood the `snappy build` command will initially create a click format package using the [[https://developer.ubuntu.com/en/snappy/guides/packaging-format-apps/|yaml syntax]]. Eventually `snappy build` will create a native snap formatted package (see above) and not use the click format. This section describes the transition implementation. |
TBD: a mechanism will be provided for apps to drop privileges === Transitional click format (old) === At first, under the hood the `snappy build` command initially created a click format package using the [[https://developer.ubuntu.com/en/snappy/guides/packaging-format-apps/|yaml syntax]]. Eventually `snappy build` will create a native snap formatted package (see above) and not use the click format. This section describes the transition implementation. |
Line 132: | Line 131: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, "template": "default", "policy_groups": [ "networking" ] } }}} The defaults provided may change as the confinement needs evolve. The template policy is found in `/usr/share/apparmor/easyprof/templates/ubuntu-snappy/1.3/default` and the `networking` policy is found in `/usr/share/apparmor/easyprof/policy-groups/ubuntu-snappy/1.3/networking`. |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking" ] } }}} The defaults provided may change as the confinement needs evolve. The template policy is found in `/usr/share/apparmor/easyprof/templates/ubuntu-core/15.04/default` and the `networking` policy is found in `/usr/share/apparmor/easyprof/policy-groups/ubuntu-core/15.04/networking`. |
Line 157: | Line 156: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, |
Line 285: | Line 284: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, |
Line 295: | Line 294: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, |
Line 306: | Line 305: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, |
Line 316: | Line 315: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, |
Line 326: | Line 325: |
"policy_vendor": "ubuntu-snappy", "policy_version": 1.3, |
"policy_vendor": "ubuntu-core", "policy_version": 15.04, |
Created: 2014-12-05
Created by: Jamie Strandboge
Contributors: Jamie Strandboge, Tyler Hicks, Marc Deslauriers
Packages affected: apparmor, ubuntu-core-security, click-apparmor, snappy
Status: Alpha
Introduction
Snappy confinement is an evolution of the security model for Ubuntu Touch. The basic concepts for confined applications and the AppStore model pertain to snappy applications as well. In short, applications are confined by default through the use of various technologies and this is achieved through a simple template-based system where policy is extended through the use of policy groups.
It will be most helpful if you are familiar with:
Implementation summary
Snappy uses a simple packaging format that is an evolution of click packaging. Snappy packages use a declarative yaml syntax and defaults to using default AppArmor template and the "networking" policy group. Apps will be able to customize the default behavior in a number of ways via the yaml syntax.
Native snap format
Security policy
Security policy in snappy will be by using a number of technologies including apparmor, seccomp, cgroups, etc. Internally, the security policy is generated based on what is in the snappy packaging yaml. Applications are tracked by the system by using the concept of an ApplicationId. The APP_ID is the composition of the package name, the service/binary name and package version. The APP_ID takes the form of <pkgname>_<appname>_<version>. For example, if this is in packaging yaml:
name: foo version: 0.1 ... services: - name: bar start: bin/bar
Then the APP_ID for the 'bar' service is foo_bar_0.1. Notice, this is '<name>/<basename of binary/service name>'). The APP_ID is used throughout the system including in the enforcement of security policy.
A launcher will be implemented that will:
- setup cgroups (tag network traffic, block devices, memory*)
- setup iptables (for internal app access)
- drop privileges to uid of service
- setup seccomp
- setup various environment variables (eg, SNAP_APP_PATH, SNAP_APP_DATA_PATH, SNAP_APP_USER_DATA_PATH, SNAP_APP_TMPDIR, SNAP_OLD_PWD, SNAP_APP_ARCH and HOME).
- chdir to SNAP_APP_PATH (the install directory)
- exec the app under apparmor profile under default nice value
The launcher will be used when lauching both services and using CLI binaries. The default policy allows ELF executables, python, perl and shell (with selected corresponding utilities from /bin and /usr/bin), disallows capabilities(7) and enforces application isolation as per the snappy FHS.
AppArmor
Upon snap package install, the yaml is examined and apparmor profiles are generated for each service and binary and have names based on the APP_ID. apparmor profiles are template based and may be extended through policy groups, which are expressed in the yaml as caps.
If unspecified in the packaging yaml, snappy will choose the default template and networking policy group (this may change as snappy involves)
Apps may choose to specify an alternate confinement for binaries and services by specifying caps and/or security-template in the yaml. Eg:
... services: - name: bar start: bin/bar caps: networking - name: baz start: bin/baz security-template: nondefault caps: networking, something, etc
apparmor policy templates and policy groups are shipped on the snappy system and also via framework snaps. Apps that depend on a particular framework may reference the framework snap's policy templates and/or groups.
Apps may also optionally specify security-override to specify high level overrides to use when security-template’ and caps’ are not sufficient. The path specified by security-override is a custom security manifest. Use of this will trigger manual review in the Ubuntu store. Eg:
services: - name: bar start: bin/bar caps: networking - name: baz start: bin/baz security-overrides: apparmor: path/to/security override
Furthermore, apps may also specify security-policy instead of using the template based policy to use hand-crafted apparmor policy. Use of this will trigger a manual review in the Ubuntu store. Eg:
services: - name: bar start: bin/bar caps: networking - name: baz start: bin/baz security-policy: apparmor: meta/apparmor.profile
Seccomp
Like with apparmor (see above), on snap package install the yaml is examined and seccomp filter lists are generated for each service and binary. These seccomp filter lists are template based and may be extended through policy groups, which are expressed in the yaml as caps. For simplicity, the seccomp policy groups and templates will have the same names as the corresponding apparmor policy groups and templates such that:
If unspecified in the packaging yaml, snappy will choose the default filter template and networking policy group (this may change as snappy involves)
Apps may choose to specify an alternate confinement for binaries and services by specifying caps and/or security-template
Apps may also optionally specify security-override to specify high level overrides to use when security-template and caps are not sufficient. The path specified by security-override is a custom seccomp filter manifest. Use of this will trigger manual review in the Ubuntu store. Eg:
services: - name: bar start: bin/bar caps: networking - name: baz start: bin/baz security-overrides: seccomp: path/to/filter override
Furthermore, apps may also specify security-policy instead of using the template based policy to use hand-crafted seccomp filters. Use of this will trigger a manual review in the Ubuntu store. Eg:
services: - name: bar start: bin/bar caps: networking - name: baz start: bin/baz security-policy: seccomp: meta/seccomp-filter.list
Cgroups
TBD: certain cgroups will be setup per app and there will be a mapping from the APP_ID to the cgroup id. This will be used to for example tag network traffic.
Privilege dropping
TBD: a mechanism will be provided for apps to drop privileges
Transitional click format (old)
At first, under the hood the snappy build command initially created a click format package using the yaml syntax. Eventually snappy build will create a native snap formatted package (see above) and not use the click format. This section describes the transition implementation.
Upon package install:
the security policy is generated (running any click hooks, such as aa-clickhook)
- launcher preparation is performed:
for services, a systemd service file is generated from the yaml (initially, AppArmorProfile=<profilename> is added to this service file, but eventually the launcher will be used)
- for cli binaries, the binary will be registered with the system and added to the user's PATH (initially, a shell wrapper script is created in /apps/bin for each cli binary)
apparmor hook
Under the hood, the security manifest is used to describe the apparmor confinement of the app. Most apps do not need to specify anything for confinement and snappy will create a security manifest like the following:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking" ] }
The defaults provided may change as the confinement needs evolve. The template policy is found in /usr/share/apparmor/easyprof/templates/ubuntu-core/15.04/default and the networking policy is found in /usr/share/apparmor/easyprof/policy-groups/ubuntu-core/15.04/networking.
You may provide your own security json to extend security policy in various ways by using the apparmor integration section. Specifying apparmor may trigger a manual review in the store, and is not needed for normal Snappy apps, but instead is provided for trusted snappy applications. Eg:
... services: - name: bar start: bin/bar ports: required: 80/tcp integration: bar: apparmor: meta/bar.apparmor
With the above yaml, you can now create meta/bar.apparmor that contains:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking" ], "write_path": [ "/some/path" ] }
upon snap install, the click security json is symlinked into /var/lib/apparmor/clicks
aa-clickhook is run on install and places the profile in /var/lib/apparmor/profiles (prefixed with 'click_')
aa-clickhook is shipped in click-apparmor
use of apparmor may trigger a manual review via the store (depending on the contents of the security json)
see the click manifest documentation for details
IMPORTANT: due to a limitation in click, if you install an already installed snap with the same version, the click hooks may not be run. If you are trying to adjust policy, you may need to run 'sudo aa-clickhook -f' to force regeneration of the profiles.
apparmor-profile hook
In addition to the above, specialized, hand-crafted confinement may be done via the apparmor-profile integration section. Specifying apparmor-profile will trigger a manual review in the store, and is not needed for normal Snappy apps, but instead is provided for snappy framework and trusted snappy applications.
The aa-profile-hook works similarly to aa-clickhook:
The snappy packaging specifies to use 'apparmor-profile' in its 'integration' section, which specifies the profile. Eg:
... services: - name: bar start: bin/bar ports: required: 80/tcp integration: bar: apparmor-profile: meta/bar.profile
the profile should reference the AppArmor variables for CLICK_DIR, APP_PKGNAME, APP_APPNAME, APP_VERSION and for profile attachment, just like the apparmor template does with click-apparmor
aa-profile-hook is run on install and places the profile in /var/lib/apparmor/profiles (prefixed with 'profile_')
If the binary is a service, snappy-systemd makes sure /etc/systemd/system/<service>.service launches the service using ubuntu-snapp-launch (snappy-systemd temporarily sets AppArmorProfile=<profilename> instead of using the launcher)
aa-profile-hook is shipped in click-apparmor
use of apparmor-profile requires manual review via the store.
To improve maintenace, the profile author can use AppArmor variables to avoid worrying about updating the profile name, the app name, where the app is installed or knowing the package version. Example profile:
#include <tunables/global> # Specified profile variables ###VAR### ###PROFILEATTACH### (attach_disconnected) { #include <abstractions/base> #include <abstractions/nameservice> # Read-only for the install directory @{CLICK_DIR}/@{APP_PKGNAME}/ r, @{CLICK_DIR}/@{APP_PKGNAME}/@{APP_VERSION}/ r, @{CLICK_DIR}/@{APP_PKGNAME}/@{APP_VERSION}/** mrklix, # Writable home area owner @{HOMEDIRS}/apps/@{APP_PKGNAME}/ rw, owner @{HOMEDIRS}/apps/@{APP_PKGNAME}/** mrwklix, # Read-only system area for other versions /var/lib/apps/@{APP_PKGNAME}/ r, /var/lib/apps/@{APP_PKGNAME}/** mrkix, # Writable system area only for this version. /var/lib/apps/@{APP_PKGNAME}/@{APP_VERSION}/ w, /var/lib/apps/@{APP_PKGNAME}/@{APP_VERSION}/** wl, ... specialized confinement ...
Example yaml to use the profile:
name: foo version: 0.1 ... services: - name: bar start: bin/bar ports: required: 80/tcp integration: bar: apparmor-profile: meta/bar.profile
You may not specify the apparmor and apparmor-profile for the same <appname> (eg, specifying "apparmor-profile": "meta/appname.profile" and "apparmor": "meta/appname.apparmor" is an error).
Normal usage
As stated, the snappy packaging yaml does not have to do anything to specify the default confinement. Eg, the following yaml:
name: foo version: 0.1 ... services: - name: bar start: bin/bar - name: baz start: bin/baz - name: norf start: bin/norf
will create the following AppArmor profiles with default confinement:
- foo_bar_0.1
- foo_baz_0.1
- foo_norf_0.1
Advanced usage
While the snappy packaging yaml is intentionally simple and straightforward for app developers, it can also quite flexible for those who need it. For example, consider the following yaml:
name: foo version: 0.1 ... services: - name: normal-service start: bin/normal-service - name: extra-policy-group-service start: bin/extra-policy-group-service caps: networking, extra - name: non-default-template-service start: bin/non-default-template-service security-template: non-default binaries: - name: bin/normal-binary - name: extra-policy-group-binary caps: networking, extra
snappy will generate the following security manifests:
normal-service:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking" ] }
extra-policy-group-service:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking", "extra" ] }
non-default-template-service:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "non-default", "policy_groups": [ "networking" ] }
normal-binary:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking" ] }
extra-policy-group-binary:
{ "policy_vendor": "ubuntu-core", "policy_version": 15.04, "template": "default", "policy_groups": [ "networking", "extra" ] }
Which in turn creates the following AppArmor profiles:
- foo_normal-service_0.1
- foo_extra-policy-group-service_0.1
- foo_non-default-template-service_0.1
- foo_normal-binary_0.1
- foo_extra-policy-group-binary_0.1
Debugging
To check to see if you have any denials:
$ sudo journalctl --no-pager -k | grep DEN
A denial will look something like:
apparmor="DENIED" operation="mkdir" profile="foo_bar_0.1" name="/var/lib/foo" pid=637 comm="bar" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
If there are no denials, AppArmor shouldn't be blocking the app.
If there are denials, you can unblock yourself by:
- modifying the profile in /var/lib/apparmor/profiles that corresponds to your app
reload the profile with:
$ sudo apparmor_parser -r /var/lib/apparmor/profiles/<profile>
Do note that the local modification will not be preserved on package update. If you believe you have found a bug, please file a bug against: https://bugs.launchpad.net/ubuntu/+source/apparmor/+filebug
Helpful degugging commands
sudo aa-clickhook -f will regenerate all the apparmor profiles in /var/lib/apparmor/profiles
sudo aa-profile-hook -f will regenerate all the apparmor-profile profiles in /var/lib/apparmor/profiles
sudo aa-status will show you the profiles loaded in the kernel and what processes are running under them
ps Z, ps Z <pid> and ps auxwwZ will show you normal ps output, but with the apparmor label the profile is running under
sudo systemctl stop <app>.service and sudo systemctl start <app>.service to stop and start services from /etc/systemd/system (ie, where snappy-systemd puts the service files)
- This is often helpful when developing your app or policy for it:
In one terminal launch (tail kernel log for AppArmor denials):
$ sudo journalctl -f -k | grep DEN
In another (service name is the filename in /etc/systemd/system):
$ sudo journalctl -f -u <service name>
Then launch the app with systemctl like above, or launch manually under confinement with:
$ aa-exec -p <profile name> -- /apps/<pkgname>/<version>/...
Future work
Confining snappy apps (particularly processes requiring root) may use AppArmor-wrapped user namespaces.
SecurityTeam/Specifications/SnappyConfinement (last edited 2016-11-17 16:29:21 by jdstrand)