Ubuntu Wiki

* Contact: ["XavierVerne"]

• Make: Sony
• Brand: Vaio
• Model: VGN-FE11H

• Website: http://vaio.sony-europe.com/view/ShowProduct.action?product=VGN-FE11H&site=ite_fr_FR&pageType=Overview&category=VN+FE+Series

• S/N: N/A

Current Issues

Issues with suspend to ram

Issues with wireless (no hardware detected)

* Power Management

• Gnome power management doesn't give correct values : time remaining indicated is not reliable : it CHANGES all the time ! From one read to another it goes from 42mn to 2h 10, through 1h, all in 5mn and 2% battery later. Added to this : sometimes it detects a critically low level and immediately shutdown !
• Battery charge applet : no time indicated, only percentage (look reliable)
• Suspend capabilities : suspend to ram (Sleep) doesn't work.

* Touchpad

• Kinda work, the touchpad is very slow and System->Preferences->Mouse doesn't seem to apply anything

=> May be a X-Server configuration pb, other similar pbs have been reported, perhaps same xconfig file just works.

• Touchpad left-click (on it, not click buttons below) straight on the surface doesn't work either, as well as vertical and horizontal scrolls.
• The 2 buttons that work for left and right click work out of the box.

Hardware details

Notes

I include dmessage output for hardware detection, just in case

[4294667.296000] Linux version 2.6.15-18-386 (buildd@rothera) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 PREEMPT Thu Mar 9 14:41:49 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000c2000 - 00000000000d0000 (reserved) [4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) [4294667.296000] BIOS-e820: 000000003fe90000 - 000000003fe9a000 (ACPI data) [4294667.296000] BIOS-e820: 000000003fe9a000 - 000000003ff00000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [4294667.296000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [4294667.296000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [4294667.296000] 126MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f7330 [4294667.296000] On node 0 totalpages: 261776 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32400 pages, LIFO batch:7 [4294667.296000] DMI present. [4294667.296000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7260 [4294667.296000] ACPI: RSDT (v001 Sony Capell00 0x20060217 PTL 0x00000000) @ 0x3fe931d5 [4294667.296000] ACPI: FADT (v002 Sony J3 0x20060217 PTL 0x0000005a) @ 0x3fe99e10 [4294667.296000] ACPI: MADT (v001 Sony J3 0x20060217 PTL 0x0000005a) @ 0x3fe99e94 [4294667.296000] ACPI: BOOT (v001 Sony J3 0x20060217 PTL 0x00000001) @ 0x3fe99fd8 [4294667.296000] ACPI: MCFG (v001 Sony J3 0x20060217 PTL 0x0000005a) @ 0x3fe99f34 [4294667.296000] ACPI: MADT (v001 Sony J3 0x20060217 PTL 0x00000000) @ 0x3fe99f70 [4294667.296000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050228) @ 0x3fe9423d [4294667.296000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050228) @ 0x3fe93ba1 [4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x3fe93219 [4294667.296000] ACPI: DSDT (v001 Sony J3 0x20060217 PTL 0x20050228) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: 2 duplicate APIC table ignored. [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:14 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [4294667.296000] Processor #1 6:14 APIC version 20 [4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 1 already used, trying 2 [4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: BOOT_IMAGE=/install/vmlinuz boot=casper initrd=/install/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 1663.516 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294667.736000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294667.737000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294667.775000] Memory: 1027420k/1047104k available (1971k kernel code, 19036k reserved, 599k data, 288k init, 129600k highmem) [4294667.775000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294667.835000] Calibrating delay using timer specific routine.. 3329.13 BogoMIPS (lpj=1664566) [4294667.835000] Security Framework v1.0.0 initialized [4294667.835000] SELinux: Disabled at boot. [4294667.835000] Mount-cache hash table entries: 512 [4294667.835000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [4294667.835000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [4294667.835000] monitor/mwait feature present. [4294667.835000] using mwait in idle threads. [4294667.835000] CPU: L1 I cache: 32K, L1 D cache: 32K [4294667.835000] CPU: L2 cache: 2048K [4294667.835000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [4294667.835000] mtrr: v2.0 (20020519) [4294667.835000] CPU: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [4294667.835000] Enabling fast FPU save and restore... done. [4294667.835000] Enabling unmasked SIMD FPU exception support... done. [4294667.835000] Checking 'hlt' instruction... OK. [4294667.839000] checking if image is initramfs... it is [4294668.915000] Freeing initrd memory: 6735k freed [4294668.919000] ACPI: Looking for DSDT ... not found! [4294668.944000] ENABLING IO-APIC IRQs [4294668.944000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294669.055000] NET: Registered protocol family 16 [4294669.055000] EISA bus registered [4294669.055000] ACPI: bus type pci registered [4294669.055000] PCI: PCI BIOS revision 2.10 entry at 0xfd863, last bus=10 [4294669.055000] PCI: Using MMCONFIG [4294669.056000] ACPI: Subsystem revision 20051216 [4294669.059000] ACPI: Interpreter enabled [4294669.059000] ACPI: Using IOAPIC for interrupt routing [4294669.060000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.060000] PCI: Probing PCI hardware (bus 00) [4294669.063000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [4294669.063000] Boot video device is 0000:01:00.0 [4294669.064000] PCI: Transparent bridge - 0000:00:1e.0 [4294669.064000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.077000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [4294669.079000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [4294669.079000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [4294669.079000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [4294669.080000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [4294669.082000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [4294669.083000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) [4294669.084000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [4294669.084000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [4294669.085000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [4294669.085000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [4294669.085000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [4294669.086000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15) [4294669.086000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15) [4294669.086000] ACPI: Embedded Controller [EC] (gpe 23) interrupt mode. [4294669.093000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.093000] pnp: PnP ACPI init [4294669.095000] pnp: PnPACPI: unknown resource type 7 [4294669.095000] pnp: PnPACPI: METHOD_NAMECRS failure for PNP0c02 [4294669.095000] pnp: PnPACPI: unknown resource type 7 [4294669.095000] pnp: PnPACPI: METHOD_NAMECRS failure for PNP0200 [4294669.095000] pnp: PnPACPI: unknown resource type 7 [4294669.095000] pnp: PnPACPI: METHOD_NAMECRS failure for INT0800 [4294669.096000] pnp: PnPACPI: unknown resource type 7 [4294669.096000] pnp: PnPACPI: METHOD_NAMECRS failure for PNP0c04 [4294669.096000] pnp: PnPACPI: unknown resource type 7 [4294669.096000] pnp: PnPACPI: METHOD_NAMECRS failure for PNP0c02 [4294669.096000] pnp: PnPACPI: unknown resource type 7 [4294669.096000] pnp: PnPACPI: METHOD_NAMECRS failure for PNP0b00 [4294669.096000] pnp: PnPACPI: unknown resource type 7 [4294669.096000] pnp: PnPACPI: METHOD_NAMECRS failure for PNP0303 [4294669.096000] pnp: PnPACPI: unknown resource type 7 [4294669.096000] pnp: PnPACPI: METHOD_NAMECRS failure for SNY9001 [4294669.096000] pnp: PnP ACPI: found 1 devices [4294669.096000] PnPBIOS: Disabled by ACPI PNP [4294669.096000] PCI: Using ACPI for IRQ routing [4294669.096000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.136000] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0 [4294669.136000] PCI: Bridge: 0000:00:01.0 [4294669.136000] IO window: disabled. [4294669.136000] MEM window: d0000000-d1ffffff [4294669.136000] PREFETCH window: b0000000-bfffffff [4294669.136000] PCI: Bridge: 0000:00:1c.0 [4294669.136000] IO window: 2000-2fff [4294669.136000] MEM window: c8000000-c9ffffff [4294669.136000] PREFETCH window: c0000000-c1ffffff [4294669.136000] PCI: Bridge: 0000:00:1c.1 [4294669.136000] IO window: 3000-3fff [4294669.136000] MEM window: ca000000-cbffffff [4294669.136000] PREFETCH window: c2000000-c3ffffff [4294669.136000] PCI: Bridge: 0000:00:1c.2 [4294669.136000] IO window: 4000-4fff [4294669.136000] MEM window: cc000000-cdffffff [4294669.136000] PREFETCH window: c4000000-c5ffffff [4294669.136000] PCI: Bridge: 0000:00:1c.3 [4294669.136000] IO window: 5000-5fff [4294669.136000] MEM window: ce000000-cfffffff [4294669.136000] PREFETCH window: c6000000-c7ffffff [4294669.136000] PCI: Bus 11, cardbus bridge: 0000:0a:03.0 [4294669.136000] IO window: 00006400-000064ff [4294669.136000] IO window: 00006800-000068ff [4294669.136000] PREFETCH window: 50000000-51ffffff [4294669.136000] MEM window: 52000000-53ffffff [4294669.136000] PCI: Bridge: 0000:00:1e.0 [4294669.136000] IO window: 6000-6fff [4294669.136000] MEM window: d2000000-d20fffff [4294669.136000] PREFETCH window: 50000000-51ffffff [4294669.136000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294669.136000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294669.136000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 [4294669.136000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [4294669.136000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169 [4294669.136000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [4294669.136000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 [4294669.136000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [4294669.136000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 193 [4294669.136000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [4294669.136000] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) [4294669.136000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294669.136000] PCI: Enabling device 0000:0a:03.0 (0000 -> 0003) [4294669.136000] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294669.136000] Simple Boot Flag at 0x36 set to 0x1 [4294669.137000] audit: initializing netlink socket (disabled) [4294669.137000] audit(1142966698.136:1): initialized [4294669.137000] highmem bounce pool size: 64 pages [4294669.137000] VFS: Disk quotas dquot_6.5.1 [4294669.137000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.137000] Initializing Cryptographic API [4294669.137000] io scheduler noop registered [4294669.137000] io scheduler anticipatory registered [4294669.137000] io scheduler deadline registered [4294669.137000] io scheduler cfq registered [4294669.137000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294669.137000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294669.137000] assign_interrupt_mode Found MSI capability [4294669.137000] Allocate Port Service[pcie00] [4294669.138000] Allocate Port Service[pcie03] [4294669.138000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 [4294669.138000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [4294669.138000] assign_interrupt_mode Found MSI capability [4294669.138000] Allocate Port Service[pcie00] [4294669.138000] Allocate Port Service[pcie02] [4294669.138000] Allocate Port Service[pcie03] [4294669.138000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169 [4294669.138000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [4294669.138000] assign_interrupt_mode Found MSI capability [4294669.138000] Allocate Port Service[pcie00] [4294669.138000] Allocate Port Service[pcie02] [4294669.138000] Allocate Port Service[pcie03] [4294669.138000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 [4294669.138000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [4294669.138000] assign_interrupt_mode Found MSI capability [4294669.138000] Allocate Port Service[pcie00] [4294669.138000] Allocate Port Service[pcie02] [4294669.138000] Allocate Port Service[pcie03] [4294669.138000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 193 [4294669.138000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [4294669.138000] assign_interrupt_mode Found MSI capability [4294669.138000] Allocate Port Service[pcie00] [4294669.138000] Allocate Port Service[pcie02] [4294669.138000] Allocate Port Service[pcie03] [4294669.139000] isapnp: Scanning for PnP cards... [4294669.496000] isapnp: No Plug & Play device found [4294669.518000] PNP: No PS/2 controller found. Probing ports directly. [4294669.520000] i8042.c: Detected active multiplexing controller, rev 1.1. [4294669.524000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [4294669.526000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [4294669.527000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [4294669.528000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [4294669.529000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294669.529000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [4294669.530000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize [4294669.530000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294669.530000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294669.530000] ACPI: bus type ide registered [4294669.530000] mice: PS/2 mouse device common for all mice [4294669.531000] EISA: Probing bus 0 at eisa.0 [4294669.531000] Cannot allocate resource for EISA slot 1 [4294669.531000] Cannot allocate resource for EISA slot 2 [4294669.531000] Cannot allocate resource for EISA slot 3 [4294669.531000] Cannot allocate resource for EISA slot 4 [4294669.531000] Cannot allocate resource for EISA slot 5 [4294669.531000] Cannot allocate resource for EISA slot 6 [4294669.531000] EISA: Detected 0 cards. [4294669.531000] NET: Registered protocol family 2 [4294669.541000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [4294669.541000] TCP established hash table entries: 131072 (order: 7, 524288 bytes) [4294669.541000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294669.542000] TCP: Hash tables configured (established 131072 bind 65536) [4294669.542000] TCP reno registered [4294669.542000] TCP bic registered [4294669.542000] NET: Registered protocol family 1 [4294669.542000] NET: Registered protocol family 8 [4294669.542000] NET: Registered protocol family 20 [4294669.542000] Using IPI Shortcut mode [4294669.542000] ACPI wakeup devices: [4294669.542000] PWRB PXS1 PXS2 PXS3 PXS4 PXS5 PXS6 USB1 USB2 USB3 USB4 USB7 LANC [4294669.542000] ACPI: (supports S0 S3 S4 S5) [4294669.542000] Freeing unused kernel memory: 288k freed [4294669.646000] vga16fb: initializing [4294669.646000] vga16fb: mapped to 0xc00a0000 [4294669.923000] Console: switching to colour frame buffer device 80x25 [4294669.923000] fb0: VGA16 VGA frame buffer device [4294670.144000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294671.152000] Capability LSM initialized [4294671.206000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [4294671.207000] ACPI: Processor [CPU0] (supports 8 throttling states) [4294671.210000] ACPI: Thermal Zone [TZ00] (57 C) [4294671.212000] ACPI: Thermal Zone [TZ01] (57 C) [4294671.705000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [4294671.705000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 [4294671.705000] ICH7: chipset revision 2 [4294671.705000] ICH7: not 100% native mode: will probe irqs later [4294671.705000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [4294671.705000] Probing IDE interface ide0... [4294672.377000] hda: PIONEER DVD-RW DVR-K16M, ATAPI CD/DVD-ROM drive [4294672.989000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294672.999000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(33) [4294672.999000] Uniform CD-ROM driver Revision: 3.20 [4294673.265000] SCSI subsystem initialized [4294673.267000] libata version 1.20 loaded. [4294673.269000] ata_piix 0000:00:1f.2: version 1.05 [4294673.269000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 58 [4294673.269000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4294673.269000] ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 58 [4294673.269000] ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 58 [4294673.423000] ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f [4294673.423000] ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48 [4294673.425000] ata1: dev 0 configured for UDMA/100 [4294673.425000] scsi0 : ata_piix [4294673.587000] ATA: abnormal status 0x7F on port 0x18C7 [4294673.587000] ata2: disabling port [4294673.587000] scsi1 : ata_piix [4294673.587000] Vendor: ATA Model: FUJITSU MHV2100B Rev: 0000 [4294673.587000] Type: Direct-Access ANSI SCSI revision: 05 [4294673.597000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [4294673.597000] SCSI device sda: drive cache: write back [4294673.601000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [4294673.601000] SCSI device sda: drive cache: write back [4294673.601000] sda: sda1 sda2 sda3 < sda5 > [4294673.705000] sd 0:0:0:0: Attached scsi disk sda [4294674.132000] usbcore: registered new driver usbfs [4294674.132000] usbcore: registered new driver hub [4294674.134000] USB Universal Host Controller Interface driver v2.3 [4294674.135000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66 [4294674.135000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294674.135000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294674.136000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294674.136000] uhci_hcd 0000:00:1d.0: irq 66, io base 0x00001800 [4294674.138000] hub 1-0:1.0: USB hub found [4294674.138000] hub 1-0:1.0: 2 ports detected [4294674.230000] ieee1394: Initialized config rom entry `ip1394' [4294674.239000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 [4294674.239000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294674.239000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294674.239000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294674.239000] uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001820 [4294674.239000] hub 2-0:1.0: USB hub found [4294674.239000] hub 2-0:1.0: 2 ports detected [4294674.340000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 [4294674.340000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294674.340000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [4294674.340000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294674.340000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840 [4294674.340000] hub 3-0:1.0: USB hub found [4294674.340000] hub 3-0:1.0: 2 ports detected [4294674.441000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 [4294674.441000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4294674.441000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [4294674.441000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [4294674.441000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860 [4294674.441000] hub 4-0:1.0: USB hub found [4294674.441000] hub 4-0:1.0: 2 ports detected [4294674.445000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [4294674.545000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 66 [4294674.545000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294674.545000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [4294674.545000] ehci_hcd 0000:00:1d.7: debug port 1 [4294674.545000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4294674.545000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [4294674.545000] ehci_hcd 0000:00:1d.7: irq 66, io mem 0xd2304000 [4294674.549000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294674.549000] hub 5-0:1.0: USB hub found [4294674.549000] hub 5-0:1.0: 8 ports detected [4294674.650000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org> [4294674.650000] PCI: Enabling device 0000:0a:03.1 (0000 -> 0002) [4294674.650000] ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 169 [4294674.701000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[d2006000-d20067ff] Max Packet=[2048] [4294674.967000] usb 1-2: device not accepting address 2, error -71 [4294675.432000] usb 5-2: new high speed USB device using ehci_hcd and address 2 [4294675.611000] Initializing USB Mass Storage driver... [4294675.957000] usb 5-6: new high speed USB device using ehci_hcd and address 4 [4294675.957000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301f94b6e] [4294676.137000] scsi2 : SCSI emulation for USB Mass Storage devices [4294676.137000] usb-storage: device found at 2 [4294676.137000] usb-storage: waiting for device to settle before scanning [4294676.137000] scsi3 : SCSI emulation for USB Mass Storage devices [4294676.138000] usb-storage: device found at 4 [4294676.138000] usb-storage: waiting for device to settle before scanning [4294676.138000] usbcore: registered new driver usb-storage [4294676.138000] USB Mass Storage support registered. [4294676.167000] ISO 9660 Extensions: Microsoft Joliet Level 3 [4294676.217000] ISO 9660 Extensions: RRIP_1991A [4294676.285000] loop: loaded (max 8 devices) [4294676.299000] Registering unionfs 1.1.2 [4294676.344000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [4294676.395000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher [4294676.528000] usbcore: registered new driver hiddev [4294676.556000] input: Genius 4D Scroll Mouse as /class/input/input1 [4294676.557000] input: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1d.1-1 [4294676.557000] usbcore: registered new driver usbhid [4294676.557000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294681.138000] Vendor: TOSHIBA Model: MK2004GAL Rev: JC10 [4294681.138000] Type: Direct-Access ANSI SCSI revision: 00 [4294681.139000] SCSI device sdb: 39063024 512-byte hdwr sectors (20000 MB) [4294681.139000] sdb: assuming drive cache: write through [4294681.140000] SCSI device sdb: 39063024 512-byte hdwr sectors (20000 MB) [4294681.140000] sdb: assuming drive cache: write through [4294681.140000] sdb:<5> Vendor: Sony Model: USB HS-CARD Rev: 4.52 [4294681.147000] Type: Direct-Access ANSI SCSI revision: 00 [4294681.204000] sd 3:0:0:0: Attached scsi removable disk sdc [4294681.204000] usb-storage: device scan complete [4294681.466000] sdb1 [4294681.466000] sd 2:0:0:0: Attached scsi disk sdb [4294681.467000] usb-storage: device scan complete [4294735.765000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI [4294735.765000] e100: Copyright(c) 1999-2005 Intel Corporation [4294735.765000] PCI: Enabling device 0000:0a:08.0 (0000 -> 0003) [4294735.765000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 74 [4294735.793000] e100: eth0: e100_probe: addr 0xd2005000, irq 74, MAC addr 00:13:A9:0E:16:F3 [4294748.238000] ts: Compaq touchscreen protocol output [4294748.693000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294748.693000] sd 3:0:0:0: Attached scsi generic sg1 type 0 [4294748.693000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [4294749.968000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294750.004000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294750.330000] NET: Registered protocol family 17 [4294751.095000] hw_random: RNG not detected [4294751.331000] Linux agpgart interface v0.101 (c) Dave Jones [4294751.343000] nvidia: module license 'NVIDIA' taints kernel. [4294751.347000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294751.347000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [4294751.347000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 [4294751.693000] input: PS/2 Mouse as /class/input/input2 [4294751.713000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [4294752.149000] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 169 [4294752.149000] Yenta: CardBus bridge found at 0000:0a:03.0 [104d:81ef] [4294752.271000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169 [4294752.271000] Socket status: 30000006 [4294752.271000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [4294752.271000] cs: IO port probe 0x6000-0x6fff: clean. [4294752.272000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [4294752.272000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff [4294753.198000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 82 [4294753.198000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [4294753.501000] cs: IO port probe 0x100-0x3af: clean. [4294753.504000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294753.505000] cs: IO port probe 0x820-0x8ff: clean. [4294753.505000] cs: IO port probe 0xc00-0xcf7: clean. [4294753.506000] cs: IO port probe 0xa00-0xaff: clean. [4294755.130000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294755.130000] md: bitmap version 4.39 [4294755.591000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [4294766.074000] ACPI: AC Adapter [ADP1] (on-line) [4294766.185000] ACPI: Battery Slot [BAT0] (battery present) [4294766.263000] ACPI: Power Button (FF) [PWRF] [4294766.263000] ACPI: Lid Switch [LID0] [4294766.263000] ACPI: Power Button (CM) [PWRB] [4294766.400000] ibm_acpi: ec object not found [4294766.462000] ACPI Sony Notebook Control Driver v0.2 successfully installed [4294766.551000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [4294784.000000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294784.000000] apm: overridden by ACPI. [4294793.573000] NET: Registered protocol family 10 [4294793.573000] lo: Disabled Privacy Extensions [4294793.573000] ADDRCONF(NETDEV_UP): eth0: link is not ready [4294793.573000] IPv6 over IPv4 tunneling driver [4294800.631000] input: Sony Vaio Jogdial as /class/input/input4 [4294800.631000] input: Sony Vaio Keys as /class/input/input5 [4294800.688000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 648) [4294800.734000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 659) [4294800.781000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 661) [4294800.827000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 648) [4294800.827000] sonypi: Sony Programmable I/O Controller Driverv1.26. [4294800.827000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [4294800.827000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [4294800.827000] sonypi: device allocated minor is 61 [4294807.615000] hda: drive_cmd: status=0x01 { Error } [4294807.615000] hda: drive_cmd: error=0x04 { AbortedCommand } [4294807.615000] ide: failed opcode was: 0xec [4294807.892000] hda: drive_cmd: status=0x01 { Error } [4294807.892000] hda: drive_cmd: error=0x04 { AbortedCommand } [4294807.892000] ide: failed opcode was: 0xec [4294811.943000] Bluetooth: Core ver 2.8 [4294811.943000] NET: Registered protocol family 31 [4294811.943000] Bluetooth: HCI device and connection manager initialized [4294811.943000] Bluetooth: HCI socket layer initialized [4294811.977000] Bluetooth: L2CAP ver 2.8 [4294811.977000] Bluetooth: L2CAP socket layer initialized [4294812.596000] Bluetooth: RFCOMM socket layer initialized [4294812.596000] Bluetooth: RFCOMM TTY layer initialized [4294812.596000] Bluetooth: RFCOMM ver 1.7 [4294814.630000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4295238.183000] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. [4295392.934000] hda: drive_cmd: status=0x01 { Error } [4295392.934000] hda: drive_cmd: error=0x04 { AbortedCommand } [4295392.934000] ide: failed opcode was: 0xec [4295393.021000] hda: drive_cmd: status=0x01 { Error } [4295393.021000] hda: drive_cmd: error=0x04 { AbortedCommand } [4295393.021000] ide: failed opcode was: 0xec

CategoryLaptop CategoryLaptop CategoryLaptop