DellPowerEdge1955
- Contact: ["Faulkes"]
Website: http://support.dell.com/support/edocs/systems/pe1955/en/index.htm
Tests Results
Hardy20080310Serverx86_64 - test using ubuntu-server-amd64.iso image from alpha6.
Results
Tester: Faulkes
Test |
Result |
LP Bug Number |
Installation |
Pass |
|
/proc/cpuinfo information |
Pass |
|
Dual Core support |
Pass |
|
RAM detection |
Pass |
|
RAID detection |
Not_Available |
|
Disks detection |
Pass |
|
Hot-swap |
Not_Available |
|
Serial console |
Pass |
|
Vga output |
Pass |
|
Network cards detection |
Pass |
|
Mouse |
Pass |
|
CD/DVD drive |
Pass |
|
Floppy |
Not_Available |
|
Parallel ports |
Not_Available |
|
NewPage(ServerTestingResultsTemplate,Add new result page,ServerTestingTeam/DellPowerEdge1955)
Hardware specification
Booting
/scripts/local-premount/resume:/scripts/local-premount/resume : 57 : log_begin_msg: not found
Memory
total used free shared buffers cached Mem: 4053984 133344 3920640 0 4608 81152 -/+ buffers/cache: 47584 4006400 Swap: 1485972 0 1485972
CPU Info
{{{ /proc/cpuinfo
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 2992.498 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall n x lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca lahf_lm bogomips : 5988.27 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 2992.498 cache size : 4096 KB physical id : 3 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall n x lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca lahf_lm bogomips : 5985.10 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 2992.498 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall n x lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca lahf_lm bogomips : 5985.10 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual
processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping : 6 cpu MHz : 2992.498 cache size : 4096 KB physical id : 3 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall n x lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca lahf_lm bogomips : 5985.09 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
}}}
Pci configuration
{{{ sudo lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev 92)
- Subsystem: Intel Corporation Unknown device [8086:8086]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 0 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee00000 Data: 0000
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME-
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev 92) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=08, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f2000000-f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee0f00c Data: 4151
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 2 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 92) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee0f00c Data: 4159
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 3 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME-
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 [8086:25e4] (rev 92) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee0f00c Data: 4161
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 4 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 1, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME-
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 92) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee0f00c Data: 4169
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 5 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 2, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME-
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 [8086:25e6] (rev 92) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee0f00c Data: 4171
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 6 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME-
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 92) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fc300000-fc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: fee0f00c Data: 4179
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 256 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 7 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME-
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 92)
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 92)
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 92)
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 92)
- Subsystem: Intel Corporation Unknown device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 92)
- Subsystem: Intel Corporation Unknown device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 92)
- Subsystem: Intel Corporation Unknown device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 92)
- Subsystem: Intel Corporation Unknown device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 Memory behind bridge: f8000000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x4 Root: Correctable- Non-Fatal- Fatal- PME-
- Address: fee0f00c Data: 4181
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at bce0 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at bcc0 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at fc600000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fc100000-fc2fffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
01:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=01, secondary=02, subordinate=02, sec-latency=64 Memory behind bridge: f8000000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <4us, L1 <16us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <4us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=01:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet [14e4:16ac] (rev 11)
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Capabilities: [40] PCI-X non-bridge device
- Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=02:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
- Address: 00000000fee07000 Data: 406a
03:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=04, subordinate=07, sec-latency=0 Memory behind bridge: f4000000-f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express Upstream Port IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: SlotPowerLimit 0.000000 Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=08, subordinate=08, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f3e00000-f3ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 256 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535
04:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=05, subordinate=06, sec-latency=0 Memory behind bridge: f4000000-f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4
- Address: 00000000fee0f00c Data: 4189
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0
- Address: 00000000fee0f00c Data: 4191
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=05, secondary=06, subordinate=06, sec-latency=64 Memory behind bridge: f4000000-f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [60] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <4us, L1 <16us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <4us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=05:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet [14e4:16ac] (rev 11)
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=32M] Capabilities: [40] PCI-X non-bridge device
- Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=06:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
- Address: 01c4000016c08c10 Data: 0000
08:05.0 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:107b] (rev 03)
- Subsystem: Dell Unknown device [1028:018a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at f3ee0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at ecc0 [size=64] Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
- Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=08:05.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
- Address: 0000000000000000 Data: 0000
08:05.1 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:107b] (rev 03)
- Subsystem: Dell Unknown device [1028:018a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 33 Region 0: Memory at f3ec0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at ec80 [size=64] Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
- Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=08:05.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
- Address: 0000000000000000 Data: 0000
0d:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fc400000-fc5fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 256 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4
- Address: 0000000000000000 Data: 0000
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz Status: Dev=0d:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535
0e:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0054] (rev 01)
- Subsystem: Dell SAS 5/iR Integrated RAID Controller [1028:1f08]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 192 Region 0: I/O ports at dc00 [disabled] [size=256] Region 1: Memory at fc4fc000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at fc4e0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at fc500000 [disabled] [size=1M] Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Address: 0000000000000000 Data: 0000
- Command: DPERE- ERO- RBC=512 OST=16 Status: Dev=0e:08.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=16 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
- Vector table: BAR=1 offset=00002000 PBA: BAR=1 offset=00003000
0f:0d.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
- Subsystem: Dell Unknown device [1028:01bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at cc00 [size=256] Region 2: Memory at fc1f0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fc100000 [disabled] [size=128K] Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
}}}
dmesg
{{{ from dmesg
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.24-11-server (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 21:55:55 UTC 2008 (Ubuntu 2.6.24-11.17-server) [ 0.000000] Command line: root=UUID=9fa1830b-ff68-46e0-914b-2b372295e80b ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851880) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F3610 checksum 0 [ 0.000000] ACPI: RSDP 000F3610, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 000F3690, 004C (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: FACP 000F3798, 00F4 (r3 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: DSDT CFFA8000, 23DA (r1 DELL PE_SC3 1 MSFT 100000E) [ 0.000000] ACPI: FACS CFFB7C00, 0040 [ 0.000000] ACPI: APIC 000F388C, 00D4 (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: SPCR 000F396D, 0050 (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: HPET 000F39BD, 0038 (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: MCFG 000F39F5, 003C (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 851880) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 160 [ 0.000000] 0: 256 -> 851880 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048392 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1326 pages reserved [ 0.000000] DMA zone: 2618 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833504 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 32-55 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec85000] gsi_base[192]) [ 0.000000] IOAPIC[2]: apic_id 10, address 0xfec85000, GSI 192-215 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffa8000 - 00000000cffb7000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffb7000 - 00000000cffb8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cffb8000 - 00000000d0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fe000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030042 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=9fa1830b-ff68-46e0-914b-2b372295e80b ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 49.273544] time.c: Detected 2992.498 MHz processor. [ 49.275759] Console: colour VGA+ 80x25 [ 49.275762] console [tty0] enabled [ 49.275775] Checking aperture... [ 49.275782] Calgary: detecting Calgary via BIOS EBDA area [ 49.275783] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 49.275785] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 49.305397] Placing software IO TLB between 0x1081000 - 0x5081000 [ 49.334767] Memory: 4046456k/4980736k available (2523k kernel code, 147112k reserved, 1328k data, 328k init) [ 49.334796] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 [ 49.483417] Calibrating delay using timer specific routine.. 5988.27 BogoMIPS (lpj=29941376) [ 49.483442] Security Framework initialized [ 49.483449] SELinux: Disabled at boot. [ 49.483459] AppArmor: AppArmor initialized [ 49.483462] Failure registering capabilities with primary security module. [ 49.483725] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 49.485670] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 49.486591] Mount-cache hash table entries: 256 [ 49.486710] Initializing cgroup subsys ns [ 49.486716] Initializing cgroup subsys cpuacct [ 49.486730] CPU: L1 I cache: 32K, L1 D cache: 32K [ 49.486731] CPU: L2 cache: 4096K [ 49.486733] CPU 0/0 -> Node 0 [ 49.486734] using mwait in idle threads. [ 49.486735] CPU: Physical Processor ID: 0 [ 49.486736] CPU: Processor Core ID: 0 [ 49.486741] CPU0: Thermal monitoring enabled (TM1) [ 49.486751] SMP alternatives: switching to UP code [ 49.487380] Early unpacking initramfs... done [ 49.708242] ACPI: Core revision 20070126 [ 49.708271] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 49.809536] Using local APIC timer interrupts. [ 49.842937] APIC timer calibration result 20781245 [ 49.842938] Detected 20.781 MHz APIC timer. [ 49.843009] SMP alternatives: switching to SMP code [ 49.843556] Booting processor 1/4 APIC 0x6 [ 49.853841] Initializing CPU#1 [ 50.002854] Calibrating delay using timer specific routine.. 5985.10 BogoMIPS (lpj=29925520) [ 50.002859] CPU: L1 I cache: 32K, L1 D cache: 32K [ 50.002860] CPU: L2 cache: 4096K [ 50.002862] CPU 1/6 -> Node 0 [ 50.002863] CPU: Physical Processor ID: 3 [ 50.002864] CPU: Processor Core ID: 0 [ 50.002868] CPU1: Thermal monitoring enabled (TM2) [ 50.003238] Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 [ 50.003301] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 50.023364] SMP alternatives: switching to SMP code [ 50.023675] Booting processor 2/4 APIC 0x1 [ 50.034013] Initializing CPU#2 [ 50.182754] Calibrating delay using timer specific routine.. 5985.10 BogoMIPS (lpj=29925522) [ 50.182760] CPU: L1 I cache: 32K, L1 D cache: 32K [ 50.182761] CPU: L2 cache: 4096K [ 50.182763] CPU 2/1 -> Node 0 [ 50.182764] CPU: Physical Processor ID: 0 [ 50.182764] CPU: Processor Core ID: 1 [ 50.182769] CPU2: Thermal monitoring enabled (TM2) [ 50.183139] Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 [ 50.183143] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 50.203226] SMP alternatives: switching to SMP code [ 50.203800] Booting processor 3/4 APIC 0x7 [ 50.214085] Initializing CPU#3 [ 50.362654] Calibrating delay using timer specific routine.. 5985.09 BogoMIPS (lpj=29925493) [ 50.362660] CPU: L1 I cache: 32K, L1 D cache: 32K [ 50.362661] CPU: L2 cache: 4096K [ 50.362663] CPU 3/7 -> Node 0 [ 50.362664] CPU: Physical Processor ID: 3 [ 50.362665] CPU: Processor Core ID: 1 [ 50.362669] CPU3: Thermal monitoring enabled (TM2) [ 50.363039] Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 [ 50.363069] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 50.383084] Brought up 4 CPUs [ 50.383169] CPU0 attaching sched-domain: [ 50.383171] domain 0: span 00000000,00000005 [ 50.383172] groups: 00000000,00000001 00000000,00000004 [ 50.383174] domain 1: span 00000000,0000000f [ 50.383175] groups: 00000000,00000005 00000000,0000000a [ 50.383177] domain 2: span 00000000,0000000f [ 50.383179] groups: 00000000,0000000f [ 50.383180] CPU1 attaching sched-domain: [ 50.383181] domain 0: span 00000000,0000000a [ 50.383182] groups: 00000000,00000002 00000000,00000008 [ 50.383184] domain 1: span 00000000,0000000f [ 50.383185] groups: 00000000,0000000a 00000000,00000005 [ 50.383187] domain 2: span 00000000,0000000f [ 50.383188] groups: 00000000,0000000f [ 50.383190] CPU2 attaching sched-domain: [ 50.383191] domain 0: span 00000000,00000005 [ 50.383192] groups: 00000000,00000004 00000000,00000001 [ 50.383194] domain 1: span 00000000,0000000f [ 50.383195] groups: 00000000,00000005 00000000,0000000a [ 50.383197] domain 2: span 00000000,0000000f [ 50.383198] groups: 00000000,0000000f [ 50.383199] CPU3 attaching sched-domain: [ 50.383200] domain 0: span 00000000,0000000a [ 50.383201] groups: 00000000,00000008 00000000,00000002 [ 50.383203] domain 1: span 00000000,0000000f [ 50.383204] groups: 00000000,0000000a 00000000,00000005 [ 50.383206] domain 2: span 00000000,0000000f [ 50.383207] groups: 00000000,0000000f [ 50.383539] net_namespace: 120 bytes [ 50.383835] Time: 8:49:44 Date: 03/10/08 [ 50.383878] NET: Registered protocol family 16 [ 50.384028] ACPI: bus type pci registered [ 50.384083] PCI: Using configuration type 1 [ 50.384783] ACPI: EC: Look up EC in DSDT [ 50.386267] ACPI: Interpreter enabled [ 50.386269] ACPI: (supports S0 S4 S5) [ 50.386275] ACPI: Using IOAPIC for interrupt routing [ 50.389702] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 50.409534] PCI: PXH quirk detected, disabling MSI for SHPC device [ 50.410025] PCI: Transparent bridge - 0000:00:1e.0 [ 50.410053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 50.410409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 50.410508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] [ 50.410573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] [ 50.410670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] [ 50.410769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.PE2X._PRT] [ 50.410833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 50.410927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 50.411026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 50.411124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 50.411222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.PE2P._PRT] [ 50.411286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] [ 50.411383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] [ 50.413133] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) [ 50.413196] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12) [ 50.413255] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 50.413315] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 *7 10 11 12) [ 50.413374] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 11 12) *14 [ 50.413433] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 12) *15 [ 50.413491] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 50.413549] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 50.413627] Linux Plug and Play Support v0.97 (c) Adam Belay [ 50.413648] pnp: PnP ACPI init [ 50.413652] ACPI: bus type pnp registered [ 50.416593] pnp: PnP ACPI: found 11 devices [ 50.416595] ACPI: ACPI bus type pnp unregistered [ 50.416775] PCI: Using ACPI for IRQ routing [ 50.416777] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 50.493200] NET: Registered protocol family 8 [ 50.493202] NET: Registered protocol family 20 [ 50.493228] NetLabel: Initializing [ 50.493229] NetLabel: domain hash size = 128 [ 50.493230] NetLabel: protocols = UNLABELED CIPSOv4 [ 50.493242] NetLabel: unlabeled traffic allowed by default [ 50.493251] PCI-GART: No AMD northbridge found. [ 50.493255] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 50.493258] hpet0: 3 64-bit timers, 14318180 Hz [ 50.494291] AppArmor: AppArmor Filesystem Enabled [ 50.502770] Time: tsc clocksource has been installed. [ 50.502778] Switched to high resolution mode on CPU 0 [ 50.503207] Switched to high resolution mode on CPU 2 [ 50.503481] Switched to high resolution mode on CPU 3 [ 50.503894] Switched to high resolution mode on CPU 1 [ 50.534074] system 00:07: ioport range 0x800-0x87f has been reserved [ 50.534077] system 00:07: ioport range 0x880-0x8bf has been reserved [ 50.534079] system 00:07: ioport range 0x8c0-0x8df has been reserved [ 50.534082] system 00:07: ioport range 0x8e0-0x8e3 has been reserved [ 50.534084] system 00:07: ioport range 0xc00-0xc7f has been reserved [ 50.534086] system 00:07: ioport range 0xca0-0xca7 has been reserved [ 50.534088] system 00:07: ioport range 0xca9-0xcab has been reserved [ 50.534091] system 00:07: ioport range 0xcad-0xcaf has been reserved [ 50.534093] system 00:07: ioport range 0x2f8-0x2ff has been reserved [ 50.534098] system 00:08: ioport range 0xca8-0xca8 has been reserved [ 50.534100] system 00:08: ioport range 0xcac-0xcac has been reserved [ 50.534105] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved [ 50.534683] PCI: Bridge: 0000:05:00.0 [ 50.534684] IO window: disabled. [ 50.534806] MEM window: f4000000-f7ffffff [ 50.534898] PREFETCH window: disabled. [ 50.535035] PCI: Bridge: 0000:04:00.0 [ 50.535036] IO window: disabled. [ 50.535127] MEM window: f4000000-f7ffffff [ 50.535173] PREFETCH window: disabled. [ 50.535264] PCI: Bridge: 0000:04:01.0 [ 50.535265] IO window: disabled. [ 50.535356] MEM window: disabled. [ 50.535403] PREFETCH window: disabled. [ 50.535494] PCI: Bridge: 0000:03:00.0 [ 50.535495] IO window: disabled. [ 50.535586] MEM window: f4000000-f7ffffff [ 50.535632] PREFETCH window: disabled. [ 50.535724] PCI: Bridge: 0000:03:00.3 [ 50.535769] IO window: e000-efff [ 50.535861] MEM window: f3e00000-f3ffffff [ 50.535908] PREFETCH window: disabled. [ 50.535999] PCI: Bridge: 0000:00:02.0 [ 50.536000] IO window: e000-efff [ 50.536002] MEM window: f2000000-f7ffffff [ 50.536004] PREFETCH window: disabled. [ 50.536006] PCI: Bridge: 0000:00:03.0 [ 50.536007] IO window: disabled. [ 50.536009] MEM window: disabled. [ 50.536010] PREFETCH window: disabled. [ 50.536013] PCI: Bridge: 0000:00:04.0 [ 50.536013] IO window: disabled. [ 50.536015] MEM window: disabled. [ 50.536017] PREFETCH window: disabled. [ 50.536019] PCI: Bridge: 0000:00:05.0 [ 50.536020] IO window: disabled. [ 50.536022] MEM window: disabled. [ 50.536024] PREFETCH window: disabled. [ 50.536026] PCI: Bridge: 0000:00:06.0 [ 50.536026] IO window: disabled. [ 50.536029] MEM window: disabled. [ 50.536030] PREFETCH window: disabled. [ 50.536033] PCI: Bridge: 0000:0d:00.0 [ 50.536034] IO window: d000-dfff [ 50.536037] MEM window: fc400000-fc5fffff [ 50.536039] PREFETCH window: disabled. [ 50.536042] PCI: Bridge: 0000:00:07.0 [ 50.536043] IO window: d000-dfff [ 50.536045] MEM window: fc300000-fc5fffff [ 50.536047] PREFETCH window: disabled. [ 50.536049] PCI: Bridge: 0000:01:00.0 [ 50.536050] IO window: disabled. [ 50.536054] MEM window: f8000000-fbffffff [ 50.536057] PREFETCH window: disabled. [ 50.536061] PCI: Bridge: 0000:00:1c.0 [ 50.536062] IO window: disabled. [ 50.536065] MEM window: f8000000-fbffffff [ 50.536067] PREFETCH window: disabled. [ 50.536072] PCI: Bridge: 0000:00:1e.0 [ 50.536074] IO window: c000-cfff [ 50.536077] MEM window: fc100000-fc2fffff [ 50.536079] PREFETCH window: d8000000-dfffffff [ 50.536091] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.536095] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 50.536320] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.536367] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 50.536687] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.536734] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 50.537330] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 50.537651] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.537697] PCI: Setting latency timer of device 0000:04:01.0 to 64 [ 50.538018] PCI: Setting latency timer of device 0000:03:00.3 to 64 [ 50.538068] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.538070] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 50.538075] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.538078] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 50.538083] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.538086] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 50.538091] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.538094] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 50.538099] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.538101] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 50.538112] PCI: Setting latency timer of device 0000:0d:00.0 to 64 [ 50.538125] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 50.538128] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 50.538144] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 50.538152] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 50.538159] NET: Registered protocol family 2 [ 50.644175] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 50.645081] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 50.648524] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 50.648980] TCP: Hash tables configured (established 524288 bind 65536) [ 50.648981] TCP reno registered [ 50.674163] checking if image is initramfs... it is [ 51.105673] Freeing initrd memory: 7198k freed [ 51.110035] audit: initializing netlink socket (disabled) [ 51.110051] audit(1205138984.781:1): initialized [ 51.110511] Total HugeTLB memory allocated, 0 [ 51.112994] VFS: Disk quotas dquot_6.5.1 [ 51.113067] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 51.113250] io scheduler noop registered [ 51.113251] io scheduler anticipatory registered [ 51.113252] io scheduler deadline registered (default) [ 51.113362] io scheduler cfq registered [ 51.115202] Boot video device is 0000:0f:0d.0 [ 51.115394] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 51.115421] assign_interrupt_mode Found MSI capability [ 51.115445] Allocate Port Service[0000:00:02.0:pcie00] [ 51.115535] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 51.115561] assign_interrupt_mode Found MSI capability [ 51.115582] Allocate Port Service[0000:00:03.0:pcie00] [ 51.115655] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 51.115681] assign_interrupt_mode Found MSI capability [ 51.115702] Allocate Port Service[0000:00:04.0:pcie00] [ 51.115774] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 51.115801] assign_interrupt_mode Found MSI capability [ 51.115906] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 51.115932] assign_interrupt_mode Found MSI capability [ 51.115952] Allocate Port Service[0000:00:06.0:pcie00] [ 51.116039] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 51.116065] assign_interrupt_mode Found MSI capability [ 51.116086] Allocate Port Service[0000:00:07.0:pcie00] [ 51.116178] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 51.116213] assign_interrupt_mode Found MSI capability [ 51.116241] Allocate Port Service[0000:00:1c.0:pcie00] [ 51.116502] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 51.117283] Allocate Port Service[0000:03:00.0:pcie10] [ 51.118659] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 51.119530] assign_interrupt_mode Found MSI capability [ 51.120265] Allocate Port Service[0000:04:00.0:pcie20] [ 51.121596] PCI: Setting latency timer of device 0000:04:01.0 to 64 [ 51.122421] assign_interrupt_mode Found MSI capability [ 51.123156] Allocate Port Service[0000:04:01.0:pcie20] [ 51.153047] Real Time Clock Driver v1.12ac [ 51.153246] hpet_resources: 0xfed00000 is busy [ 51.153261] Linux agpgart interface v0.102 [ 51.153263] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 51.154637] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 51.154702] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 51.154826] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 51.157432] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 51.157435] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 51.194358] mice: PS/2 mouse device common for all mice [ 51.194406] cpuidle: using governor ladder [ 51.194408] cpuidle: using governor menu [ 51.194582] NET: Registered protocol family 1 [ 51.194654] registered taskstats version 1 [ 51.194761] Magic number: 0:366:826 [ 51.194793] hash matches device ptyt6 [ 51.194816] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 51.194819] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 51.195092] Freeing unused kernel memory: 328k freed [ 51.225706] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 51.289943] fuse init (API version 7.9) [ 51.296734] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 51.296743] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 51.296750] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 51.296757] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 51.438711] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 51.438714] Copyright (c) 1999-2006 Intel Corporation. [ 51.439039] ACPI: PCI Interrupt 0000:08:05.0[A] -> GSI 32 (level, low) -> IRQ 32 [ 51.456930] usbcore: registered new interface driver usbfs [ 51.456947] usbcore: registered new interface driver hub [ 51.457182] SCSI subsystem initialized [ 51.458068] usbcore: registered new device driver usb [ 51.459104] Fusion MPT base driver 3.04.06 [ 51.459106] Copyright (c) 1999-2007 LSI Corporation [ 51.461123] Fusion MPT SAS Host driver 3.04.06 [ 51.462534] USB Universal Host Controller Interface driver v3.0 [ 51.730344] e1000: 0000:08:05.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:22:ff:34:50 [ 51.833550] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 51.833860] ACPI: PCI Interrupt 0000:08:05.1[B] -> GSI 33 (level, low) -> IRQ 33 [ 52.130059] e1000: 0000:08:05.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:22:ff:34:51 [ 52.232028] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 52.232289] ACPI: PCI Interrupt 0000:0e:08.0[A] -> GSI 192 (level, low) -> IRQ 192 [ 52.232299] mptbase: ioc0: Initiating bringup [ 52.232459] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007) [ 52.232831] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 52.233743] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 52.233761] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 52.233764] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 52.233995] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 52.234021] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000bce0 [ 52.234128] usb usb1: configuration #1 chosen from 1 choice [ 52.234144] hub 1-0:1.0: USB hub found [ 52.234148] hub 1-0:1.0: 2 ports detected [ 52.342476] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 52.342484] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 52.342487] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 52.342507] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 52.342530] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bcc0 [ 52.342629] usb usb2: configuration #1 chosen from 1 choice [ 52.342646] hub 2-0:1.0: USB hub found [ 52.342671] hub 2-0:1.0: 2 ports detected [ 52.452408] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 [ 52.453109] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 52.453115] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 52.453177] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 52.457086] ehci_hcd 0000:00:1d.7: debug port 1 [ 52.457090] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 52.457095] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600000 [ 52.473570] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 52.473673] usb usb3: configuration #1 chosen from 1 choice [ 52.473696] hub 3-0:1.0: USB hub found [ 52.473702] hub 3-0:1.0: 4 ports detected [ 52.831726] eth2: Broadcom NetXtreme II BCM5708 1000Base-SX (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:15:c5:e4:17:93 [ 53.182544] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 53.363508] usb 1-2: configuration #1 chosen from 1 choice [ 53.772207] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 56.213132] scsi0 : ioc0: LSISAS1068 B0, FwRev=00063200h, Ports=1, MaxQ=511, IRQ=192 [ 56.222220] scsi 0:0:0:0: Direct-Access FUJITSU MAY2036RC D108 PQ: 0 ANSI: 3 [ 56.225555] scsi 0:0:1:0: Direct-Access FUJITSU MAY2036RC D108 PQ: 0 ANSI: 3 [ 56.228495] scsi 0:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5 [ 56.228568] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 56.233875] Driver 'sd' needs updating - please use bus_type methods [ 56.234233] sd 0:1:0:0: [sda] 70311936 512-byte hardware sectors (36000 MB) [ 56.234445] sd 0:1:0:0: [sda] Write Protect is off [ 56.234448] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08 [ 56.234824] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 56.235154] sd 0:1:0:0: [sda] 70311936 512-byte hardware sectors (36000 MB) [ 56.235349] sd 0:1:0:0: [sda] Write Protect is off [ 56.235350] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08 [ 56.235712] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 56.235715] sda: sda1 sda2 < sda5 > [ 56.255023] sd 0:1:0:0: [sda] Attached SCSI disk [ 56.257635] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 56.257655] scsi 0:0:1:0: Attached scsi generic sg1 type 0 [ 56.257675] sd 0:1:0:0: Attached scsi generic sg2 type 0 [ 56.820741] eth3: Broadcom NetXtreme II BCM5708 1000Base-SX (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:15:c5:e4:17:91 [ 56.843313] usbcore: registered new interface driver libusual [ 56.845547] Initializing USB Mass Storage driver... [ 56.845618] scsi1 : SCSI emulation for USB Mass Storage devices [ 56.845656] usb-storage: device found at 2 [ 56.845657] usb-storage: waiting for device to settle before scanning [ 56.845691] scsi2 : SCSI emulation for USB Mass Storage devices [ 56.845724] usb-storage: device found at 2 [ 56.845725] usb-storage: waiting for device to settle before scanning [ 56.845731] usbcore: registered new interface driver usb-storage [ 56.845733] USB Mass Storage support registered. [ 61.457972] kjournald starting. Commit interval 5 seconds [ 61.457980] EXT3-fs: mounted filesystem with ordered data mode. [ 61.847791] usb-storage: device scan complete [ 61.848778] usb-storage: device scan complete [ 61.854772] scsi 1:0:0:0: Direct-Access Avocent Virtual Floppy 1.00 PQ: 0 ANSI: 0 CCS [ 61.854776] scsi 2:0:0:0: CD-ROM Avocent Virtual CD/DVD 1.00 PQ: 0 ANSI: 0 CCS [ 61.864790] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 61.864822] sd 1:0:0:0: Attached scsi generic sg3 type 0 [ 61.864895] scsi 2:0:0:0: Attached scsi generic sg4 type 5 [ 63.165880] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 63.220138] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 63.265863] iTCO_vendor_support: vendor-support=0 [ 63.266972] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 63.267029] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860) [ 63.267055] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 63.272564] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 63.365208] EDAC MC: Ver: 2.1.0 Feb 29 2008 [ 63.366810] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 63.366824] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 63.368667] input: Power Button (FF) as /devices/virtual/input/input3 [ 63.370015] intel_rng: FWH not detected [ 63.527332] Driver 'sr' needs updating - please use bus_type methods [ 63.536007] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 63.594075] sr0: scsi-1 drive [ 63.594079] Uniform CD-ROM driver Revision: 3.20 [ 63.594117] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 63.696879] ACPI: Power Button (FF) [PWRF] [ 63.775808] NET: Registered protocol family 10 [ 63.776034] lo: Disabled Privacy Extensions [ 63.876096] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 64.017903] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 64.693961] loop: module loaded [ 64.718814] lp: driver loaded but no devices found [ 64.855826] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 65.061562] EXT3 FS on sda1, internal journal [ 65.466923] ip_tables: (C) 2000-2006 Netfilter Core Team [ 74.259308] eth0: no IPv6 routers present
}}}
Network
{{{ dmesg | grep eth + ifconfig -a
[ 51.833550] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 52.232028] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 52.831726] eth2: Broadcom NetXtreme II BCM5708 1000Base-SX (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:15:c5:e4:17:93 [ 56.233875] Driver 'sd' needs updating - please use bus_type methods [ 56.820741] eth3: Broadcom NetXtreme II BCM5708 1000Base-SX (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:15:c5:e4:17:91 [ 63.527332] Driver 'sr' needs updating - please use bus_type methods [ 63.536007] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 74.259308] eth0: no IPv6 routers present
eth0 Link encap:Ethernet HWaddr 00:14:22:ff:34:50
inet addr:172.28.20.111 Bcast:172.28.20.255 Mask:255.255.255.0 inet6 addr: fe80::214:22ff:feff:3450/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8567 errors:0 dropped:0 overruns:0 frame:0 TX packets:5506 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8099783 (7.7 MB) TX bytes:788983 (770.4 KB) Base address:0xecc0 Memory:f3ee0000-f3f00000
eth1 Link encap:Ethernet HWaddr 00:14:22:ff:34:51
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0
TX bytes:0 (0.0 Base address:0xec80 Memory:f3ec0000-f3ee0000
eth2 Link encap:Ethernet HWaddr 00:15:c5:e4:17:93
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0
TX bytes:0 (0.0 Interrupt:16 Memory:f4000000-f4012100
eth3 Link encap:Ethernet HWaddr 00:15:c5:e4:17:91
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0
TX bytes:0 (0.0 Interrupt:16 Memory:f8000000-f8012100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3606 (3.5 KB) TX bytes:3606 (3.5 KB)
}}}