SpecSpec

Differences between revisions 6 and 20 (spanning 14 versions)
Revision 6 as of 2005-10-28 21:03:10
Size: 2906
Editor: 203_220_103_66-WIFI_HOTSPOTS
Comment: starting to reformat these
Revision 20 as of 2008-08-06 16:31:19
Size: 6134
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
 * '''Launchpad Entry''': https://launchpad.net/distros/ubuntu/+spec/foo
 * '''Created''': [[Date(2005-10-25T15:45:54Z)]] by MatthewEast
 * '''Contributors''': MatthewEast
 * '''Launchpad Entry''': UbuntuSpec:foo
 * '''Created''': <<Date(2005-10-25T15:45:54Z)>>
 * '''Contributors''':
Line 5: Line 5:
 * '''See also''': SpecTemplate
Line 8: Line 9:

This specification decribes the way we would like Ubuntu specifications to be written. It takes the form of a specification itself.


The better your spec, the better the chances that your ideas will clearly understood by the review team.

See also SpecTemplate, which is recommended as a template for your own specifications in this system.
This specification describes the way we would like Ubuntu specifications to be written. It takes the form of a specification itself.
Line 18: Line 13:
As we develop new ideas for features in Ubuntu it's important to have a
clear idea of the exact status of each idea. Putting this content in the
wiki gives our community a chance to participate in the discussion and
design of a feature, and increases the chance that community members will
feel confident enough to start work on the implementation of the feature. A
good specification allows community members who were not physically present
at meetings discussing a topic to participate in the implementation of the
spec.
As we develop new ideas for features in Ubuntu, it's important to be able to communicate them clearly. This serves the purpose of making it clear what the feature is about, and allowing people to evolve an implementation strategy for it.

Publishing this content gives our community a chance to participate in the discussion and design of a feature, and increases the chance that community members will feel confident enough to start work on the implementation of the feature.

A good specification also allows community members who were not physically present at meetings discussing a topic to participate in the implementation of the spec.

Bottom line: the better your spec, the better the chances that your ideas will be clearly understood by the review team.
Line 29: Line 23:
  * Bob is the maintainer for the boot process for Ubuntu. In the Dapper cycle, he would like to work on getting the boot time down to two seconds from boot manager to GDM screen. He creates an entry for the specification in Launchpad, proposes it for the UBZ sprint, and starts writing out a braindump of it in the Ubuntu wiki. Magnus, who is in charge of UBZ scheduling, thinks it sounds fishy but approves it to make sure that the change is discussed and documented properly. He marks it as priority Medium because he isn't sure Bob will have time free for implementing it during Dapper.

  * Pedro works on Malone, in Launchpad. Before UBZ, he remembers that the dependency handling in the bug tracker is really not optimal. He writes out a Summary and Rationale in a Launchpad wiki page, registers it as a specification in Launchpad, and suggests it for UBZ. Monica, Launchpad manageress, thinks that this is really not the time to be talking about it and rejects the application for UBZ. He then indicates it for the next conference, UBB, and marks its priority is Low.

  * Jason is an Ubuntu and Rosetta user. He has noticed that changes made to translations are making their way into language packs but not to the upstream versions, and adds a specification that describes a way for getting upstream to use language packs. Monica also has a plan for this but hadn't described it in a spec, so she adds it to the UBZ spec list, and adds Carlos, Rosetta maintainer, as drafter for it.
Line 30: Line 30:

This specification covers feature specifications for Ubuntu and Launchpad. It is not meant as a more general specification format.
Line 33: Line 35:
The spec is broken into a number of sections and sub-sections. We describe
each of these in turn:
A specification should be built with the following considerations:
Line 36: Line 37:
  1. '''The title'''. A short heading for the spec, no more than 12 words.   * The person implementing it may not be the person writing it. It should be clear enough for someone to be able to read it and have a clear path towards implementing it. If it doesn't, it needs more detail.
Line 38: Line 39:
  1. '''The status metadata'''. This section contains some well-defined
     metadata for the spec. It's important to put in as may flags and tags
     as possible that accurately describe the state and scope of the
     specification. These flags are used to generate reporting pages
     automatically. Please use as many flags as make sense for this spec
     from the following list: HighPriority, LowPriority, MediumPriority,
     UduBof, UbzSpecification, BrainDump, DraftSpecification, ApprovedSpecification,
     ImplementedSpecification, DistroSpecification, LaunchpadSpecification,
     CommunitySpecification, UbuntuTrack, KubuntuTrack, EdubuntuTrack, LaunchpadTrack.
  * That the use cases covered in the specification should be practical situations, not contrived issues.
Line 48: Line 41:
  1. '''Introduction'''. A brief introduction to the topic or spec. This
     should not attempt to tell '''why''' the spec is being defined, just
     '''what''' is being specified.
  * Limitations and issues discovered during the creation of a specification should be clearly pointed out so that they can be dealt with explicitly.
Line 52: Line 43:
  1. '''Rationale''': a summary of '''why''' this spec is being defined.
  
  1. '''Scope and Use Cases'''. The use cases are not always required, but
     in many cases they bring much better clarity to the scope and scale of
     the specification than could be obtained by talking in abstract terms.
  * If you don't know enough to be able to competently write a spec, you should either get help or research the problem further. Avoid spending time making up a solution: base yourself on your peers' opinions and prior work.
Line 58: Line 45:
  1. '''Implementation Plan'''. This section is usually broken down into
     subsections, such as the packages being affected, data and system
     migration where necessary, user interface requirements and pictures
     (photographs of drawings on paper work ell).
  * Specifications should be written in clear, concise and correct English. If you're not a native speaker, co-editing the spec with somebody who is might be a good idea.
Line 63: Line 47:
Specific issues related to particular sections are described further below.

=== Summary ===

The summary should not attempt to say '''why''' the spec is being defined, just '''what''' is being specified.

=== Rationale ===

This should be the description of '''why''' this spec is being defined.

=== Scope and Use Cases ===

While not always required, but in many cases they bring much better clarity to the scope and scale of the specification than could be obtained by talking in abstract terms.

==== Use Cases ====

Use cases are positive statements which (loosely) conform to a pattern like

  * A person and their role
  * The objective they want to achieve
  * The steps they go through
  * The positive result

Specifically, describing the current unsatisfactory state of affairs is not a use case; that belongs in the Rationale section.

=== Implementation Plan ===

This section is usually broken down into subsections, such as the packages being affected, data and system migration where necessary, user interface requirements and pictures (photographs of drawings on paper work well).
Line 66: Line 78:
To implement a specification, the assignee should observe the use cases carefully, and follow the design specified. He should make note of places in which he has strayed from the design section, adding rationale describing why this happened. This is important so that next iterations of this specification (and new specifications that touch upon this subject) can use the specification as a reference.

The implementation is very dependent on the type of feature to be implemented. Refer to the team leader for further suggestions and guidance on this topic.
Line 68: Line 84:
The specification process requires experienced people to drive it. More documentation on the process should be produced.

The drafting of a specification requires English skills and a very good understanding of the problem. It must also describe things to an extent that someone else could implement. This is a difficult set of conditions to ensure throughout all the specifications added.

There is a lot of difficulty in gardening obsolete, unwanted and abandoned specifications in the Wiki.
Line 69: Line 91:

We'll have a first public session on this on the first Monday in UBZ.
----
CategorySpec
  • Launchpad Entry: foo

  • Created: 2005-10-25

  • Contributors:

  • Packages affected:

  • See also: SpecTemplate

Summary

This specification describes the way we would like Ubuntu specifications to be written. It takes the form of a specification itself.

Rationale

As we develop new ideas for features in Ubuntu, it's important to be able to communicate them clearly. This serves the purpose of making it clear what the feature is about, and allowing people to evolve an implementation strategy for it.

Publishing this content gives our community a chance to participate in the discussion and design of a feature, and increases the chance that community members will feel confident enough to start work on the implementation of the feature.

A good specification also allows community members who were not physically present at meetings discussing a topic to participate in the implementation of the spec.

Bottom line: the better your spec, the better the chances that your ideas will be clearly understood by the review team.

Use Cases

  • Bob is the maintainer for the boot process for Ubuntu. In the Dapper cycle, he would like to work on getting the boot time down to two seconds from boot manager to GDM screen. He creates an entry for the specification in Launchpad, proposes it for the UBZ sprint, and starts writing out a braindump of it in the Ubuntu wiki. Magnus, who is in charge of UBZ scheduling, thinks it sounds fishy but approves it to make sure that the change is discussed and documented properly. He marks it as priority Medium because he isn't sure Bob will have time free for implementing it during Dapper.
  • Pedro works on Malone, in Launchpad. Before UBZ, he remembers that the dependency handling in the bug tracker is really not optimal. He writes out a Summary and Rationale in a Launchpad wiki page, registers it as a specification in Launchpad, and suggests it for UBZ. Monica, Launchpad manageress, thinks that this is really not the time to be talking about it and rejects the application for UBZ. He then indicates it for the next conference, UBB, and marks its priority is Low.
  • Jason is an Ubuntu and Rosetta user. He has noticed that changes made to translations are making their way into language packs but not to the upstream versions, and adds a specification that describes a way for getting upstream to use language packs. Monica also has a plan for this but hadn't described it in a spec, so she adds it to the UBZ spec list, and adds Carlos, Rosetta maintainer, as drafter for it.

Scope

This specification covers feature specifications for Ubuntu and Launchpad. It is not meant as a more general specification format.

Design

A specification should be built with the following considerations:

  • The person implementing it may not be the person writing it. It should be clear enough for someone to be able to read it and have a clear path towards implementing it. If it doesn't, it needs more detail.
  • That the use cases covered in the specification should be practical situations, not contrived issues.
  • Limitations and issues discovered during the creation of a specification should be clearly pointed out so that they can be dealt with explicitly.
  • If you don't know enough to be able to competently write a spec, you should either get help or research the problem further. Avoid spending time making up a solution: base yourself on your peers' opinions and prior work.
  • Specifications should be written in clear, concise and correct English. If you're not a native speaker, co-editing the spec with somebody who is might be a good idea.

Specific issues related to particular sections are described further below.

Summary

The summary should not attempt to say why the spec is being defined, just what is being specified.

Rationale

This should be the description of why this spec is being defined.

Scope and Use Cases

While not always required, but in many cases they bring much better clarity to the scope and scale of the specification than could be obtained by talking in abstract terms.

Use Cases

Use cases are positive statements which (loosely) conform to a pattern like

  • A person and their role
  • The objective they want to achieve
  • The steps they go through
  • The positive result

Specifically, describing the current unsatisfactory state of affairs is not a use case; that belongs in the Rationale section.

Implementation Plan

This section is usually broken down into subsections, such as the packages being affected, data and system migration where necessary, user interface requirements and pictures (photographs of drawings on paper work well).

Implementation

To implement a specification, the assignee should observe the use cases carefully, and follow the design specified. He should make note of places in which he has strayed from the design section, adding rationale describing why this happened. This is important so that next iterations of this specification (and new specifications that touch upon this subject) can use the specification as a reference.

The implementation is very dependent on the type of feature to be implemented. Refer to the team leader for further suggestions and guidance on this topic.

Outstanding Issues

The specification process requires experienced people to drive it. More documentation on the process should be produced.

The drafting of a specification requires English skills and a very good understanding of the problem. It must also describe things to an extent that someone else could implement. This is a difficult set of conditions to ensure throughout all the specifications added.

There is a lot of difficulty in gardening obsolete, unwanted and abandoned specifications in the Wiki.

BoF agenda and discussion

We'll have a first public session on this on the first Monday in UBZ.


CategorySpec

SpecSpec (last edited 2010-05-30 17:13:07 by dsl-185-83-10)