Edubuntu wiring suggestions

The default install without internet connection

attachment:ltsp_default.png

The above picture shows a typical network setup for a single classroom without internet connection. If you follow the [http://wiki.edubuntu.org/EdubuntuInstallNotes install notes] and especially the [http://wiki.edubuntu.org/LTSPServerSetup server setup procedure] this install will be the fastest and easiest.

A setup with internet connection

attachment:ltsp_inet1.png

This is the same wiring with internet access, you need to put the right router IP in your /etc/ltsp/dhcpd.conf (as outlined in the [http://wiki.edubuntu.org/LTSPServerSetup server setup] doc) for the thin clients.

A setup with two network cards in the server

attachment:ltsp_inet2.png

You can also route your traffic through the server as shown above if you have two network cards. This setup makes sense if you want to run a proxy server on the server machine or simply want to separate your thin client network completely from the rest of your network. Additionally to the normal [http://wiki.edubuntu.org/LTSPServerSetup server setup] doc, you should also look at the [http://wiki.edubuntu.org/ThinClientHowtoNAT NAT Howto] to see how to setup the routing on the server.

CategoryDocumentation CategoryCleanup