LTSPWiring
Differences between revisions 7 and 9 (spanning 2 versions)
1429
Comment: cat doc
|
← Revision 9 as of 2008-08-06 16:15:59 ⇥
65
converted to 1.6 markup
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
## page was renamed from EdubuntuLtspWiring = Ubuntu wiring suggestions = == The default install without internet connection == attachment:ltsp_default.png The above picture shows a typical network setup for a single classroom without internet connection. If you follow the [http://wiki.edubuntu.org/EdubuntuInstallNotes install notes] and especially the [http://wiki.edubuntu.org/LTSPServerSetup server setup procedure] this install will be the fastest and easiest. == A setup with internet connection == attachment:ltsp_inet1.png This is the same wiring with internet access, you need to put the right router IP in your /etc/ltsp/dhcpd.conf (as outlined in the [http://wiki.edubuntu.org/LTSPServerSetup server setup] doc) for the thin clients. And make sure there is no dhcp server running on the router. == A setup with two network cards in the server == attachment:ltsp_inet2.png You can also route your traffic through the server as shown above if you have two network cards. This setup makes sense if you want to run a proxy server on the server machine or simply want to separate your thin client network completely from the rest of your network. Additionally to the normal [http://wiki.edubuntu.org/LTSPServerSetup server setup] doc, you should also look at the [http://wiki.edubuntu.org/ThinClientHowtoNAT NAT Howto] to see how to setup the routing on the server. ---- CategoryDocumentation |
#REFRESH 0 http://help.ubuntu.com/community/UbuntuLTSP/LTSPWiring |
UbuntuLTSP/LTSPWiring (last edited 2008-08-06 16:15:59 by localhost)