seiflotfy

Differences between revisions 3 and 10 (spanning 7 versions)
⇤ ← Revision 3 as of 2006-11-12 13:09:11 →
Size: 1539
Editor: p50877A40
Comment:
← Revision 10 as of 2007-05-08 22:02:16 → ⇥
Size: 2151
Editor: P5118
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
''''About me''''

My name is Seif Lotfy and I'm form Cairo/Egypt. I am 22 and studying Computational Engineering at TU-Darmstadt (Germany).
I have been using Ubuntu since October 2004 when it was released. (I also orderd soem CDs to test if i would actually get them).
I am really into robots too and i have been participatign with the GermanTeam at the RoboCup since 2006. I also like programing GUIs alot.
blablablablablabla ...........


''''Contact''''

if u want to contact me :
E-Mail: seif@lotfy.com
MSN: xeifer@hotmail.com
ICQ: 21815774
Yahoo: seiflotfy
AOL: seiflotfy



''''Howto's''''
Line 5: Line 26:
Line 9: Line 31:
{{{lspci}}}  {{{lspci
}}}
Line 11: Line 34:
{{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)  {{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
Line 17: Line 40:
first make sure you have the packacges required for the configuration of the Card
open a console and type:
{{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils}}		 first make sure you have the packacges required for the configuration of the card, open a console and type:
 {{{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils
}}}
Line 22: Line 45:
{{{cd /opt/
hg clone http://linuxtv.org/hg/v4l-dvb||		  {{{cd /opt/
hg clone http://linuxtv.org/hg/v4l-dvb
Line 29: Line 52:
do:
{{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb}}}
then:
{{{echo "saa7134-dvb" >> /etc/modules}}}		 then modprobe:
 {{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb
echo "saa7134-dvb" >> /etc/modules}}}
Line 34: Line 56:
now get the frimware compatible with your card from now  get the firmware compatible with your card from
Line 36: Line 58:
then "sudo" copy it to
/lib/firmware/2.6.17-10-generic/		 then "sudo" copy it to /lib/firmware
Line 39: Line 60:
{{{sudo reboot  {{{sudo reboot
Line 43: Line 64:
now it is installed soon i will write another howto for scanning channels...
:)

 		 use scantv or mythtv to scan for channels
i will wrtie a tutorial as soon as i get to it

'About me'

My name is Seif Lotfy and I'm form Cairo/Egypt. I am 22 and studying Computational Engineering at TU-Darmstadt (Germany). I have been using Ubuntu since October 2004 when it was released. (I also orderd soem CDs to test if i would actually get them). I am really into robots too and i have been participatign with the GermanTeam at the RoboCup since 2006. I also like programing GUIs alot. blablablablablabla ...........

'Contact'

if u want to contact me : E-Mail: seif@lotfy.com MSN: xeifer@hotmail.com ICQ: 21815774 Yahoo: seiflotfy AOL: seiflotfy

'Howto's'

Howto install Hauppauge WinTV HVR 1100 under Ubuntu(Edgy)

This howto is for installing Hauppuage WinTV HVR 1100 under Ubuntu "might work for other wintv cards" no guarantee though...

I used this froum its in french though --> http://forum.ubuntu-fr.org/viewtopic.php?id=73834&p=1

Here we go first check if your card got detected

seiflotfy (last edited 2008-08-06 16:17:33 by localhost)