seiflotfy

Differences between revisions 3 and 4
⇤ ← Revision 3 as of 2006-11-12 13:09:11 →
Size: 1539
Editor: p50877A40
Comment:
← Revision 4 as of 2006-11-12 13:13:22 → ⇥
Size: 1549
Editor: p50875F66
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
Line 5: Line 6:
Line 9: Line 11:
{{{lspci}}}  {{{lspci}}}
Line 11: Line 13:
{{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)  {{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
Line 19: Line 21:
{{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils}}  {{{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils}}}
Line 29: Line 31:
do:
{{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb}}}
then:
{{{echo "saa7134-dvb" >> /etc/modules}}}		 then modprobe:
{{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb
echo "saa7134-dvb" >> /etc/modules}}}
Line 34: Line 35:
now get the frimware compatible with your card from now  get the frimware compatible with your card from
Line 39: Line 40:
{{{sudo reboot
}}}		 {{{sudo reboot}}}
Line 43: Line 43:
now it is installed soon i will write another howto for scanning channels...
:)

 		 use scantv or mythtv to scan for channels
i will wrtie a tutorial as soon as i get to it

Howto install Hauppauge WinTV HVR 1100 under Ubuntu(Edgy)

This howto is for installing Hauppuage WinTV HVR 1100 under Ubuntu "might work for other wintv cards" no guarantee though...

I used this froum its in french though --> http://forum.ubuntu-fr.org/viewtopic.php?id=73834&p=1

Here we go first check if your card got detected

  • lspci

you should get something like:

  • {{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
    • Subsystem: Hauppauge computer works Inc.: Unknown device 6701 Flags: bus master, medium devsel, latency 32, IRQ 12 Memory at eb101000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2}}}

first make sure you have the packacges required for the configuration of the Card open a console and type:

  • sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils

then get the v4l-dvb files: {{{cd /opt/ hg clone http://linuxtv.org/hg/v4l-dvb|| cd v4l-dvb make sudo make install sudo -s}}}

then modprobe: {{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb echo "saa7134-dvb" >> /etc/modules}}}

now get the frimware compatible with your card from http://thadathil.net:8000/dvb/ then "sudo" copy it to /lib/firmware/2.6.17-10-generic/

sudo reboot

I think that was it use scantv or mythtv to scan for channels i will wrtie a tutorial as soon as i get to it

seiflotfy (last edited 2008-08-06 16:17:33 by localhost)