seiflotfy
Differences between revisions 3 and 5 (spanning 2 versions)
1539
Comment:
|
1556
|
Deletions are marked like this. | Additions are marked like this. |
Line 5: | Line 5: |
Line 9: | Line 10: |
{{{lspci}}} | {{{lspci }}} |
Line 11: | Line 13: |
{{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1) | {{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1) |
Line 17: | Line 19: |
first make sure you have the packacges required for the configuration of the Card open a console and type: {{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils}} |
first make sure you have the packacges required for the configuration of the card, open a console and type: {{{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils }}} |
Line 22: | Line 24: |
{{{cd /opt/ | {{{cd /opt/ |
Line 29: | Line 31: |
do: {{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb}}} then: {{{echo "saa7134-dvb" >> /etc/modules}}} |
then modprobe: {{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb echo "saa7134-dvb" >> /etc/modules}}} |
Line 34: | Line 35: |
now get the frimware compatible with your card from | now get the firmware compatible with your card from |
Line 39: | Line 40: |
{{{sudo reboot | {{{sudo reboot |
Line 43: | Line 44: |
now it is installed soon i will write another howto for scanning channels... :) |
use scantv or mythtv to scan for channels i will wrtie a tutorial as soon as i get to it |
Howto install Hauppauge WinTV HVR 1100 under Ubuntu(Edgy)
This howto is for installing Hauppuage WinTV HVR 1100 under Ubuntu "might work for other wintv cards" no guarantee though...
I used this froum its in french though --> http://forum.ubuntu-fr.org/viewtopic.php?id=73834&p=1
Here we go first check if your card got detected
seiflotfy (last edited 2008-08-06 16:17:33 by localhost)