BootDegradedRaid
Size: 4102
Comment: the all caps RAID causes problems with auto-linking
|
Size: 13014
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 2: | Line 2: |
||<tablestyle="float:right; font-size: 0.9em; width:40%; background:#F1F1ED; margin: 0 0 1em 1em;" style="padding:0.5em;">'''Contents'''[[BR]][[TableOfContents(3)]]|| == Overview == |
|
Line 25: | Line 29: |
* HotplugRaid | |
Line 35: | Line 39: |
* Switch to use the '''mdadm --incremental''' assembly, supported by mdadm version in 8.04. | |
Line 38: | Line 43: |
* {{{ /usr/share/initramfs-tools/scripts/init-premount/mdadm:mountroot_fail() }}} | |
Line 44: | Line 50: |
''Will be documented here as implementation occurs'' | === Phase 1: mdadm/initramfs modifications === The first phase of this specification involves modifications to '''mdadm''' and '''initramfs-tools'''. As of 2008-07-25, patches are attached to wiki:Bug:120375, and available in [https://launchpad.net/~kirkland/+archive kirkland's PPA]. ==== Testing Instructions ==== The following are instructions for safely testing this in a KVM: 1. Create a pair of smallish disk images, disk1.img and disk2.img * HOST: {{{ seq 1 2 | xargs -i dd if=/dev/zero of=disk{}.img bs=1M count=1000 }}} 1. Obtain an Ubuntu Server Intrepid ISO * HOST: {{{ wget http://cdimage.ubuntu.com/ubuntu-server/daily/current/intrepid-server-amd64.iso }}} 1. Install Intrepid into a KVM * HOST: {{{ kvm -hda disk1.img -hdb disk2.img -m 256 -cdrom intrepid-server-amd64.iso }}} * Use manual partitioning to create a pair of RAID partitions * create a RAID1 md device * format that device ext3 * set that device to mount on / 1. After installation, reboot and check that the RAID1 is set up properly, clean, and sync'd * KVM: {{{ cat /proc/mdstat }}} * KVM: {{{ mdadm --detail /dev/md0 }}} 1. Obtain the updated test packages from my PPA * KVM: {{{ sudo echo deb http://ppa.launchpad.net/kirkland/ubuntu intrepid main >> /etc/apt/sources.list }}} * KVM: {{{ sudo apt-get update }}} * KVM: {{{ sudo apt-get upgrade }}} 1. Check that you have my ppa packages * KVM: {{{ dpkg -l | grep mdadm }}} * KVM: {{{ dpkg -l | grep initramfs-tools }}} 1. Reboot once to ensure that your working, standard, clean, sync'd RAID continues to boot * KVM: {{{ sudo reboot }}} * KVM: ... 1. Power down the virtual machine * KVM: {{{ sudo poweroff }}} 1. Start the KVM back up, without disk2.img * HOST: {{{ kvm -hda disk1.img -m 256 }}} * Allow it to boot to a busybox prompt, checking that the default behavior is preserved 1. Start the KVM back up, without disk2.img * HOST: {{{ kvm -hda disk1.img -m 256 }}} 1. press ESC to enter the grub menu 1. press "e" to edit your kernel command options 1. press DOWN to highlight your kernel line 1. press "e" to edit your kernel line 1. add one of * bootdegraded * bootdegraded=true * bootdegraded=1 * bootdegraded=yes 1. press ENTER 1. press "b" to boot * After it times out looking for the root device (~30s), it should bring up the RAID in degraded mode, check this with * KVM: {{{ cat /proc/mdstat }}} * KVM: {{{ mdadm --detail /dev/md0 }}} * Power down the virtual machine * KVM: {{{ sudo poweroff }}} 1. Start the KVM back up, this time with both disks * HOST: {{{ kvm -hda disk1.img -hdb disk2.img -m 256 }}} * Ensure that it boots, and check the status of your RAID * KVM: {{{ cat /proc/mdstat }}} * KVM: {{{ mdadm --detail /dev/md0 }}} * Note that it should only have the first of the 2 devices active. This is because the system does not have any reason to trust the reliability of this second device, since it previously disappeared. * Manually add it back to the RAID * KVM: {{{ sudo mdadm /dev/md0 --add /dev/sdb1 }}} * And wait a couple of minutes until it finishes done re-syncing * KVM: {{{ watch -n1 cat /proc/mdstat }}} * Once it's done, reboot the virtual machine, and check that it comes back up with both disks active and sync'd * KVM: {{{ sudo reboot }}} * KVM: ... * KVM: {{{ cat /proc/mdstat }}} * KVM: {{{ mdadm --detail /dev/md0 }}} * Now, test using the configuration file * KVM: {{{ sudo echo "BOOT_DEGRADED=true" > /etc/initramfs-tools/conf.d/mdadm }}} * KVM: {{{ sudo update-initramfs -u }}} * KVM: {{{ sudo poweroff }}} 1. Start the KVM back up, without disk2.img * {{{ kvm -hda disk1.img -m 256 }}} * ESC to the grub menu, and add "bootdegraded=false" to the kernel options * Test that the kernel option overrides the configuration file * It should boot to a busybox prompt 1. Start the KVM up again without disk2.img * {{{ kvm -hda disk1.img -m 256 }}} * Do not edit the kernel options, let it find the BOOT_DEGRADED=true in the configuration file * It should boot with a degraded RAID again * KVM: {{{ cat /proc/mdstat }}} * KVM: {{{ mdadm --detail /dev/md0 }}} === Phase 2: grub/installer modifications === ''No progress yet'' |
Line 57: | Line 150: |
* Compare with HotplugRaid for a common use and test case. == Comments == === Howto boot degraded raids === In ubuntu md devices are set up by udev rules. The mdadm tool shiped with ubuntu supports the --incremental option since 8.04, but it is not used (Causing errors wiki:Bug:157981 wiki:Bug:244792). '''You will need to adjust the following:''' 1. Switch to mdadm --incremental * The mdadm --incremental option does not create device nodes (wiki:Bug:251663). Furthermore --increment defaults to expect the new device naming scheme for partitionable md devices. (As a workaround you can make your existing devices static by "cp -a /dev/mdX /lib/udev/devices/", and configuring the auto=md scheme in /etc/mdadm/mdadm.conf) * /etc/udev/rules.d/85-mdadm.rules: *The mdadm call needs to be changed to "mdadm --incremantal /dev/%k" *The command "watershed" is not installed by default, at least not in xubuntu 8.04. Is this a build-in of udev? * See: {{{ /usr/lib/udev }}} * I can't find a watershed file there. * Rules for removal events are needed. wiki:Bug:244803 * "mdadm --incremental" will save state in a map file under /var/run/mdadm/map, but during early boot this directory does not yet exist and the state is saved in /var/run/mdadm.map.new (Change man page, it says /var/run/mdadm.map) The early map needs to be moved to the run-time path or something. (Beware of undefined state between mkdir and mv operation for hotplug events?) The --incremental option in the udev rule will only start complete arrays (wiki:Bug:244808), just as the "--assemble --no-degraded" before, but will more appropriately determine what to do with found array members. It will add devices to inactive or running arrays and will start the array in auto-readonly mode. This allows raid members that may come up later to join running arrays very smoothly without resyncing if nothing has been written to the array yet. 1. To start arrays that are necessary during boot in degraded mode some extra attention is needed: Do not just run any array that may be partially available (mdadm --assemble --scan), but only those that are actually needed at the particular point of time. (i.e. it is not a good idea to start for example the /home array in degraded mode, when we just need the rootfs to boot first. Some slower or external disks of the /home array may become available later.) * The mount script in the initramfs will have to check for hotpluged devices. (wiki:Bug:83025): {{{ while [ ! -e "${ROOT}" ] || ! /lib/udev/vol_id "${ROOT}" >/dev/null 2>&1; do /bin/sleep 0.1 slumber=$(( ${slumber} - 1 )) [ ${slumber} -gt 0 ] || break done if timeout has been reached: mdadm --run <root md device> (through failure_hooks) (The udev+lvm/crypt/.. hotplug will then go on, so...) while ... }}} (With wish wiki:Bug:251646 additional members will even join smoothly later using --incremental in udev rule.) * Provide same approach in init.d/mdadm-degrade for any other device that needs to be (is configured to be) started even if degraded. (maybe a all/whitelist/blacklist configuration in /etc/default/mdadm or mdadm.conf?) Let /etc/init.d/mdadm-degrade (more descriptively and less redundantly than mdadm-raid) check if such devices have come up like above, and try to start configured arrays that are unavailable in degraded mode. Without this selective approach (with -ARs) some partly pluged in array members (removable disks) might get started unintentionally. (It is more concise, when getting the hotplug event "array plugged in" allways means all (active) members are plugged in. wiki:Bug:244810 ) 1. Desktop integration: * Show unstarted lonely array member partitions as icons with right-click "start degraded" option. Rules to stop md arrays when their filesystem is beeing unmounted, so that if members are removed after unmountig the filesystem they won't get set faulty. * A right-click "remove array member" option, to remove a (mirror) member from a running array. * Raid status monitoring frontend GUI to /proc/mdstat etc. |
ContentsBRTableOfContents(3) |
Overview
Launchpad Entry: https://blueprints.edge.launchpad.net/ubuntu/+spec/boot-degraded-raid
Created: 2008-05-30
Contributors: DustinKirkland
Packages affected: mdadm, grub, initramfs, udev, lvm2
Summary
This specification defines a methodology for enhancing Ubuntu's boot procedures to configure and support booting a system dependent on a degraded RAID1 device.
Rationale
Ubuntu's installer currently supports installation to software RAID1 targets for /boot and /. When one of the mirrored disks fails, and mdadm marks the RAID degraded, it becomes impossible to reboot the system in an unattended manner.
Booting Ubuntu with a failed device in a RAID1 will force the system into a recovery console.
In some cases, this is the desired behavior, as a local system administrator would want to backup critical data, cleanly halt the system, and replace the faulty hardware immediately.
In other cases, this behavior is highly undesired--particularly when the system administrator is remotely located and would prefer a system with redundant disks tolerate a failed device even on reboot.
Use Cases
- Kim uses software RAID since it is less expensive than hardware RAID, and since it is always available on any Ubuntu system with multiple disk devices. She particularly likes it on low-end and small-form-factor servers without built-in Hardware RAID, such as her arrays of blades and 1-U rack mount systems. She uses RAID1 (mirroring) as a convenient mechanism for providing runtime failover of hard disks in Ubuntu. Kim remotely administers her systems, where she has taken great care to use redundant disks in a RAID1 configuration. She absolutely wants to be able to tolerate a RAID degradation event and continue to boot such systems in an unattended manner until she is able to replace the faulty hardware. After rebooting her system following a primary drive failure, the system automatically boots from the secondary drive and brings up the RAID in degraded mode in a fully functional (though unprotected) configuration, since she specified in her system configuration to boot even if the RAID is degraded.
Steph also uses software RAID1 on her /boot and / filesystems. Steph is always physically present at the console when she reboots systems, and she always has spare disks on hand. Steph never wants to boot into a system with a degraded MD array. Steph configures her system to trap booting to a degraded array and instead deliver the system to a recovery console, thus more conservatively protecting her data at the expense of yielding her system unbootable in an unattended manner.
Scope
The scope of this specification is to solve this problem within Ubuntu's software raid support and default bootloader within the Intrepid Ibex development cycle.
Design / Work Items
Bootloader
- grub-install needs to detect (/boot on an md?) or be configured to install grub to multiple devices, thus rendering multiple disks bootable
- should probably also document that manual BIOS changes may be required for disk boot failover to occur properly
Switch to use the mdadm --incremental assembly, supported by mdadm version in 8.04.
MD Error Handling
- more verbose error hook messages
- teach md error handler how to bring up md in degraded mode
/usr/share/initramfs-tools/scripts/init-premount/mdadm:mountroot_fail()
Root Filesystem Wait
- reduce rootfs wait timeout to 30 seconds (DONE)
- option to abort rootfs wait, seems non-trivial, but quite handy
Implementation
Phase 1: mdadm/initramfs modifications
The first phase of this specification involves modifications to mdadm and initramfs-tools. As of 2008-07-25, patches are attached to wiki:120375, and available in [https://launchpad.net/~kirkland/+archive kirkland's PPA].
Testing Instructions
The following are instructions for safely testing this in a KVM:
- Create a pair of smallish disk images, disk1.img and disk2.img
HOST: seq 1 2 | xargs -i dd if=/dev/zero of=disk{}.img bs=1M count=1000
- Obtain an Ubuntu Server Intrepid ISO
HOST: wget http://cdimage.ubuntu.com/ubuntu-server/daily/current/intrepid-server-amd64.iso
- Install Intrepid into a KVM
HOST: kvm -hda disk1.img -hdb disk2.img -m 256 -cdrom intrepid-server-amd64.iso
- Use manual partitioning to create a pair of RAID partitions
- create a RAID1 md device
- format that device ext3
- set that device to mount on /
- After installation, reboot and check that the RAID1 is set up properly, clean, and sync'd
KVM: cat /proc/mdstat
KVM: mdadm --detail /dev/md0
- Obtain the updated test packages from my PPA
KVM: sudo echo deb http://ppa.launchpad.net/kirkland/ubuntu intrepid main >> /etc/apt/sources.list
KVM: sudo apt-get update
KVM: sudo apt-get upgrade
- Check that you have my ppa packages
KVM: dpkg -l | grep mdadm
KVM: dpkg -l | grep initramfs-tools
- Reboot once to ensure that your working, standard, clean, sync'd RAID continues to boot
KVM: sudo reboot
- KVM: ...
- Power down the virtual machine
KVM: sudo poweroff
- Start the KVM back up, without disk2.img
HOST: kvm -hda disk1.img -m 256
- Allow it to boot to a busybox prompt, checking that the default behavior is preserved
- Start the KVM back up, without disk2.img
HOST: kvm -hda disk1.img -m 256
- press ESC to enter the grub menu
- press "e" to edit your kernel command options
- press DOWN to highlight your kernel line
- press "e" to edit your kernel line
- add one of
- bootdegraded
- bootdegraded=true
- bootdegraded=1
- bootdegraded=yes
- press ENTER
- press "b" to boot
- After it times out looking for the root device (~30s), it should bring up the RAID in degraded mode, check this with
KVM: cat /proc/mdstat
KVM: mdadm --detail /dev/md0
- Power down the virtual machine
KVM: sudo poweroff
- Start the KVM back up, this time with both disks
HOST: kvm -hda disk1.img -hdb disk2.img -m 256
- Ensure that it boots, and check the status of your RAID
KVM: cat /proc/mdstat
KVM: mdadm --detail /dev/md0
- Note that it should only have the first of the 2 devices active. This is because the system does not have any reason to trust the reliability of this second device, since it previously disappeared.
- Manually add it back to the RAID
KVM: sudo mdadm /dev/md0 --add /dev/sdb1
- And wait a couple of minutes until it finishes done re-syncing
KVM: watch -n1 cat /proc/mdstat
- Once it's done, reboot the virtual machine, and check that it comes back up with both disks active and sync'd
KVM: sudo reboot
- KVM: ...
KVM: cat /proc/mdstat
KVM: mdadm --detail /dev/md0
- Now, test using the configuration file
KVM: sudo echo "BOOT_DEGRADED=true" > /etc/initramfs-tools/conf.d/mdadm
KVM: sudo update-initramfs -u
KVM: sudo poweroff
- Start the KVM back up, without disk2.img
kvm -hda disk1.img -m 256
- ESC to the grub menu, and add "bootdegraded=false" to the kernel options
- Test that the kernel option overrides the configuration file
- It should boot to a busybox prompt
- Start the KVM up again without disk2.img
kvm -hda disk1.img -m 256
- Do not edit the kernel options, let it find the BOOT_DEGRADED=true in the configuration file
- It should boot with a degraded RAID again
KVM: cat /proc/mdstat
KVM: mdadm --detail /dev/md0
Phase 2: grub/installer modifications
No progress yet
Outstanding Issues
References
https://blueprints.launchpad.net/ubuntu/+spec/boot-degraded-raid
https://wiki.ubuntu.com/UDS-Intrepid/Report/Server#head-75c995bdf63bb5afe0f08461aba9200b6c95814f
https://lists.ubuntu.com/archives/ubuntu-devel/2007-September/024221.html
http://www.outflux.net/blog/archives/2006/04/23/grub-yaird-mdadm-and-missing-drives/
http://osdir.com/ml/linux.redhat.anaconda.devel/2005-05/threads.html
wiki:120375
wiki:125471
Compare with HotplugRaid for a common use and test case.
Comments
Howto boot degraded raids
In ubuntu md devices are set up by udev rules. The mdadm tool shiped with ubuntu supports the --incremental option since 8.04, but it is not used (Causing errors wiki:157981 wiki:244792).
You will need to adjust the following:
- Switch to mdadm --incremental
The mdadm --incremental option does not create device nodes (wiki:251663). Furthermore --increment defaults to expect the new device naming scheme for partitionable md devices. (As a workaround you can make your existing devices static by "cp -a /dev/mdX /lib/udev/devices/", and configuring the auto=md scheme in /etc/mdadm/mdadm.conf)
- /etc/udev/rules.d/85-mdadm.rules:
- The mdadm call needs to be changed to "mdadm --incremantal /dev/%k"
- The command "watershed" is not installed by default, at least not in xubuntu 8.04. Is this a build-in of udev?
See: /usr/lib/udev
- I can't find a watershed file there.
- The command "watershed" is not installed by default, at least not in xubuntu 8.04. Is this a build-in of udev?
Rules for removal events are needed. wiki:244803
- The mdadm call needs to be changed to "mdadm --incremantal /dev/%k"
- "mdadm --incremental" will save state in a map file under /var/run/mdadm/map, but during early boot this directory does not yet exist and the state is saved in /var/run/mdadm.map.new (Change man page, it says /var/run/mdadm.map) The early map needs to be moved to the run-time path or something. (Beware of undefined state between mkdir and mv operation for hotplug events?)
The --incremental option in the udev rule will only start complete arrays (wiki:244808), just as the "--assemble --no-degraded" before, but will more appropriately determine what to do with found array members. It will add devices to inactive or running arrays and will start the array in auto-readonly mode. This allows raid members that may come up later to join running arrays very smoothly without resyncing if nothing has been written to the array yet.
- To start arrays that are necessary during boot in degraded mode some extra attention is needed:
- Do not just run any array that may be partially available (mdadm --assemble --scan), but only those that are actually needed at the particular point of time. (i.e. it is not a good idea to start for example the /home array in degraded mode, when we just need the rootfs to boot first. Some slower or external disks of the /home array may become available later.)
The mount script in the initramfs will have to check for hotpluged devices. (wiki:83025):
while [ ! -e "${ROOT}" ] || ! /lib/udev/vol_id "${ROOT}" >/dev/null 2>&1; do /bin/sleep 0.1 slumber=$(( ${slumber} - 1 )) [ ${slumber} -gt 0 ] || break done if timeout has been reached: mdadm --run <root md device> (through failure_hooks) (The udev+lvm/crypt/.. hotplug will then go on, so...) while ...
(With wish wiki:251646 additional members will even join smoothly later using --incremental in udev rule.)
- Provide same approach in init.d/mdadm-degrade for any other device that needs to be (is configured to be) started even if degraded. (maybe a all/whitelist/blacklist configuration in /etc/default/mdadm or mdadm.conf?) Let /etc/init.d/mdadm-degrade (more descriptively and less redundantly than mdadm-raid) check if such devices have come up like above, and try to start configured arrays that are unavailable in degraded mode.
Without this selective approach (with -ARs) some partly pluged in array members (removable disks) might get started unintentionally. (It is more concise, when getting the hotplug event "array plugged in" allways means all (active) members are plugged in. wiki:244810 )
- Desktop integration:
- Show unstarted lonely array member partitions as icons with right-click "start degraded" option. Rules to stop md arrays when their filesystem is beeing unmounted, so that if members are removed after unmountig the filesystem they won't get set faulty.
- A right-click "remove array member" option, to remove a (mirror) member from a running array.
- Raid status monitoring frontend GUI to /proc/mdstat etc.
BootDegradedRaid (last edited 2010-04-21 10:02:37 by 188-194-18-172-dynip)