HardwareSupportComponentsMultimediaHauppauge
Summary
Make |
Model |
Chipset/Driver |
Auto detected? |
Works? |
Ubuntu Version |
Comments |
Last Updated |
Hauppauge |
WinTV Express |
bt878/bttv |
No |
Yes |
|
Tuner detected incorrectly. Fix the problem by using commands "sudo rmmod bttv" and "sudo modprobe bttv tuner=51". To make settings permanent, add lines "alias video0 bttv" and "options bttv tuner=51" into file /etc/modprobe.d/bttv and run "update-modules" while being root (or use sudo) |
2005-Mar-28 |
Hauppauge |
WinTV PCI (bt848) |
bt848 / bttv |
No |
No |
|
Tried loading bttv card=2, no luck |
2005-Jan-30 |
Hauppauge |
WinTV PCI (bt878) |
bt878 / bttv |
Yes |
Yes |
v6.06 (Dapper, v6.10 (Edgy) |
Sometimes doesn't work at all, haven't researched it; Rebooting (sometimes twice) helps always. |
2007-Jan-08 |
Hauppauge |
WinTV GO2 |
Conexant 881 / cx88 |
Yes |
Yes |
v6.10 (Edgy, v7.04 (Feisty) |
On Edgy, follow the instructions from the dvb Wiki at linuxtv to compile the latest drivers) On Feisty Out off the box |
2007-Mar-22 |
Hauppauge |
WinTV PVR 150 |
|
Yes |
Yes |
v7.04 (Feisty) |
Have a look at Install IVTV on Feisty |
2007-Sep-02 |
Hauppauge |
WinTV PVR 250 |
|
No |
Yes |
v5.10 (Breezy) |
Works fine with mythtv. Follow http://hyams.webhop.net/mythtv/myth_ubuntu.html Also have a look at Install IVTV on Feisty |
2006-Feb-05 |
Hauppauge |
WinTV PVR 500 |
|
Yes |
Yes |
v7.04 (Feisty) |
Tested with MythTV, both tuners work simultaniously (only tested via antenne yet.) Also have a look at Install IVTV on Feisty |
2007-Jun-07 |
Hauppauge |
WinTV PVR USB2 (External Tuner) |
Varies more info here. |
No (not sure about Feisty) |
Yes |
v6.10 (Edgy) |
For instructions on how to set this up, visit here. For help with the 29xxx series look at this post. |
2007-Jul-26 |
Hauppauge |
Nova-T-STICK USB2 |
DiB0700 |
Yes |
Yes |
v6.10 (Edgy), v7.04 (Feisty) |
Don't confuse this (as I did) with the older Nova-T USB2 widget which has a completely different chipset! Older firmware had I2C errors and random disconnects, but now works great after compiling latest v4l-dvb driver and installing latest firmware. |
2007-Sep-18 |
Hauppauge |
Nova-T-STICK SE/CE (USB2) |
DiB0700 |
Yes |
Yes |
8.04 |
Needs the kernel from hardy-updates |
2008-Oct-17 |
Hauppauge |
Nova-T (PCI) |
|
Yes |
Yes |
v7.04 (Feisty) |
Hardware is supported out of the box. Try Kaffeine for viewing video as this has a nice auto-tuning system |
2007-Jul-17 |
Hauppauge |
WinTV HVR-950 |
em2880 |
Yes |
Yes |
9.10 -- 10.10 |
Hardware is supported out of the box since 9.04 if I recall correctly. |
2011-Feb-1 |
Details
HowTo - Hauppauge Remote Control in Kubuntu: http://ubuntuforums.org/showthread.php?t=183545
For PVR-150 (and maybe others): if you want to change input from the default tv tuner to the composite input (yellow, red, white), run the following commands:
v4l2-ctl -d /dev/video0 -n - For getting the number of the desired input. Mine composite input is number 2.
v4l2-ctl -d /dev/video0 --set-input=2 - For setting the default input to the selected one. Replace the '2' after '--set-input=' with the correct number from the first command.
HardwareSupportComponentsMultimediaHauppauge (last edited 2011-02-04 04:20:28 by c-67-171-217-43)