HardwareSupportComponentsScannersEpson
2686
Comment: copied & pasted from previous table
|
3058
|
Deletions are marked like this. | Additions are marked like this. |
Line 12: | Line 12: |
|| Epson || Perfection 1660 Photo || || Yes || Yes || v. 6.10 (Edgy) || Works Out Of The Box except the front buttons. || 2007-Jan-22 || | |
Line 14: | Line 15: |
|| Epson || Perfection 2480 || esfw41.bin || Yes || Yes || || Place driver esfw41.bin (from Windows install CD) into /etc/sane.d/. Edit /etc/sane.d/snapscan.conf to point to the driver. || 2005-May-09 || | || Epson || Perfection 2480 || esfw41.bin || Yes || Yes || || Place driver esfw41.bin (from Windows installation) into /etc/sane.d/. Edit /etc/sane.d/snapscan.conf - line: 'firmware /etc/sane.d/esfw41.bin'. || 2005-May-09 || || Epson || Perfection 3490 Photo || ? || Yes || Yes || 7.10 Gutsy Gibbon || You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0122". || 2008-Apr-03 || |
Summary
Make |
Model |
Driver |
Supported |
Works? |
Ubuntu Version |
Comments |
Last Updated |
Epson |
CX3810 |
? |
No |
Yes |
v5.10 (Breezy) & v6.06 (Dapper) |
Under Ubuntu 6.06 just add "usb 0x4b8 0x818" (no quotes) right after the similar comented out line in /etc/sane.d/epson.conf - See PITA thread for more detail. Also works under Kubuntu 5.10 but I have to change the permissions on a file after every reboot. Search forums for cx3810 and read the PITA thread. http://ubuntuforums.org/showthread.php?t=121540 |
2006-Sep-16 |
Epson |
Stylus CX6500 |
?? |
No |
Yes |
|
You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0813". You can get the IDs with sane-find-scanner -q. |
2006-Oct-02 |
Epson |
Stylus CX6600 |
stp-escp2-cx6600.5.0.ppd |
Yes |
Yes |
v6.10 (Edgy) |
To enable the scanner (for non-root): add the vendor ID (0x04b8) and product ID (0x0813) to /etc/udev/rules.d/45-libsane.rules |
2006-Oct-09 |
Epson |
Stylus DX4850 |
?? |
No |
Mostly |
v6.06 (Dapper) |
You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0819". You can get the IDs with sane-find-scanner (install sane-utils). Then "sudo gedit /etc/udev/rules.d/45-libsane.rules": add your scanner in GROUP="scanner"; make sure your user-ID is in the group "scanner". Ignore the error-messages when closing the xsane. |
2006-Nov-03 |
Epson |
Perfection 1240U |
? |
Yes |
Yes |
|
Just Works! |
2005-Jan-31 |
Epson |
Perfection 1260 |
? |
Yes |
Yes |
v5.10 (Breezy) |
Works out of the box |
2005-Jun-07 |
Epson |
Perfection 1650 |
? |
Yes |
Yes |
|
Just Works! execpt for buttons on front which have no effect. |
2005-Jan-31 |
Epson |
Perfection 1660 Photo |
|
Yes |
Yes |
v. 6.10 (Edgy) |
Works Out Of The Box except the front buttons. |
2007-Jan-22 |
Epson |
Perfection 1670 Photo |
esfw30.bin |
Yes |
Yes |
|
Works except for buttons on front. Extract firmware from official drivers using unshield, then set path in /etc/sane.d/snapscan.conf |
2005-Jun-17 |
Epson |
Perfection 2400 Photo |
GT-9300.drc |
Yes |
Yes |
|
autodetected by xsane, works fine - except buttons |
2005-Jul-22 |
Epson |
Perfection 2480 |
esfw41.bin |
Yes |
Yes |
|
Place driver esfw41.bin (from Windows installation) into /etc/sane.d/. Edit /etc/sane.d/snapscan.conf - line: 'firmware /etc/sane.d/esfw41.bin'. |
2005-May-09 |
Epson |
Perfection 3490 Photo |
? |
Yes |
Yes |
7.10 Gutsy Gibbon |
You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0122". |
2008-Apr-03 |
Epson |
Perfection 4870 Photo |
? |
No |
No |
v5.10 (Breezy) |
need to edit /etc/hotplug/usb/libsane.usermap: add a line for this scanner with 04b8 and 0128 under 0xVVVV and 0xPPPP respectively. It then works. |
2005-Oct-25 |
HardwareSupportComponentsScannersEpson (last edited 2015-06-13 13:26:59 by fnet181-f92-access)