HardwareSupportComponentsScannersEpson
2845
Comment:
|
← Revision 29 as of 2015-06-13 13:26:59 ⇥
6011
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
[[http://www.sane-project.org/cgi-bin/driver.pl?manu=epson|Epson Scanners supported by the Sane Project]] |
|
Line 3: | Line 5: |
Line 5: | Line 6: |
|| Epson || CX3810 || ? || No || Yes || v5.10 (Breezy) & v6.06 (Dapper) || Under Ubuntu 6.06 just add "usb 0x4b8 0x818" (no quotes) right after the similar comented out line in /etc/sane.d/epson.conf - See PITA thread for more detail. Also works under Kubuntu 5.10 but I have to change the permissions on a file after every reboot. Search forums for cx3810 and read the PITA thread. http://ubuntuforums.org/showthread.php?t=121540 || 2006-Sep-16 || || Epson || Stylus CX6500 || ?? || No || Yes || || You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0813". You can get the IDs with sane-find-scanner -q. || 2006-Oct-02 || || Epson || Stylus CX6600||stp-escp2-cx6600.5.0.ppd||Yes||Yes|| v6.10 (Edgy) || To enable the scanner (for non-root): add the vendor ID (0x04b8) and product ID (0x0813) to /etc/udev/rules.d/45-libsane.rules|| 2006-Oct-09 || || Epson || Stylus DX4850 || ?? || No || Mostly || v6.06 (Dapper) || You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0819". You can get the IDs with sane-find-scanner (install sane-utils). Then "sudo gedit /etc/udev/rules.d/45-libsane.rules": add your scanner in GROUP="scanner"; make sure your user-ID is in the group "scanner". Ignore the error-messages when closing the xsane. || 2006-Nov-03 || |
|| Epson || Perfection 660 || tail_061.bin || Yes || Mostly || v. 8.10 (Interpid) ||Place driver tail_061.bin (from Windows installation) into /etc/sane.d/. Edit /etc/sane.d/snapscan.conf - line: 'firmware /etc/sane.d/esfw41.bin'. See: http://ubuntuforums.org/showthread.php?p=6798088 || 2009-Feb-25 || |
Line 16: | Line 14: |
|| Epson || Perfection 3170 Photo || ? || ? || ? || 9.04 Jaunty Jackalope || Reported to work on 32 bit with drivers from Epson web site in Japan; fails on 64 bit || 16/4/09 || || Epson || Perfection 3490 Photo || ? || Yes || Yes || 7.10 Gutsy Gibbon || You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0122". || 2008-Apr-03 || || Epson || Perfection 4490 Photo || epkowa || Yes || Yes || 9.10 Karmic || Requires sane to be installed. And some packages from AVASYS. See for instructions: [[http://linuxforeverything.com/wordpress/?p=27|blog post]] || 2010-Apr-17|| |
|
Line 17: | Line 18: |
|| Epson || Perfection V300 Photo || epkowa || Yes || Yes|| 10.10 (32 bit) || Requires debs (iscan & esci-interpreter) from AVASYS and libltdl3 from older dist. || 2011-Jan-05 || || Epson || Perfection V330 Photo|| epkowa || No || Yes|| 10.10 (32 bit) || Requires debs (iscan & esci-interpreter) from AVASYS plus libltdl3 from older dist. || 2011-Jan-05 || || Epson || Perfection V600 Photo || iscan || ? || Yes || 10.04 (tested on 64bit with iscan libltdl7 drivers), 9.10 ([[http://learn.rrproject.com/2010/02/epson-perfection-v600-on-ubuntu-linux/|reportedly]]), 8.10 (untested but libltdl7 drives are listed for 8.10 so non-libltdl7 drivers probably work for at least 8.04 too) || Requires [[http://www.avasys.jp/lx-bin2/linux_e/scan/DL2.do|iscan]] debs to be installed || 2010-May-03 || || Epson || Stylus CX3200 || ?|| ? || Yes || 8.04, 8.10, 9.04 || Works || 2010-Mar-10 || || Epson || Stylus CX3700 || Default || Yes || Yes || 8.04, 8.10, 9.04, 10.10 || Works out of the box, even if identified as CX3900 || 2010-Nov-28 || || Epson || Stylus CX3810 || ? || No || Yes || v5.10 (Breezy) & v6.06 (Dapper) || Under Ubuntu 6.06 just add "usb 0x4b8 0x818" (no quotes) right after the similar comented out line in /etc/sane.d/epson.conf - See PITA thread for more detail. Also works under Kubuntu 5.10 but I have to change the permissions on a file after every reboot. Search forums for cx3810 and read the PITA thread. http://ubuntuforums.org/showthread.php?t=121540 || 2006-Sep-16 || || Epson || Stylus CX6500 || ?? || No || Yes || || You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0813". You can get the IDs with sane-find-scanner -q. || 2006-Oct-02 || || Epson || Stylus CX6600||stp-escp2-cx6600.5.0.ppd||Yes||Yes|| v6.10 (Edgy) || To enable the scanner (for non-root): add the vendor ID (0x04b8) and product ID (0x0813) to /etc/udev/rules.d/45-libsane.rules|| 2006-Oct-09 || || Epson || Stylus CX9400Fax || ? || Yes || No || 9.04 || Scanner requires libsane-extras package to be recognized. Printer is recognized by CUPS. || 2009-Jul-23 || || Epson || Stylus DX4850 || ?? || No || Mostly || v6.06 (Dapper) || You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0819". You can get the IDs with sane-find-scanner (install sane-utils). Then "sudo gedit /etc/udev/rules.d/45-libsane.rules": add your scanner in GROUP="scanner"; make sure your user-ID is in the group "scanner". Ignore the error-messages when closing the xsane. || 2006-Nov-03 || || Epson || Stylus DX4850 || default || Yes || Yes || v8.04 (Hardy) || Works out of the box || 2008-Jun-20 || || Epson || Stylus SX100 || Image Scan! || Yes || Yes || 9.04 || Install iscan_2.21.1-6.ltdl7_i386.deb from avasys.jp/eng/ || 2009-Oct-11 || || Epson || Stylus SX115|| ? || Yes || Yes || 11.04 || Works out of the box. Ubuntu sees the device as SX110 (same drivers) so I think sx110 will work as well. || 2012-Mrt-25 || || Epson || Stylus TX121 || epkowa || Yes || Yes || 10.10 (Maverick) || Needs iscan_2.26.1-3.ltdl7_i386.deb and iscan-data_1.6.0-0_all.deb from AVASYS website || 2010-Dec-24 || || Epson || L210 || Ver. 2.30.1 1.0.0-1lsb3.2_amd64 || Yes || No || 12.04 (Precise) || Installation of drivers (scanner and printer) works fine. Printer works immediately. Scanner does not work. Image Scan! and Xsane starts the scan and gets stuck 9/10 times. || 2015-Jun-12 || ---- CategoryHardware |
Epson Scanners supported by the Sane Project
Summary
Make |
Model |
Driver |
Supported |
Works? |
Ubuntu Version |
Comments |
Last Updated |
Epson |
Perfection 660 |
tail_061.bin |
Yes |
Mostly |
v. 8.10 (Interpid) |
Place driver tail_061.bin (from Windows installation) into /etc/sane.d/. Edit /etc/sane.d/snapscan.conf - line: 'firmware /etc/sane.d/esfw41.bin'. See: http://ubuntuforums.org/showthread.php?p=6798088 |
2009-Feb-25 |
Epson |
Perfection 1240U |
? |
Yes |
Yes |
|
Just Works! |
2005-Jan-31 |
Epson |
Perfection 1260 |
? |
Yes |
Yes |
v5.10 (Breezy) |
Works out of the box |
2005-Jun-07 |
Epson |
Perfection 1650 |
? |
Yes |
Yes |
|
Just Works! execpt for buttons on front which have no effect. |
2005-Jan-31 |
Epson |
Perfection 1660 Photo |
|
Yes |
Yes |
v. 6.10 (Edgy) |
Works Out Of The Box except the front buttons. |
2007-Jan-22 |
Epson |
Perfection 1670 Photo |
esfw30.bin |
Yes |
Yes |
|
Works except for buttons on front. Extract firmware from official drivers using unshield, then set path in /etc/sane.d/snapscan.conf |
2005-Jun-17 |
Epson |
Perfection 2400 Photo |
GT-9300.drc |
Yes |
Yes |
|
autodetected by xsane, works fine - except buttons |
2005-Jul-22 |
Epson |
Perfection 2480 |
esfw41.bin |
Yes |
Yes |
|
Place driver esfw41.bin (from Windows installation) into /etc/sane.d/. Edit /etc/sane.d/snapscan.conf - line: 'firmware /etc/sane.d/esfw41.bin'. |
2005-May-09 |
Epson |
Perfection 3170 Photo |
? |
? |
? |
9.04 Jaunty Jackalope |
Reported to work on 32 bit with drivers from Epson web site in Japan; fails on 64 bit |
16/4/09 |
Epson |
Perfection 3490 Photo |
? |
Yes |
Yes |
7.10 Gutsy Gibbon |
You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0122". |
2008-Apr-03 |
Epson |
Perfection 4490 Photo |
epkowa |
Yes |
Yes |
9.10 Karmic |
Requires sane to be installed. And some packages from AVASYS. See for instructions: blog post |
2010-Apr-17 |
Epson |
Perfection 4870 Photo |
? |
No |
No |
v5.10 (Breezy) |
need to edit /etc/hotplug/usb/libsane.usermap: add a line for this scanner with 04b8 and 0128 under 0xVVVV and 0xPPPP respectively. It then works. |
2005-Oct-25 |
Epson |
Perfection V300 Photo |
epkowa |
Yes |
Yes |
10.10 (32 bit) |
Requires debs (iscan & esci-interpreter) from AVASYS and libltdl3 from older dist. |
2011-Jan-05 |
Epson |
Perfection V330 Photo |
epkowa |
No |
Yes |
10.10 (32 bit) |
Requires debs (iscan & esci-interpreter) from AVASYS plus libltdl3 from older dist. |
2011-Jan-05 |
Epson |
Perfection V600 Photo |
iscan |
? |
Yes |
10.04 (tested on 64bit with iscan libltdl7 drivers), 9.10 (reportedly), 8.10 (untested but libltdl7 drives are listed for 8.10 so non-libltdl7 drivers probably work for at least 8.04 too) |
Requires iscan debs to be installed |
2010-May-03 |
Epson |
Stylus CX3200 |
? |
? |
Yes |
8.04, 8.10, 9.04 |
Works |
2010-Mar-10 |
Epson |
Stylus CX3700 |
Default |
Yes |
Yes |
8.04, 8.10, 9.04, 10.10 |
Works out of the box, even if identified as CX3900 |
2010-Nov-28 |
Epson |
Stylus CX3810 |
? |
No |
Yes |
v5.10 (Breezy) & v6.06 (Dapper) |
Under Ubuntu 6.06 just add "usb 0x4b8 0x818" (no quotes) right after the similar comented out line in /etc/sane.d/epson.conf - See PITA thread for more detail. Also works under Kubuntu 5.10 but I have to change the permissions on a file after every reboot. Search forums for cx3810 and read the PITA thread. http://ubuntuforums.org/showthread.php?t=121540 |
2006-Sep-16 |
Epson |
Stylus CX6500 |
?? |
No |
Yes |
|
You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0813". You can get the IDs with sane-find-scanner -q. |
2006-Oct-02 |
Epson |
Stylus CX6600 |
stp-escp2-cx6600.5.0.ppd |
Yes |
Yes |
v6.10 (Edgy) |
To enable the scanner (for non-root): add the vendor ID (0x04b8) and product ID (0x0813) to /etc/udev/rules.d/45-libsane.rules |
2006-Oct-09 |
Epson |
Stylus CX9400Fax |
? |
Yes |
No |
9.04 |
Scanner requires libsane-extras package to be recognized. Printer is recognized by CUPS. |
2009-Jul-23 |
Epson |
Stylus DX4850 |
?? |
No |
Mostly |
v6.06 (Dapper) |
You need to add the product ID and device ID to /etc/sane.d/epson.conf, ie set the usb line to "usb 0x04b8 0x0819". You can get the IDs with sane-find-scanner (install sane-utils). Then "sudo gedit /etc/udev/rules.d/45-libsane.rules": add your scanner in GROUP="scanner"; make sure your user-ID is in the group "scanner". Ignore the error-messages when closing the xsane. |
2006-Nov-03 |
Epson |
Stylus DX4850 |
default |
Yes |
Yes |
v8.04 (Hardy) |
Works out of the box |
2008-Jun-20 |
Epson |
Stylus SX100 |
Image Scan! |
Yes |
Yes |
9.04 |
Install iscan_2.21.1-6.ltdl7_i386.deb from avasys.jp/eng/ |
2009-Oct-11 |
Epson |
Stylus SX115 |
? |
Yes |
Yes |
11.04 |
Works out of the box. Ubuntu sees the device as SX110 (same drivers) so I think sx110 will work as well. |
2012-Mrt-25 |
Epson |
Stylus TX121 |
epkowa |
Yes |
Yes |
10.10 (Maverick) |
Needs iscan_2.26.1-3.ltdl7_i386.deb and iscan-data_1.6.0-0_all.deb from AVASYS website |
2010-Dec-24 |
Epson |
L210 |
Ver. 2.30.1 1.0.0-1lsb3.2_amd64 |
Yes |
No |
12.04 (Precise) |
Installation of drivers (scanner and printer) works fine. Printer works immediately. Scanner does not work. Image Scan! and Xsane starts the scan and gets stuck 9/10 times. |
2015-Jun-12 |
HardwareSupportComponentsScannersEpson (last edited 2015-06-13 13:26:59 by fnet181-f92-access)