DellXPSM1210
Contact: Fernan Aguero [fernan dot aguero at gmail dot com], BaishampayanGhose, Aanjhan and MichaelMarner (Nvidia information)
- Brand: Dell
- Make : XPS
- Model: M1210
Website: http://www.dell.com/content/products/productdetails.aspx/xpsnb_m1210
Current Issues
Notes for Hardy Heron
- Extending the desktop with one extra monitor does not work without editing the xorg.conf manually
Notes for Hardy Heron alpha 4 - Added (March 19/2008), JoelPauling
- Screen Res fails with 1280x800 with either nvidia or nv driver. Had to manually edit xorg.conf
- Suspend fails to restore with nvidia driver from restricted drivers
- Has the hard drive powermanagment overcycle issue still
- Closing lid causes hang of X
- Hibernate is still broken
- New Wireless driver works well (iwl3945, however is erroneously named wlan0_rename due to bug in udev naming scripts during install. Fixed by removing the udev rules and having them regenerated on reboot.
- New Alsa mixer labels are correct, but now has different behaviour with mic as output muting internal speakers (before both external speakers and internal would work)
- hsf modem drivers still not included or in restricted drivers, meaning modem still not working
- Plugging USB mouse in is detected, but is not useable automatically (maybe artefact of my Xorg copying from my working config under gusty)
Notes for Kubuntu Gutsy Gibbon
- The default Power Management settings are not the best for a laptop (closing the lid doesn't trigger suspend/hibernate, the machine consumes all its battery, and an unclean shutdown ensues).
- If the laptop is connected to a TV with S-VHS, the session is locked when the lid closes. This can not be deactivated with the Power Manager, since it does not react to the setting. If I remember correctly, this only happens when there is a movie stream going to the TV. I will look more into this later.
System Info
bios-version:A01 system-manufacturer:Dell Inc. system-product-name:MXC062 system-version:Not Specified
Hardware details
|
in Dapper (LTS)? |
in Feisty |
in Gutsy |
Hardy |
Installation works? |
YES |
YES |
YES |
YES |
Hardware Information |
|||||
Screen & Monitors |
|||||
Device |
Works? |
Bug # |
|||
in Dapper (LTS) |
in Edgy |
in Feisty |
in Gutsy |
||
Screen |
Yes |
YES |
YES |
YES |
|
Correct resolution? |
Intel: After adjusting it manually, yes, it works at the native LCD resolution (1280x800) |
Intel: Untested | We need to use 915resolution like in Dapper| NVidia: YES |
Intel: After installing 915resolution| NVidia: Yes |
Intel: YES |
|
Correct refresh rate? |
YES |
YES |
YES |
YES |
|
3D Acceleration |
YES |
Intel: YES NVidia: After installing proprietary drivers from multiverse-restricted, yes |
Intel: YES |
YES |
|
External monitor works? |
Yes. But when running at the native 1280x800 resolution cycling through built-in only, built-in + external and external only (Fn+F8) does not adjust the resolution of the external display to one that the external monitor supports. This can be solved by configuring Xorg to have two Screen sections with different resolutions and using a different screen for the internal LCD display and for the external VGA port. |
NVidia: yes |
Untested |
Yes |
|
External monitor - mirrors |
Yes, with manual Xorg configuration |
Untested |
Yes, if plugged at boot |
Almost, probably have to edit the Xorg configuration file manually |
|
External monitor - extend desktop |
Yes, with manual Xorg configuration |
NVidia: After enabling TwinView in xorg.conf, yes |
Untested |
No, probably have to edit the Xorg configuration file manually |
|
Power Management |
|||||
Battery detected? |
Yes |
YES |
YES |
YES |
|
Hibernates? |
Yes |
Untested |
YES |
Untested |
|
Sleep |
YEs |
NO |
YES |
YES |
|
Dim monitor on battery |
Yes |
YES |
YES |
YES |
|
Blank monitor on inactivity |
Yes |
YES |
YES |
Untested |
|
Lid Close |
Yes, but not with default ubuntu settings |
Untested |
YES |
YES |
|
Cpu frequency scaling |
Yes |
YES |
YES |
YES |
|
Sound |
|||||
Sound works? |
Yes |
YES |
YES |
YES |
|
Correct volume? |
Yes |
YES |
YES |
YES |
|
Hardware volume switch |
Yes |
YES |
YES |
YES |
|
Headphone jack |
Yes |
YES |
YES |
YES |
|
Mic jack |
Untested |
Untested |
YES |
Works as line input, but not as a microphone input. |
|
Networking |
|||||
Wired NIC |
Yes |
YES |
YES |
YES |
|
Wireless NIC |
Yes, requires installation of linux-restricted packages |
YES |
YES |
YES |
|
PCMCIA NIC |
Untested |
Untested |
Untested |
Untested |
|
Firewire |
Untested |
Untested |
Untested |
Untested |
|
Bluetooth |
This model does not have this feature |
Works with an USB bluetooth dongle |
YES |
YES |
|
Modem |
Yes |
Connexant modem. Should work, but untested. |
No |
No |
|
Infrared |
Doesn't have IrDA |
Doesn't have IrDA |
Doesn't have IrDA |
Doesn't have IrDA |
|
Touchpad & Mice |
|||||
Touchpad |
Yes |
YES |
YES |
YES |
|
Touchpad - Doubletap = double click |
Yes |
YES |
YES |
YES |
|
Touchpad - Scroll down side |
Up/Down: Yes, Right/left: Yes |
Up/Down: Yes, Right/left: Yes |
Up/Down: Yes, Right/left: Yes |
Up/Down: Yes, Right/Left: Yes |
|
Touchpad - turned off while typing |
Apparently not, but need to know how to properly test this |
No |
No |
No |
|
External mouse - USB |
Yes |
Yes |
Yes |
Yes |
|
External mouse - Serial |
No serial port |
No serial port |
No serial port |
No serial port |
|
Docking Station/Port Replicator |
|||||
AC through replicator |
Untested |
Untested |
Untested |
Untested |
|
USB |
Untested |
Untested |
Untested |
Untested |
|
Serial |
Untested |
Untested |
Untested |
Untested |
|
Parallel |
Untested |
Untested |
Untested |
Untested |
|
External Monitor - VGA |
Yes, with manual Xorg configuration |
Untested |
YES |
Untested |
|
External Monitor - DVI |
No DVI connection |
No DVI connection |
No DVI connection |
Untested |
|
Modem |
Untested |
Untested |
No |
Untested |
|
NIC |
Untested |
Untested |
Untested |
Untested |
|
PS/2 |
Untested |
Untested |
Untested |
Untested |
|
Additional Hardware |
|||||
CD/DVD drive |
Yes (reads/writes) |
Yes (reads/writes) |
Yes (reads/writes) |
Yes (reads/writes) |
|
PCMCIA cards |
Untested |
Untested |
Untested |
Untested |
|
S-Video Port |
Untested |
Untested |
Untested |
Yes |
|
Card reader(s) |
Not working |
Mostly works |
Yes |
Yes |
|
Webcam |
Not working (but read below). |
Untested |
Yes with uvc driver |
Yes |
|
Function and other keys |
||||||
Fn key |
Operation |
Keycode |
Works? |
Bug # |
||
in Dapper (LTS) |
in Edgy |
in Gutsy (current stable) |
||||
+ Esc |
Stand by |
button/sleep SBTN 00000080 00000001 |
No |
Untested |
Yes |
|
+ F1 |
Hibernate |
|
Yes |
Untested |
Yes |
|
+ F3 |
Battery information |
|
Yes |
Yes |
Yes |
|
+ F4 |
Num Lock |
|
Yes |
Yes |
Yes |
|
+ F5 |
Scroll Lock |
|
No |
No |
Yes |
|
+ F8 |
CRT/LCD |
|
Yes |
Untested |
Yes |
|
+ F11 |
Capture screenshot |
|
Yes |
Yes |
Yes |
|
+ F12 |
Pause/Interrupt |
|
What's this? |
Untested |
Yes |
|
+ ArrowUp |
Brightness Up |
|
Yes |
No. Trying to adjust the brightness causes X Server to crash. Fixed by adding the line 'blacklist video' to /etc/modprobe.d/blacklist |
Yes |
|
Brightness Down |
|
Yes |
No. Trying to adjust the brightness causes X Server to crash. Fixed by adding the line 'blacklist video' to /etc/modprobe.d/blacklist |
Yes |
|
|
Other special keys |
||||||
Key |
Operation |
Keycode |
Works? |
Bug # |
||
in Dapper (current stable)? |
in Edgy |
in Gutsy (current stable) |
||||
CD/DVD Play/Pause |
|
|
Untested |
Untested |
Yes |
|
CD/DVD Prev Track |
|
|
Untested |
Untested |
Yes |
|
CD/DVD Next Track |
|
|
Untested |
Untested |
Yes |
|
CD/DVD Stop |
|
|
Untested |
Untested |
Yes |
|
Wireless On/Off |
|
|
Untested |
Yes |
Yes |
|
|
|
No |
Untested |
Yes |
|
|
Camera button |
|
|
Untested |
Untested |
Nothing appears to happen |
|
Notes
Dual core processor / SMP Kernel
When installing Ubuntu 6.06 (Dapper), a standard i386 kernel is installed, instead of a SMP one (this laptop has an Intel Core Duo processor). I had to install a SMP kernel and deinstall the one from the default install so that now linux sees the two cores:
[fernan@dell] uname -a Linux delia 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux [fernan@dell] cat /proc/cpuinfo | grep -c proc 2
NVidia / Intel graphics chipsets
This laptop has the option of either Intel GMA915 integrated graphics, or NVidia GO7400 graphics. The NVidia graphics work just as any other NVidia card does under Ubuntu. Default X configuration uses the nv driver. Installing the proprietary driver from multiverse-restricted enables hardware accelleration. The problems with the native 1280x800 screen resolution only apply to the Intel chipset. The NVidia chipset does not suffer from these problems.
xorg.conf (Intel)
The default installation worked out of the box, but the resolution was not set to the native (wide) resolution of the built-in LCD screen (1280x800) but to a square resolution instead (don't remember if it was 1024x768 or 1280x1024). I have manually edited the xorg.conf file and changed the 'Modes' lines to add more 'wide' resolutions:
Modes "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
Cycling through 'LCD only', 'LCD + CRT' and 'CRT only' works (Fn + F8), but given that I have set my screen to use a wide resolution (1280x800), and the CRT and/or projectors I've tried all expect more 'square' resolutions like 800x600, the switch results in either no image on the external monitor ('frequency out of range') or a bad image (disturbing refresh rate, badly placed image). I have not tried this with the dapper default resolution though ... I'm inclined to say that it should have worked ... but the truth is that in Windows XP, the default resolution is the native one (1280x800) and upon cycling using Fn+F8, the resolution is automatically changed to one that the external monitor accepts.
Built-in webcam
The laptop has a built-in webcam (mic and video). The device is detected (appears in lsusb), and upon running the Ekiga Configuration Assistant it records my voice and plays it back OK. The video works once uvc driver installed.
Wireless NIC
The built-in Intel Pro Wireless 3945ABG is not detected nor configured at install time because the required kernel module, daemon and other tools are not part of the default Dapper installation. To make the wireless NIC work, I had to install the linux-restricted modules.
Works out of the box with Edgy.
Built-in Card reader
The M1210 has a built-in card reader that accepts MMC, SD, Memory stick and a few other card formats. The built-in reader works in Windows XP (tested with a SD card and a Sony memory stick), but in Ubuntu cards inserted into the reader are not detected.
With Feisty, the card reader works (tested with SD card, automatically mounted).
A SD card is detected, and automatically mounted though, if it's inserted into an external card reader plugged into a USB port.
Also, if you build a new kernel (I tested this with a newer 2.6.17 kernel from kernel.org), and you build support for the reader into the kernel (as opposed to as a dynamically loaded kernel module), cards are detected and automatically mounted. In your kernel.config make sure you have:
# # MMC/SD Card support # CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y CONFIG_MMC_SDHCI=y CONFIG_MMC_WBSD=y
Palm Tungsten E (USB)
I have this PDA, and tried to configure gpilot to sync with it. But, when connecting the PDA and starting a 'sync' ubuntu does nothing ... /dev/pilot does not exist
lspci -v
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [5109]
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at eff8 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2
0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, fast devsel, latency 0
Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, fast devsel, latency 0, IRQ 233
Memory at dfebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: dfd00000-dfdfffff
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfa00000-dfcfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0100000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at bf80 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at bf60 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0, IRQ 50
I/O ports at bf40 [size=32]
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0, IRQ 58
I/O ports at bf20 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: df900000-df9fffff
Capabilities: [50] #0d [0000]
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] #09 [100c]
0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 80 [Master])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 177
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at bfa0 [size=16]
Capabilities: [70] Power Management version 2
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: Dell: Unknown device 01d7
Flags: medium devsel, IRQ 4
I/O ports at 10c0 [size=32]
0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, fast devsel, latency 64, IRQ 177
Memory at df9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
0000:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832 (prog-if 10 [OHCI])
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 64, IRQ 185
Memory at df9fd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
0000:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 64, IRQ 66
Memory at df9fd400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01)
Subsystem: Dell: Unknown device 01d7
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at df9fd500 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
Subsystem: Dell: Unknown device 01d7
Flags: medium devsel, IRQ 11
Memory at df9fd600 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
Subsystem: Dell: Unknown device 01d7
Flags: medium devsel, IRQ 11
Memory at df9fd700 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:0c:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
Subsystem: Intel Corporation: Unknown device 1020
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dfdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [e0] #10 [0011]lsusb
Bus 005 Device 002: ID 046d:08c6 Logitech, Inc. Bus 005 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000
dmesg
[17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000003f6a7400 (usable) [17179569.184000] BIOS-e820: 000000003f6a7400 - 0000000040000000 (reserved) [17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [17179569.184000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [17179569.184000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [17179569.184000] 118MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] On node 0 totalpages: 259751 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 30375 pages, LIFO batch:7 [17179569.184000] DMI 2.4 present. [17179569.184000] ACPI: RSDP (v000 DELL ) @ 0x000fc370 [17179569.184000] ACPI: RSDT (v001 DELL M07 0x27d6050b ASL 0x00000061) @ 0x3f6a7a96 [17179569.184000] ACPI: FADT (v001 DELL M07 0x27d6050b ASL 0x00000061) @ 0x3f6a8800 [17179569.184000] ACPI: MADT (v001 DELL M07 0x27d6050b ASL 0x00000047) @ 0x3f6a9000 [17179569.184000] ACPI: MCFG (v016 DELL M07 0x27d6050b ASL 0x00000061) @ 0x3f6a8fc0 [17179569.184000] ACPI: BOOT (v001 DELL M07 0x27d6050b ASL 0x00000061) @ 0x3f6a8bc0 [17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3f6a7ace [17179569.184000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [17179569.184000] Processor #1 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda6 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Detected 1664.819 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179571.912000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179571.912000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179571.936000] Memory: 1017712k/1039004k available (2110k kernel code, 20536k reserved, 595k data, 332k init, 121500k highmem) [17179571.936000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179572.016000] Calibrating delay using timer specific routine.. 3334.49 BogoMIPS (lpj=6668980) [17179572.016000] Security Framework v1.0.0 initialized [17179572.016000] SELinux: Disabled at boot. [17179572.016000] Mount-cache hash table entries: 512 [17179572.016000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179572.016000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179572.016000] monitor/mwait feature present. [17179572.016000] using mwait in idle threads. [17179572.016000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179572.016000] CPU: L2 cache: 2048K [17179572.016000] CPU: Hyper-Threading is disabled [17179572.016000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179572.016000] mtrr: v2.0 (20020519) [17179572.016000] Enabling fast FPU save and restore... done. [17179572.016000] Enabling unmasked SIMD FPU exception support... done. [17179572.016000] Checking 'hlt' instruction... OK. [17179572.032000] SMP alternatives: switching to UP code [17179572.032000] checking if image is initramfs... it is [17179572.632000] Freeing initrd memory: 6809k freed [17179572.652000] ACPI: Looking for DSDT ... not found! [17179572.656000] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [17179572.656000] SMP alternatives: switching to SMP code [17179572.656000] Booting processor 1/1 eip 3000 [17179572.664000] Initializing CPU#1 [17179572.748000] Calibrating delay using timer specific routine.. 3329.16 BogoMIPS (lpj=6658330) [17179572.748000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179572.748000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179572.748000] monitor/mwait feature present. [17179572.748000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179572.748000] CPU: L2 cache: 2048K [17179572.748000] CPU: Hyper-Threading is disabled [17179572.748000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179572.748000] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 [17179572.748000] Total of 2 processors activated (6663.65 BogoMIPS). [17179572.748000] ENABLING IO-APIC IRQs [17179572.748000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179572.892000] checking TSC synchronization across 2 CPUs: [17179572.892000] CPU#0 had 0 usecs TSC skew, fixed it up. [17179572.892000] CPU#1 had 0 usecs TSC skew, fixed it up. [17179572.896000] Brought up 2 CPUs [17179572.896000] NET: Registered protocol family 16 [17179572.896000] EISA bus registered [17179572.896000] ACPI: bus type pci registered [17179572.916000] PCI: PCI BIOS revision 2.10 entry at 0xfb4d6, last bus=14 [17179572.916000] PCI: Using MMCONFIG [17179572.916000] ACPI: Subsystem revision 20051216 [17179572.940000] ACPI: Interpreter enabled [17179572.940000] ACPI: Using IOAPIC for interrupt routing [17179572.944000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179572.944000] PCI: Probing PCI hardware (bus 00) [17179572.944000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179572.960000] Boot video device is 0000:00:02.0 [17179572.960000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [17179572.960000] PCI: Transparent bridge - 0000:00:1e.0 [17179572.960000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179572.984000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [17179572.984000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 [17179572.984000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [17179572.984000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [17179572.984000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179572.984000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [17179572.984000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [17179572.984000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179572.988000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [17179572.988000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [17179572.988000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [17179572.988000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [17179572.988000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179572.988000] pnp: PnP ACPI init [17179573.012000] pnp: PnP ACPI: found 10 devices [17179573.012000] PnPBIOS: Disabled by ACPI PNP [17179573.012000] PCI: Using ACPI for IRQ routing [17179573.012000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179573.080000] pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved [17179573.080000] pnp: 00:01: ioport range 0x1000-0x1005 could not be reserved [17179573.080000] pnp: 00:01: ioport range 0x1008-0x100f could not be reserved [17179573.080000] pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved [17179573.080000] pnp: 00:02: ioport range 0x1006-0x1007 has been reserved [17179573.080000] pnp: 00:02: ioport range 0x100a-0x1059 could not be reserved [17179573.080000] pnp: 00:02: ioport range 0x1060-0x107f has been reserved [17179573.080000] pnp: 00:02: ioport range 0x1080-0x10bf has been reserved [17179573.080000] pnp: 00:02: ioport range 0x10c0-0x10df has been reserved [17179573.080000] pnp: 00:07: ioport range 0xc80-0xcff has been reserved [17179573.080000] pnp: 00:07: ioport range 0x910-0x91f has been reserved [17179573.080000] pnp: 00:07: ioport range 0x920-0x92f has been reserved [17179573.080000] pnp: 00:07: ioport range 0x930-0x97f has been reserved [17179573.080000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [17179573.080000] PCI: Bridge: 0000:00:1c.0 [17179573.080000] IO window: disabled. [17179573.080000] MEM window: disabled. [17179573.080000] PREFETCH window: disabled. [17179573.080000] PCI: Bridge: 0000:00:1c.1 [17179573.080000] IO window: disabled. [17179573.080000] MEM window: dfd00000-dfdfffff [17179573.080000] PREFETCH window: disabled. [17179573.080000] PCI: Bridge: 0000:00:1c.3 [17179573.080000] IO window: d000-dfff [17179573.080000] MEM window: dfa00000-dfcfffff [17179573.080000] PREFETCH window: d0000000-d01fffff [17179573.080000] PCI: Bridge: 0000:00:1e.0 [17179573.080000] IO window: disabled. [17179573.080000] MEM window: df900000-df9fffff [17179573.080000] PREFETCH window: disabled. [17179573.080000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.080000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179573.080000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 [17179573.080000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179573.080000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 [17179573.080000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179573.080000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179573.080000] Simple Boot Flag at 0x79 set to 0x1 [17179573.080000] audit: initializing netlink socket (disabled) [17179573.080000] audit(1156625055.076:1): initialized [17179573.080000] highmem bounce pool size: 64 pages [17179573.080000] VFS: Disk quotas dquot_6.5.1 [17179573.080000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179573.080000] Initializing Cryptographic API [17179573.080000] io scheduler noop registered [17179573.080000] io scheduler anticipatory registered [17179573.080000] io scheduler deadline registered [17179573.080000] io scheduler cfq registered [17179573.080000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.080000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179573.080000] assign_interrupt_mode Found MSI capability [17179573.080000] Allocate Port Service[pcie00] [17179573.080000] Allocate Port Service[pcie02] [17179573.080000] Allocate Port Service[pcie03] [17179573.080000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 [17179573.080000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179573.080000] assign_interrupt_mode Found MSI capability [17179573.080000] Allocate Port Service[pcie00] [17179573.080000] Allocate Port Service[pcie02] [17179573.080000] Allocate Port Service[pcie03] [17179573.080000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 [17179573.080000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179573.080000] assign_interrupt_mode Found MSI capability [17179573.080000] Allocate Port Service[pcie00] [17179573.080000] Allocate Port Service[pcie02] [17179573.080000] Allocate Port Service[pcie03] [17179573.080000] isapnp: Scanning for PnP cards... [17179573.436000] isapnp: No Plug & Play device found [17179573.452000] Real Time Clock Driver v1.12 [17179573.452000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179573.456000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179573.456000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179573.456000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179573.456000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179573.456000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179573.456000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179573.460000] mice: PS/2 mouse device common for all mice [17179573.460000] EISA: Probing bus 0 at eisa.0 [17179573.460000] EISA: Cannot allocate resource for mainboard [17179573.460000] Cannot allocate resource for EISA slot 1 [17179573.460000] EISA: Detected 0 cards. [17179573.460000] NET: Registered protocol family 2 [17179573.464000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179573.508000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [17179573.508000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [17179573.508000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179573.508000] TCP: Hash tables configured (established 131072 bind 65536) [17179573.508000] TCP reno registered [17179573.508000] TCP bic registered [17179573.508000] NET: Registered protocol family 1 [17179573.508000] NET: Registered protocol family 8 [17179573.508000] NET: Registered protocol family 20 [17179573.508000] Starting balanced_irq [17179573.508000] Using IPI No-Shortcut mode [17179573.508000] ACPI wakeup devices: [17179573.508000] LID PBTN PCI0 USB0 USB1 USB2 USB3 EHCI AZAL PCIE RP01 RP02 RP03 RP04 RP05 RP06 [17179573.508000] ACPI: (supports S0 S3 S4 S5) [17179573.508000] Freeing unused kernel memory: 332k freed [17179573.556000] vga16fb: initializing [17179573.556000] vga16fb: mapped to 0xc00a0000 [17179573.668000] Console: switching to colour frame buffer device 80x25 [17179573.668000] fb0: VGA16 VGA frame buffer device [17179574.692000] Capability LSM initialized [17179574.760000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179574.760000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179574.760000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [17179574.760000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179574.764000] ACPI: Thermal Zone [THM] (58 C) [17179575.180000] SCSI subsystem initialized [17179575.184000] ACPI: bus type scsi registered [17179575.184000] libata version 1.20 loaded. [17179575.184000] ata_piix 0000:00:1f.2: version 1.05 [17179575.184000] ata_pci_init_one: pci_dev class+intf: 0x10180 [17179575.184000] ata_pci_init_one: NO_LEGACY == 0 [17179575.184000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177 [17179575.184000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179575.184000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 [17179575.348000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:be09 87:6063 88:203f 93:0000 [17179575.348000] ata1: dev 0 ATA-7, max UDMA/100, 153356490 sectors: LBA48 [17179575.348000] ata_acpi_push_id: skipping for PATA mode [17179575.348000] ata1: dev 0 configured for UDMA/100 [17179575.348000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179575.348000] pata_get_dev_handle: dev_handle: 0xdffe6360, parent_handle: 0xc1a09e40 [17179575.348000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xc1acfa00, *handle=0xdffe6360 [17179575.348000] do_drive_get_GTF: drive w/ adr=0: v: 0x00000000 [17179575.348000] scsi0 : ata_piix [17179575.348000] Vendor: ATA Model: FUJITSU MHV2080B Rev: 0085 [17179575.348000] Type: Direct-Access ANSI SCSI revision: 05 [17179575.348000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179575.348000] pata_get_dev_handle: dev_handle: 0xdffe6360, parent_handle: 0xc1a09e40 [17179575.348000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xc1acfa00, *handle=0xdffe6360 [17179575.348000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 [17179575.668000] ata2: dev 0 cfg 00:85c0 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407 93:0000 [17179575.668000] ata2: dev 0 ATAPI, max UDMA/33 [17179575.668000] ata_acpi_push_id: skipping for PATA mode [17179575.668000] ata2: dev 0 configured for UDMA/33 [17179575.668000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179575.668000] pata_get_dev_handle: dev_handle: 0xdffe6360, parent_handle: 0xc1a09e40 [17179575.668000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xc1acfa00, *handle=0xdffe6360 [17179575.668000] do_drive_get_GTF: drive w/ adr=0: v: 0x00000000 [17179575.668000] scsi1 : ata_piix [17179575.668000] Vendor: SONY Model: DVD+-RW DW-Q58A Rev: UDS1 [17179575.668000] Type: CD-ROM ANSI SCSI revision: 05 [17179575.668000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2' [17179575.668000] pata_get_dev_handle: dev_handle: 0xdffe6360, parent_handle: 0xc1a09e40 [17179575.668000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xc1acfa00, *handle=0xdffe6360 [17179575.676000] Driver 'sd' needs updating - please use bus_type methods [17179575.676000] SCSI device sda: 153356490 512-byte hdwr sectors (78519 MB) [17179575.676000] SCSI device sda: drive cache: write back [17179575.676000] SCSI device sda: 153356490 512-byte hdwr sectors (78519 MB) [17179575.676000] SCSI device sda: drive cache: write back [17179575.676000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [17179575.768000] sd 0:0:0:0: Attached scsi disk sda [17179577.392000] usbcore: registered new driver usbfs [17179577.392000] usbcore: registered new driver hub [17179577.404000] USB Universal Host Controller Interface driver v2.3 [17179577.404000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225 [17179577.404000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179577.404000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179577.404000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179577.404000] uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000bf80 [17179577.408000] hub 1-0:1.0: USB hub found [17179577.408000] hub 1-0:1.0: 2 ports detected [17179577.448000] ieee1394: Initialized config rom entry `ip1394' [17179577.512000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 233 [17179577.512000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179577.512000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179577.512000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179577.512000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000bf60 [17179577.512000] hub 2-0:1.0: USB hub found [17179577.512000] hub 2-0:1.0: 2 ports detected [17179577.616000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 50 [17179577.616000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179577.616000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179577.616000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179577.616000] uhci_hcd 0000:00:1d.2: irq 50, io base 0x0000bf40 [17179577.616000] hub 3-0:1.0: USB hub found [17179577.616000] hub 3-0:1.0: 2 ports detected [17179577.720000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 58 [17179577.720000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179577.720000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179577.720000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [17179577.720000] uhci_hcd 0000:00:1d.3: irq 58, io base 0x0000bf20 [17179577.720000] hub 4-0:1.0: USB hub found [17179577.720000] hub 4-0:1.0: 2 ports detected [17179577.824000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 225 [17179577.824000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179577.824000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179577.824000] ehci_hcd 0000:00:1d.7: debug port 1 [17179577.824000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179577.824000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [17179577.824000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xffa80000 [17179577.828000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179577.828000] hub 5-0:1.0: USB hub found [17179577.828000] hub 5-0:1.0: 8 ports detected [17179577.932000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org> [17179577.932000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 185 [17179577.984000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[df9fd800-df9fdfff] Max Packet=[2048] [17179578.008000] ide0: I/O resource 0x1F0-0x1F7 not free. [17179578.008000] ide0: ports already in use, skipping probe [17179578.008000] ide1: I/O resource 0x170-0x177 not free. [17179578.008000] ide1: ports already in use, skipping probe [17179578.156000] Attempting manual resume [17179578.216000] usb 5-5: new high speed USB device using ehci_hcd and address 2 [17179579.264000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[474fc000250f1541] [17179584.256000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [17179584.256000] Uniform CD-ROM driver Revision: 3.20 [17179584.256000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [17179584.416000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179584.416000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [17179584.556000] hw_random: RNG not detected [17179584.716000] Linux agpgart interface v0.101 (c) Dave Jones [17179584.828000] agpgart: Detected an Intel 945GM Chipset. [17179584.832000] agpgart: Detected 7932K stolen memory. [17179584.848000] agpgart: AGP aperture is 256M @ 0xc0000000 [17179585.012000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179585.260000] input: PC Speaker as /class/input/input1 [17179585.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179585.464000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [17179585.464000] sdhci: Copyright(c) Pierre Ossman [17179585.464000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 66 [17179585.512000] sdhci: ============== REGISTER DUMP ============== [17179585.512000] sdhci: Sys addr: 0x00000000 | Version: 0x00000200 [17179585.512000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [17179585.512000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [17179585.512000] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000 [17179585.512000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [17179585.512000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [17179585.512000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [17179585.512000] sdhci: Int enab: 0xe1ff00cf | Sig enab: 0xe1ff00cf [17179585.512000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [17179585.512000] sdhci: Caps: 0x01e021a1 | Max curr: 0x00000040 [17179585.512000] sdhci: =========================================== [17179585.564000] mmc0: SDHCI at 0xdf9fd400 irq 66 DMA [17179585.808000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000 [17179585.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [17179586.020000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179586.164000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 [17179586.164000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [17179586.300000] ts: Compaq touchscreen protocol output [17179586.504000] b44.c:v0.97 (Nov 30, 2005) [17179586.504000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177 [17179586.508000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:38:bd:44 [17179586.960000] ieee80211_crypt: registered algorithm 'NULL' [17179587.116000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179587.116000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [17179587.520000] usbcore: registered new driver snd-usb-audio [17179587.948000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 233 [17179587.948000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179588.132000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m [17179588.132000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [17179588.676000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 177 [17179588.676000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [17179588.676000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [17179588.896000] NET: Registered protocol family 17 [17179589.668000] lp: driver loaded but no devices found [17179589.704000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org> [17179589.704000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179589.704000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179589.740000] Adding 2048248k swap on /dev/sda5. Priority:-1 extents:1 across:2048248k [17179589.976000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179589.976000] md: bitmap version 4.39 [17179590.292000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [17179590.536000] cdrom: open failed. [17179590.720000] b44: eth0: Link is up at 100 Mbps, full duplex. [17179590.720000] b44: eth0: Flow control is on for TX and on for RX. [17179593.340000] drivers/usb/core/inode.c: usbfs: unrecognised mount option "none" or missing value [17179593.340000] [17179593.340000] drivers/usb/core/inode.c: usbfs: mount parameter error: [17179593.520000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17179593.580000] NTFS volume version 3.1. [17179596.384000] NET: Registered protocol family 10 [17179596.384000] lo: Disabled Privacy Extensions [17179596.388000] IPv6 over IPv4 tunneling driver [17179598.976000] ACPI: AC Adapter [AC] (on-line) [17179599.000000] ACPI: Battery Slot [BAT0] (battery present) [17179599.096000] ACPI: Lid Switch [LID] [17179599.096000] ACPI: Power Button (CM) [PBTN] [17179599.096000] ACPI: Sleep Button (CM) [SBTN] [17179599.180000] ibm_acpi: ec object not found [17179599.224000] pcc_acpi: loading... [17179599.324000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179599.324000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179599.324000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [17179602.744000] ppdev: user-space parallel port driver [17179603.248000] [drm] Initialized drm 1.0.1 20051102 [17179603.264000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179603.264000] [drm] Initialized i915 1.4.0 20060119 on minor 0 [17179603.324000] apm: BIOS not found. [17179606.744000] eth0: no IPv6 routers present [17179611.996000] Bluetooth: Core ver 2.8 [17179611.996000] NET: Registered protocol family 31 [17179611.996000] Bluetooth: HCI device and connection manager initialized [17179611.996000] Bluetooth: HCI socket layer initialized [17179612.004000] Bluetooth: L2CAP ver 2.8 [17179612.004000] Bluetooth: L2CAP socket layer initialized [17179612.020000] Bluetooth: RFCOMM socket layer initialized [17179612.020000] Bluetooth: RFCOMM TTY layer initialized [17179612.020000] Bluetooth: RFCOMM ver 1.7
Following is the configuration required for the TouchPad.
Install package xserver-xorg-input-synaptics
and have the following settings in xorg.conf
Section "InputDevice"
Identifier "Mouse1"
Driver "synaptics"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "SHMConfig" "on"LaptopTestingTeam/Old/DellXPSM1210 (last edited 2008-08-06 16:22:52 by localhost)