PDADeviceList
|
Size: 8570
Comment:
|
Size: 11724
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 3: | Line 3: |
| ||Vendor||Model||PIM sync||App Install||Sync software||Sync Method||Tested by||Comment|| ||<colspan=12>'''Handspring'''|| ||Handspring||Vizor||jpilot||pilot-xfer||pilot-xfer||USB||TresSeaver||USB using '/.dev/ttyUSB1' in the 'File | Preferences | Settings' dialog|| ||<colspan=12>'''Palm'''|| ||Vendor||Model||PIM sync||App Install||Sync software||Sync Method||Tested by||Comment|| ||Palm||Treo 650||Evolution||pilot-xfer||gnome-pilot||USB||KirtRunolfson||Have to do a pilot-xfer -l (after every reboot) before gnome-pilot will communicate. Use of new fields on palm will cause sync to crash. Inconsistant/buggy syncing when it doesn't crash.|| ||Palm||m100||jpilot||pilot-xfer||pilot-xfer||IrDA||PaulSladen||Haven't tried under Ubuntu...|| ||Palm|| m130 ||Evolution||gpilotd||gpilotd||USB||["Matthew5"]||I cannot get this to sync more than once per session in Dapper (6.06) and when I do it does a complete rewrite of the Palm info as if it needs a restore after a hard crash. Was working well in Breezy. See this [http://ubuntuforums.org/showthread.php?t=77387 forum page] for details|| ||Palm|| V ||JPilot||gnome-pilot||gnome-pilot||serial||AlexFerguson||Everything works great!|| ||PalmOne||Tungsten W||Evolution||Pilot applet (panel)||gpilotd||USB||MartijnVanDeStreek|||| ||PalmOne||Zire 71||Evolution||?||?||USB||Cliff Barbier||Simple when you use [EasyPalmDeviceSetup]|| ||Palm One|| Zire 31||Evolution||?||gpilot||USB||Ross Mayo||[http://www.ubuntulinux.org/wiki/PalmZire31HOWTO Palm Zire 31 HOWTO]|| ||Palm One|| Zire 21 (the cheap,white model)||Evolution||?||gpilot||USB||Maximilian Gerlach|| You need to have the applet running|| ||Palm||Tungsten E ||Kontact + KPilot ||KPilot ||KPilot ||USB /dev/ttyUSB1 (default?) ||Paul Cooke ||KPilot just start it up, wait a couple of seconds for it to moan about dev/ttyUSB1, turn your palm on and launch the hotsynch program on the palm, it works... I don't use Avantgo, I use Plucker and Plucker Desktop|| ||Palm||Tungsten E ||Evolution ||gpilotd-install-file ||Evolution ||USB ||Maximlian Gerlach ||Some conduits crash Evo. Plucker etc. works (after some tweaking). Lots of empty todos after sync, though :(|| ||PalmOne||IIIe||Evolution||Pilot applet (panel)||gpilot||serial||Leif||Todo list either fails, or adds dozens of empty todos.|| ||PalmOne||IIIe||jpilot||pilot-xfer||pilot-xfer||serial||Leif||Works fine|| ||Palm||T600||Kontact + Kpilot||Kpilot||KPilot||USB||Tcowing||Everything seems to work except for syncing an LDAP database in Kontact to the Palm. It will sync the first time, but then any additional changes are not synced. Also, the Copy PC to Palm option crashes KPilot when syncing addresses.|| ||Palm||Treo 600||Jpilot||pilot-xfer||pilot-xfer||USB||AndyBold||Everything seems to work OK, apart from backups. I have the IBM Java software installed. This causes pilot-xfer to crash due to some non-standard filenames in the IBM package. This is fixed in the current (2005-11-01) pilot-link 0.12-pre series but using that software with standard Ubuntu 5.10 packages causes the standard Ubuntu packages to fail in unexpected ways. File installations work OK.|| ||Palm||Treo 600||Evolution||gpilotd||gpilotd||USB||AndyBold||Synchronises most details OK. Contact/Todo/Calendar categories not sync'd from Treo to Evolution. (There is a bug report for this, almost 5 years old(!), about category syncing. Looks like it should be fixed soon. http://bugzilla.gnome.org/show_bug.cgi?id=201167) Backups not tested due to the filename compatability problem with pilot-link. File installations to RAM work OK via gpilot-install-file.|| ||PalmOne||LifeDrive||Evolution||gnome-pilot applet||gpilotd||USB and WiFi||BorgClown||Working ok with conduits eAdress, eCalendar, EToDo, Expense, Memofile, Time. Backup hangs midway. USB is using /dev/ttyUSB0 consistently. WiFi says it's using /dev/pilot, but doesn't really need it. Pretty good status overall.|| ||Palm||TX||Evolution||gnome-pilot applet||gpilotd||USB and WiFi|| ||have yet to try it out|| ||<colspan=12>'''PocketPC'''|| ||Vendor||Model||PIM sync||App Install||Sync software||Sync Method||Tested by||Comment|| ||Acer||N50 premium||Evolution||yes||synce with multisync||USB and WiFi|| alessandro.galli@gmail.com || you need synce 9.1; it build well on Hoary; you have to load ipaq module with ''modprobe ipaq vendor=0x045e product=0x00ce''; italians can find help at http://www.montellug.it/wiki/index.php/Connetti_PDA_Con_Linux || ||Hewlett-Packard||iPaq h1930 (2003)||own||?||none yet||USB||lluishc||module loads as HP Jornada 548 in /dev/ttyUSB0|| ||Compaq||iPaq 3970||synce||synce gnome plugins and gnomevfs fixes||synce and multisync self-builds with evolution||Bluetooth||Jon Dixon||synce builds well on Hoary, once the appropriate -dev packages are installed. Likewise, multisync. I built own due to wanting sync over bluetooth.|| ||O2||XDA2||none yet||?||none yet||USB||senectus||module loads as ipaq in hoary (essentially is an Ipaq with phone built in)|| ||Hewlett-Packard||iPaq h1940||synce||synce, multisync, evolution-plugin||Synce, multisync||USB (ttyUSB0)||["Dsas"]||loaded as ipaq module (hoary), multisync syncronises all data except notes + fields pocketpc doesn't support|| ||Toshiba||E355 PPC 2003||Evolution||Synce,Multisync,Raki||Synce,Multisync||USB||Billquinn1||Able to get everything to auto load in Kubuntu. Raki will auto detect if set up correctly. Had trouble with auto detect in gnome.|| ||<colspan=12>'''Symbian'''|| ||Vendor||Model||PIM sync||App Install||Sync software||Sync Method||Tested by||Comment|| ||<colspan=12>'''Others''' (please indicate particular device/make/model)|| ||Vendor||Model||PIM sync||App Install||Sync software||Sync Method||Tested by||Comment|| ||Sony||Clie PEG-NX70V/E||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||ChristopheCharlot||Gpilot needs to be manually stopped and restarted each time you want to sync. Evolution backup conduit crashes the sync. Evolution calendar conduit seems to be working (no crash) but after the first sync, there is no change on the palm on next syncs. Evolution has trouble handling multiple calendars. || ||Sony||Clie PEG-T665c||KPilot||KPilot||KPilot||USB /dev/ttyUSB0||NickCoulter||Gpilot won't work no matter what. From what I can track down, it's a code issue. Newer Clies need their vendor and product IDs hardcoded in gpilotd.c and then recompiled.|| ||Sony||Clie TJ35/E1||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||Nocturn||Everything seems to work OK, sometimes, the Evolution tasks conduit messes up resulting in loss of tasks on the pilot and/or the insertion of thousands of empty tasks (fixed by selecting 'copy-to-pilot').|| ||Sony||Clie TH55||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||Ryan||Sync works fine with Evolution and installing files. The Data Import flash-drive feature for the memory stick automounts but the connection is lost frequently making it unusuable.|| ||Alphasmart||Dana||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||Ryan||NOT WORKING. Sync doesn't work at all. Device is recognized as a usb-keyboard. The device Send feature works as it should, sending text to an open application as long as the keyboard layout is Qwerty. Dvorak users will need to toggle to Qwerty before sending text.|| ||Sony||Sony Ericsson P910i|| ? || ? || ? ||USB /dev/ttyUSBx||SebastianIvan||not working; SEMC DSS SyncStation is detected. The phone/PDA [http://www.sonyericsson.com/ Sony Ericsson P910i] is not detected.|| ||Sharp||Zaurus SL-C3100||Kontact||pi-sync||pi-sync||USB network device||GerApeldoorn||Works with [http://www.pi-sync.net pi-sync]. No synchronization with Evolution, just with Kontakt.|| ||Garmin||iQue 3600||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSB1||tomallen4||Works fine! The line in my /etc/udev/rules.d/10-custom.rules file reads: BUS="usb", SYSFS{product}="Garmin*", KERNEL="ttyUSB*", NAME{ignore_remove}="pilot", MODE="666"|| |
||<colspan=13>~+'''Handspring'''+~|| ||<:>'''Vendor'''||<:>'''Model'''||<:>'''OS Version'''||<:>'''PIM sync'''||<:>'''App Install'''||<:>'''Sync software'''||<:>'''Sync Method'''||<:>'''Tested by'''||<:>'''Comment'''|| ||Handspring||Vizor||?||jpilot||pilot-xfer||pilot-xfer||USB||TresSeaver||USB using '/.dev/ttyUSB1' in the 'File | Preferences | Settings' dialog|| ||<colspan=13>~+'''Palm'''+~|| ||<:>'''Vendor'''||<:>'''Model'''||<:>'''OS Version'''||<:>'''PIM sync'''||<:>'''App Install'''||<:>'''Sync software'''||<:>'''Sync Method'''||<:>'''Tested by'''||<:>'''Comment'''|| ||Palm One||Tungsten E2||5.4.0r23||JPilot||JPilot||JPilot||USB||["BruceM"]||'''Multi-lingual Version.''' Start the hotsync on the Palm; click the hotsync button in JPilot. If you are installing a program, the install screen will appear (again), close it; and the hotsync will continue.|| ||Palm||Treo 650||?||Evolution||pilot-xfer||gnome-pilot||USB||KirtRunolfson||Have to do a pilot-xfer -l (after every reboot) before gnome-pilot will communicate. Use of new fields on palm will cause sync to crash. Inconsistant/buggy syncing when it doesn't crash.|| ||Palm||m100||?||jpilot||pilot-xfer||pilot-xfer||IrDA||PaulSladen||Haven't tried under Ubuntu...|| ||Palm|| m130 ||PalmOS 4.1||Evolution||gpilotd||gpilotd||USB||["Matthew5"]||I cannot get this to sync more than once per session in Dapper (6.06) and when I do it does a complete rewrite of the Palm info as if it needs a restore after a hard crash. Was working well in Breezy. I have upgraded to Edgy and sync works perfectly with two little quirks: Evolution must not be open for syncing to work, and two copies of gnome-pilot open when the sync button is pressed on the palm. I can live with both.|| ||Palm|| V ||?||JPilot||gnome-pilot||gnome-pilot||serial||AlexFerguson||Everything works great!|| ||Palm|| V ||?||Evolution||gnome-pilot||gnome-pilot||serial||PeterWhittaker||Occasionally cannot connect post-resume (on LaptopTestingTeam/ThinkpadA20m)|| ||Palm|| V ||?||Evolution||gnome-pilot||gnome-pilot||irda||HillerD||device=/dev/ircomm0|| ||PalmOne||Tungsten W||?||Evolution||Pilot applet (panel)||gpilotd||USB||MartijnVanDeStreek|||| ||PalmOne||Zire 71||?||Evolution||?||?||USB||Cliff Barbier||Simple when you use [EasyPalmDeviceSetup]|| ||Palm One|| Zire 31||?||Evolution||?||gpilot||USB||Ross Mayo||[http://www.ubuntulinux.org/wiki/PalmZire31HOWTO Palm Zire 31 HOWTO]|| ||Palm One|| Zire 21 (the cheap,white model)||?||Evolution||?||gpilot||USB||Maximilian Gerlach|| You need to have the applet running|| ||PalmOne|| Z22 ||?|| Evolution || gpilotd || gpilotd || USB || RyanDeShone || [wiki:community/PalmZ22HowTo Palm Z22 How To]|| ||PalmOne||Z22||?||JPilot||JPilot||jpilotd||USB||RyanDeShone||Make sure to start the hotsync on the palm then click the hotsync button in JPilot and it works just fine|| ||Palm||Tungsten T ||?||Evolution ||gpilotd-install-file + gpilotd||Evolution ||USB ||JurianSluiman ||With Dapper it works half. Under Edgy everything works fine out-of-the-box: sync, backup and installation of files|| ||Palm||Tungsten E ||?||Kontact + KPilot ||KPilot ||KPilot ||USB /dev/ttyUSB1 (default?) ||Paul Cooke ||KPilot just start it up, wait a couple of seconds for it to moan about dev/ttyUSB1, turn your palm on and launch the hotsynch program on the palm, it works... I don't use Avantgo, I use Plucker and Plucker Desktop|| ||Palm||Tungsten E ||?||Evolution ||gpilotd-install-file ||Evolution ||USB ||Maximlian Gerlach ||Some conduits crash Evo. Plucker etc. works (after some tweaking). Lots of empty todos after sync, though :(|| ||PalmOne||IIIe||?||Evolution||Pilot applet (panel)||gpilot||serial||Leif||Todo list either fails, or adds dozens of empty todos.|| ||PalmOne||IIIe||?||jpilot||pilot-xfer||pilot-xfer||serial||Leif||Works fine|| ||Palm||T600||?||Kontact + Kpilot||Kpilot||KPilot||USB||Tcowing||Everything seems to work except for syncing an LDAP database in Kontact to the Palm. It will sync the first time, but then any additional changes are not synced. Also, the Copy PC to Palm option crashes KPilot when syncing addresses.|| ||Palm||Treo 600||?||Jpilot||pilot-xfer||pilot-xfer||USB||AndyBold||Everything seems to work OK, apart from backups. I have the IBM Java software installed. This causes pilot-xfer to crash due to some non-standard filenames in the IBM package. This is fixed in the current (2005-11-01) pilot-link 0.12-pre series but using that software with standard Ubuntu 5.10 packages causes the standard Ubuntu packages to fail in unexpected ways. File installations work OK.|| ||Palm||Treo 600||?||Evolution||gpilotd||gpilotd||USB||AndyBold||Synchronises most details OK. Contact/Todo/Calendar categories not sync'd from Treo to Evolution. (There is a bug report for this, almost 5 years old(!), about category syncing. Looks like it should be fixed soon. http://bugzilla.gnome.org/show_bug.cgi?id=201167) Backups not tested due to the filename compatability problem with pilot-link. File installations to RAM work OK via gpilot-install-file.|| ||PalmOne||LifeDrive||?||Evolution||gnome-pilot applet||gpilotd||USB and WiFi||BorgClown||Working ok with conduits eAdress, eCalendar, EToDo, Expense, Memofile, Time. Backup hangs midway. USB is using /dev/ttyUSB0 consistently. WiFi says it's using /dev/pilot, but doesn't really need it. Pretty good status overall.|| ||PalmOne||T5||?||Evolution||gnome-pilot applet||gpilotd||USB and Bluetooth||[wiki:pereira Pereira]|| works perfectly edgy || ||Palm||TX||?||Evolution||gnome-pilot applet||gpilotd||USB and WiFi|| ||have yet to try it out|| ||Palm||TX||?||Evolution||gnome-pilot applet||gpilotd||USB and WiFi|| || needs ~/.gnome2/gnome-pilot.d/backup-conduit to contain exclude_files=WiFiCoreLib to prevent sync crashing / hanging - works perfectly dapper/edgy || ||Palm||TX||?||Evolution||gnome-pilot applet||gpilotd||USB and Bluetooth||[wiki:pereira Pereira]|| works perfectly edgy || ||Palm||TX||?||Kontact/Kmail||kpilot||kpilot||WiFi||[wiki:Bonbonthejon BonBonTheJon]|| || ||PalmOne || Tungsten E2 ||Garnet v.5.4.7.|| Evolution || gnome-pilot || gnome-pilot || USB || [https://wiki.ubuntu.com/FlaviusCopaciu FlaviusCopaciu] || Tested with the folowing conduits: EAdress, ECalendar, EMemos, EToDo. The device is running Palm OS Garnet v.5.4.7. || ||PalmOne||LifeDrive||?||Evolution||gnome-pilot applet||gpilotd||USB and WiFi||BruceCowan||Fine with Backup, EAddress, ECalendar, EMemos and Time. Backup works after ~/.gnome2/gnome-pilot.d/backup-conduit is edited to contain exclude_files=WiFiCoreLib|| ||<colspan=13>~+'''PocketPC'''+~|| ||<:>'''Vendor'''||<:>'''Model'''||<:>'''OS Version'''||<:>'''PIM sync'''||<:>'''App Install'''||<:>'''Sync software'''||<:>'''Sync Method'''||<:>'''Tested by'''||<:>'''Comment'''|| ||Acer||N50 premium||?||Evolution||yes||synce with multisync||USB and WiFi|| alessandro.galli@gmail.com || you need synce 9.1; it build well on Hoary; you have to load ipaq module with ''modprobe ipaq vendor=0x045e product=0x00ce''; italians can find help at http://www.montellug.it/wiki/index.php/Connetti_PDA_Con_Linux || ||Hewlett-Packard||iPaq h1930 (2003)||?||own||?||none yet||USB||lluishc||module loads as HP Jornada 548 in /dev/ttyUSB0|| ||Compaq||iPaq 3970||?||synce||synce gnome plugins and gnomevfs fixes||synce and multisync self-builds with evolution||Bluetooth||Jon Dixon||synce builds well on Hoary, once the appropriate -dev packages are installed. Likewise, multisync. I built own due to wanting sync over bluetooth.|| ||O2||XDA2||?||none yet||?||none yet||USB||senectus||module loads as ipaq in hoary (essentially is an Ipaq with phone built in)|| ||Hewlett-Packard||iPaq h1940||?||synce||synce, multisync, evolution-plugin||Synce, multisync||USB (ttyUSB0)||DeanSas||loaded as ipaq module (hoary), multisync syncronises all data except notes + fields pocketpc doesn't support|| ||Hewlett-Packard||iPaq 4150 ||PocketPC 2003||synce||synce, multisync, evolution-plugin||Synce,Multisync||USB (ttyUSB0)||["Dawid71"]||Modules loads as iPaq perfectly on Feisty. Syncs Calendar, Tasks & Addressbook without any problems.|| ||Toshiba||E355 PPC 2003||?||Evolution||Synce,Multisync,Raki||Synce,Multisync||USB||Billquinn1||Able to get everything to auto load in Kubuntu. Raki will auto detect if set up correctly. Had trouble with auto detect in gnome.|| ||<colspan=13>~+'''Sony'''+~|| ||<:>'''Vendor'''||<:>'''Model'''||<:>'''OS Version'''||<:>'''PIM sync'''||<:>'''App Install'''||<:>'''Sync software'''||<:>'''Sync Method'''||<:>'''Tested by'''||<:>'''Comment'''|| ||Sony||Clie PEG-NX70V/E||?||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||ChristopheCharlot||Gpilot needs to be manually stopped and restarted each time you want to sync. Evolution backup conduit crashes the sync. Evolution calendar conduit seems to be working (no crash) but after the first sync, there is no change on the palm on next syncs. Evolution has trouble handling multiple calendars. || ||Sony||Clie PEG-T665c||?||KPilot||KPilot||KPilot||USB /dev/ttyUSB0||NickCoulter||Gpilot won't work no matter what. From what I can track down, it's a code issue. Newer Clies need their vendor and product IDs hardcoded in gpilotd.c and then recompiled.|| ||Sony||Clie TJ35/E1||?||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||Nocturn||Everything seems to work OK, sometimes, the Evolution tasks conduit messes up resulting in loss of tasks on the pilot and/or the insertion of thousands of empty tasks (fixed by selecting 'copy-to-pilot').|| ||Sony||Clie TH55||?||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||Ryan||Sync works fine with Evolution and installing files. The Data Import flash-drive feature for the memory stick automounts but the connection is lost frequently making it unusuable.|| ||Sony||Sony Ericsson P910i||?|| ? || ? || ? ||USB /dev/ttyUSBx||SebastianIvan||not working; SEMC DSS SyncStation is detected. The phone/PDA [http://www.sonyericsson.com/ Sony Ericsson P910i] is not detected.|| ||<colspan=13>~+'''Others'''+~ (please indicate particular device/make/model)|| ||<:>'''Vendor'''||<:>'''Model'''||<:>'''OS Version'''||<:>'''PIM sync'''||<:>'''App Install'''||<:>'''Sync software'''||<:>'''Sync Method'''||<:>'''Tested by'''||<:>'''Comment'''|| ||Alphasmart||Dana||?||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSBx||Ryan||NOT WORKING. Sync doesn't work at all. Device is recognized as a usb-keyboard. The device Send feature works as it should, sending text to an open application as long as the keyboard layout is Qwerty. Dvorak users will need to toggle to Qwerty before sending text.|| ||Sharp||Zaurus SL-C3100||?||Kontact||pi-sync||pi-sync||USB network device||GerApeldoorn||Works with [http://www.pi-sync.net pi-sync]. No synchronization with Evolution, just with Kontakt.|| ||Garmin||iQue 3600||?||gnome-pilot||gnome-pilot||gnome-pilot||USB /dev/ttyUSB1||tomallen4||Works fine! The line in my /etc/udev/rules.d/10-custom.rules file reads: BUS="usb", SYSFS{product}="Garmin*", KERNEL="ttyUSB*", NAME{ignore_remove}="pilot", MODE="666"|| |
| Line 50: | Line 63: |
| OS Version section added, have fun |
Please refer to [https://wiki.ubuntu.com/Testing/PDA?highlight=%28Testing%2FPDA%29 Testing/PDA] before adding entries to this page. Make sure all fields have relevant entries. If you're not sure if it works, indicate so with details. Other observations can be included in the Comment column.
Handspring |
||||||||||||
Vendor |
Model |
OS Version |
PIM sync |
App Install |
Sync software |
Sync Method |
Tested by |
Comment |
||||
Handspring |
Vizor |
? |
jpilot |
pilot-xfer |
pilot-xfer |
USB |
USB using '/.dev/ttyUSB1' in the 'File | Preferences | Settings' dialog |
|||||
Palm |
||||||||||||
Vendor |
Model |
OS Version |
PIM sync |
App Install |
Sync software |
Sync Method |
Tested by |
Comment |
||||
Palm One |
Tungsten E2 |
5.4.0r23 |
JPilot |
JPilot |
JPilot |
USB |
["BruceM"] |
Multi-lingual Version. Start the hotsync on the Palm; click the hotsync button in JPilot. If you are installing a program, the install screen will appear (again), close it; and the hotsync will continue. |
||||
Palm |
Treo 650 |
? |
Evolution |
pilot-xfer |
gnome-pilot |
USB |
Have to do a pilot-xfer -l (after every reboot) before gnome-pilot will communicate. Use of new fields on palm will cause sync to crash. Inconsistant/buggy syncing when it doesn't crash. |
|||||
Palm |
m100 |
? |
jpilot |
pilot-xfer |
pilot-xfer |
IrDA |
Haven't tried under Ubuntu... |
|||||
Palm |
m130 |
PalmOS 4.1 |
Evolution |
gpilotd |
gpilotd |
USB |
["Matthew5"] |
I cannot get this to sync more than once per session in Dapper (6.06) and when I do it does a complete rewrite of the Palm info as if it needs a restore after a hard crash. Was working well in Breezy. I have upgraded to Edgy and sync works perfectly with two little quirks: Evolution must not be open for syncing to work, and two copies of gnome-pilot open when the sync button is pressed on the palm. I can live with both. |
||||
Palm |
V |
? |
JPilot |
gnome-pilot |
gnome-pilot |
serial |
Everything works great! |
|||||
Palm |
V |
? |
Evolution |
gnome-pilot |
gnome-pilot |
serial |
Occasionally cannot connect post-resume (on LaptopTestingTeam/ThinkpadA20m) |
|||||
Palm |
V |
? |
Evolution |
gnome-pilot |
gnome-pilot |
irda |
HillerD |
device=/dev/ircomm0 |
||||
Tungsten W |
? |
Evolution |
Pilot applet (panel) |
gpilotd |
USB |
|||||||
Zire 71 |
? |
Evolution |
? |
? |
USB |
Cliff Barbier |
Simple when you use [EasyPalmDeviceSetup] |
|||||
Palm One |
Zire 31 |
? |
Evolution |
? |
gpilot |
USB |
Ross Mayo |
[http://www.ubuntulinux.org/wiki/PalmZire31HOWTO Palm Zire 31 HOWTO] |
||||
Palm One |
Zire 21 (the cheap,white model) |
? |
Evolution |
? |
gpilot |
USB |
Maximilian Gerlach |
You need to have the applet running |
||||
Z22 |
? |
Evolution |
gpilotd |
gpilotd |
USB |
[wiki:community/PalmZ22HowTo Palm Z22 How To] |
||||||
Z22 |
? |
JPilot |
JPilot |
jpilotd |
USB |
Make sure to start the hotsync on the palm then click the hotsync button in JPilot and it works just fine |
||||||
Palm |
Tungsten T |
? |
Evolution |
gpilotd-install-file + gpilotd |
Evolution |
USB |
With Dapper it works half. Under Edgy everything works fine out-of-the-box: sync, backup and installation of files |
|||||
Palm |
Tungsten E |
? |
Kontact + KPilot |
KPilot |
KPilot |
USB /dev/ttyUSB1 (default?) |
Paul Cooke |
KPilot just start it up, wait a couple of seconds for it to moan about dev/ttyUSB1, turn your palm on and launch the hotsynch program on the palm, it works... I don't use Avantgo, I use Plucker and Plucker Desktop |
||||
Palm |
Tungsten E |
? |
Evolution |
gpilotd-install-file |
Evolution |
USB |
Maximlian Gerlach |
Some conduits crash Evo. Plucker etc. works (after some tweaking). Lots of empty todos after sync, though :( |
||||
IIIe |
? |
Evolution |
Pilot applet (panel) |
gpilot |
serial |
Leif |
Todo list either fails, or adds dozens of empty todos. |
|||||
IIIe |
? |
jpilot |
pilot-xfer |
pilot-xfer |
serial |
Leif |
Works fine |
|||||
Palm |
T600 |
? |
Kontact + Kpilot |
Kpilot |
KPilot |
USB |
Tcowing |
Everything seems to work except for syncing an LDAP database in Kontact to the Palm. It will sync the first time, but then any additional changes are not synced. Also, the Copy PC to Palm option crashes KPilot when syncing addresses. |
||||
Palm |
Treo 600 |
? |
Jpilot |
pilot-xfer |
pilot-xfer |
USB |
Everything seems to work OK, apart from backups. I have the IBM Java software installed. This causes pilot-xfer to crash due to some non-standard filenames in the IBM package. This is fixed in the current (2005-11-01) pilot-link 0.12-pre series but using that software with standard Ubuntu 5.10 packages causes the standard Ubuntu packages to fail in unexpected ways. File installations work OK. |
|||||
Palm |
Treo 600 |
? |
Evolution |
gpilotd |
gpilotd |
USB |
Synchronises most details OK. Contact/Todo/Calendar categories not sync'd from Treo to Evolution. (There is a bug report for this, almost 5 years old(!), about category syncing. Looks like it should be fixed soon. http://bugzilla.gnome.org/show_bug.cgi?id=201167) Backups not tested due to the filename compatability problem with pilot-link. File installations to RAM work OK via gpilot-install-file. |
|||||
? |
Evolution |
gnome-pilot applet |
gpilotd |
USB and WiFi |
Working ok with conduits eAdress, eCalendar, EToDo, Expense, Memofile, Time. Backup hangs midway. USB is using /dev/ttyUSB0 consistently. WiFi says it's using /dev/pilot, but doesn't really need it. Pretty good status overall. |
|||||||
T5 |
? |
Evolution |
gnome-pilot applet |
gpilotd |
USB and Bluetooth |
[wiki:pereira Pereira] |
works perfectly edgy |
|||||
Palm |
TX |
? |
Evolution |
gnome-pilot applet |
gpilotd |
USB and WiFi |
|
have yet to try it out |
||||
Palm |
TX |
? |
Evolution |
gnome-pilot applet |
gpilotd |
USB and WiFi |
|
needs ~/.gnome2/gnome-pilot.d/backup-conduit to contain exclude_files=WiFiCoreLib to prevent sync crashing / hanging - works perfectly dapper/edgy |
||||
Palm |
TX |
? |
Evolution |
gnome-pilot applet |
gpilotd |
USB and Bluetooth |
[wiki:pereira Pereira] |
works perfectly edgy |
||||
Palm |
TX |
? |
Kontact/Kmail |
kpilot |
kpilot |
[wiki:Bonbonthejon BonBonTheJon] |
|
|||||
Tungsten E2 |
Garnet v.5.4.7. |
Evolution |
gnome-pilot |
gnome-pilot |
USB |
Tested with the folowing conduits: EAdress, ECalendar, EMemos, EToDo. The device is running Palm OS Garnet v.5.4.7. |
||||||
? |
Evolution |
gnome-pilot applet |
gpilotd |
USB and WiFi |
Fine with Backup, EAddress, ECalendar, EMemos and Time. Backup works after ~/.gnome2/gnome-pilot.d/backup-conduit is edited to contain exclude_files=WiFiCoreLib |
|||||||
PocketPC |
||||||||||||
Vendor |
Model |
OS Version |
PIM sync |
App Install |
Sync software |
Sync Method |
Tested by |
Comment |
||||
Acer |
N50 premium |
? |
Evolution |
yes |
synce with multisync |
USB and WiFi |
you need synce 9.1; it build well on Hoary; you have to load ipaq module with modprobe ipaq vendor=0x045e product=0x00ce; italians can find help at http://www.montellug.it/wiki/index.php/Connetti_PDA_Con_Linux |
|||||
Hewlett-Packard |
iPaq h1930 (2003) |
? |
own |
? |
none yet |
USB |
lluishc |
module loads as HP Jornada 548 in /dev/ttyUSB0 |
||||
Compaq |
iPaq 3970 |
? |
synce |
synce gnome plugins and gnomevfs fixes |
synce and multisync self-builds with evolution |
Bluetooth |
Jon Dixon |
synce builds well on Hoary, once the appropriate -dev packages are installed. Likewise, multisync. I built own due to wanting sync over bluetooth. |
||||
O2 |
XDA2 |
? |
none yet |
? |
none yet |
USB |
senectus |
module loads as ipaq in hoary (essentially is an Ipaq with phone built in) |
||||
Hewlett-Packard |
iPaq h1940 |
? |
synce |
synce, multisync, evolution-plugin |
Synce, multisync |
USB (ttyUSB0) |
loaded as ipaq module (hoary), multisync syncronises all data except notes + fields pocketpc doesn't support |
|||||
Hewlett-Packard |
iPaq 4150 |
PocketPC 2003 |
synce |
synce, multisync, evolution-plugin |
Synce,Multisync |
USB (ttyUSB0) |
["Dawid71"] |
Modules loads as iPaq perfectly on Feisty. Syncs Calendar, Tasks & Addressbook without any problems. |
||||
Toshiba |
E355 PPC 2003 |
? |
Evolution |
Synce,Multisync,Raki |
Synce,Multisync |
USB |
Billquinn1 |
Able to get everything to auto load in Kubuntu. Raki will auto detect if set up correctly. Had trouble with auto detect in gnome. |
||||
Sony |
||||||||||||
Vendor |
Model |
OS Version |
PIM sync |
App Install |
Sync software |
Sync Method |
Tested by |
Comment |
||||
Sony |
Clie PEG-NX70V/E |
? |
gnome-pilot |
gnome-pilot |
gnome-pilot |
USB /dev/ttyUSBx |
Gpilot needs to be manually stopped and restarted each time you want to sync. Evolution backup conduit crashes the sync. Evolution calendar conduit seems to be working (no crash) but after the first sync, there is no change on the palm on next syncs. Evolution has trouble handling multiple calendars. |
|||||
Sony |
Clie PEG-T665c |
? |
KPilot |
KPilot |
KPilot |
USB /dev/ttyUSB0 |
Gpilot won't work no matter what. From what I can track down, it's a code issue. Newer Clies need their vendor and product IDs hardcoded in gpilotd.c and then recompiled. |
|||||
Sony |
Clie TJ35/E1 |
? |
gnome-pilot |
gnome-pilot |
gnome-pilot |
USB /dev/ttyUSBx |
Nocturn |
Everything seems to work OK, sometimes, the Evolution tasks conduit messes up resulting in loss of tasks on the pilot and/or the insertion of thousands of empty tasks (fixed by selecting 'copy-to-pilot'). |
||||
Sony |
Clie TH55 |
? |
gnome-pilot |
gnome-pilot |
gnome-pilot |
USB /dev/ttyUSBx |
Ryan |
Sync works fine with Evolution and installing files. The Data Import flash-drive feature for the memory stick automounts but the connection is lost frequently making it unusuable. |
||||
Sony |
Sony Ericsson P910i |
? |
? |
? |
? |
USB /dev/ttyUSBx |
not working; SEMC DSS SyncStation is detected. The phone/PDA [http://www.sonyericsson.com/ Sony Ericsson P910i] is not detected. |
|||||
Others (please indicate particular device/make/model) |
||||||||||||
Vendor |
Model |
OS Version |
PIM sync |
App Install |
Sync software |
Sync Method |
Tested by |
Comment |
||||
Alphasmart |
Dana |
? |
gnome-pilot |
gnome-pilot |
gnome-pilot |
USB /dev/ttyUSBx |
Ryan |
NOT WORKING. Sync doesn't work at all. Device is recognized as a usb-keyboard. The device Send feature works as it should, sending text to an open application as long as the keyboard layout is Qwerty. Dvorak users will need to toggle to Qwerty before sending text. |
||||
Sharp |
Zaurus SL-C3100 |
? |
Kontact |
pi-sync |
pi-sync |
USB network device |
Works with [http://www.pi-sync.net pi-sync]. No synchronization with Evolution, just with Kontakt. |
|||||
Garmin |
iQue 3600 |
? |
gnome-pilot |
gnome-pilot |
gnome-pilot |
USB /dev/ttyUSB1 |
tomallen4 |
Works fine! The line in my /etc/udev/rules.d/10-custom.rules file reads: BUS="usb", SYSFS{product}="Garmin*", KERNEL="ttyUSB*", NAME{ignore_remove}="pilot", MODE="666" |
||||
Might not be a bad idea to add OS Version for Palm OS based devices. It will give us a better idea which versions need work.
I second the idea of adding OS version. If a space is made or a standard for posting it communicated I'll add the info to my entry.
OS Version section added, have fun
["CategoryPDA"]
PDADeviceList (last edited 2008-08-06 16:28:01 by localhost)