seiflotfy

Differences between revisions 3 and 13 (spanning 10 versions)
⇤ ← Revision 3 as of 2006-11-12 13:09:11 →
Size: 1539
Editor: p50877A40
Comment:
← Revision 13 as of 2008-08-06 16:17:33 → ⇥
Size: 42
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
'''Howto install Hauppauge WinTV HVR 1100 under Ubuntu(Edgy)'''

This howto is for installing Hauppuage WinTV HVR 1100 under Ubuntu
"might work for other wintv cards" no guarantee though...
I used this froum its in french though --> http://forum.ubuntu-fr.org/viewtopic.php?id=73834&p=1

Here we go
first check if your card got detected
{{{lspci}}}
you should get something like:
{{{0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
        Subsystem: Hauppauge computer works Inc.: Unknown device 6701
        Flags: bus master, medium devsel, latency 32, IRQ 12
        Memory at eb101000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2}}}

first make sure you have the packacges required for the configuration of the Card
open a console and type:
{{sudo apt-get install build-essential mercurial linux-headers-`uname -r` dvb-utils}}

then get the v4l-dvb files:
{{{cd /opt/
hg clone http://linuxtv.org/hg/v4l-dvb||
cd v4l-dvb
make
sudo make install
sudo -s}}}

do:
{{{sudo modprobe -r saa7134-alsa saa7134-dvb saa7134 && sudo modprobe saa7134 card=101 && sudo modprobe saa7134-dvb}}}
then:
{{{echo "saa7134-dvb" >> /etc/modules}}}

now get the frimware compatible with your card from
http://thadathil.net:8000/dvb/
then "sudo" copy it to
/lib/firmware/2.6.17-10-generic/

{{{sudo reboot
}}}

I think that was it
now it is installed soon i will write another howto for scanning channels...
:)

 		 [[../]]https://wiki.ubuntu.com/SeifLotfy

../https://wiki.ubuntu.com/SeifLotfy

seiflotfy (last edited 2008-08-06 16:17:33 by localhost)