General

State of things

Installation

Using your own custom recovery (CWM or TWRP):

• 1: Make a nandroid backup
  2: Do a factory reset (Wipe Data/Cache, some have not had luck after wiping system)
  3: Install toroplus_ubuntu.zip from forum post.
  4: Install quantal-preinstalled-phablet-armhf.zip from forum post or Ubuntu mirror (link below).
  

  • -This step will take a long time, don't worry unless you see errors.
    

  5: Reboot system.
  

Unlocking instructions

NOTE: This will delete all data on the phone (most of the time, you may luck out, but don't count on it). This includes your "SDCard" space (or, more properly, your /data/media/ space). As such, you should make proper backups.

NOTE: This may void your warranty. You will see a more specific warning as you unlock, but you are choosing to do this on your own, and you are responsible for any damage done to your device as a result.

REQUIREMENTS:

• 1: Android SDK (Can be found here, along with installation instructions: http://developer.android.com/sdk/index.html )

Reboot phone into bootloader mode:

• 1: Turn off phone.
  2: Hold down both volume buttons and press the power button until the phone vibrates.
  3: You will see an Android, and a large box with an arrow pointing to the right (towards your power button) which says START. You are now in bootloader mode. If you use the volume up/down buttons, you can choose to boot into recovery, among other options. For now, you will stay in bootloader mode.
  

Unlock using Fastboot (included in the Android SDK tools)

• 4: With the phone in bootloader mode, plug phone into computer using a microUSB cable.
  5: In a terminal or command prompt on the computer, navigate to the directory which you stored the Android SDK, and into the platform-tools directory (If you have the SDK binaries in your path, you don't need to worry about this).
  6: For Linux & Mac:
  

  • ./fastboot oem unlock
    or, if the Tools are in your path,
    fastboot oem unlock
    For Windows:
    fastboot.exe oem unlock
    
    

  7: At this point, your phone will show a dialog, asking you to confirm that you want to unlock the device, it will show a warning. Make your own decision.
  8: If you decide to proceed, you can use the volume buttons to highlight "yes" and then press the power button to select it.
  

Your device is unlocked. If you download a .img of ClockworkMod Recovery or TeamWin Recovery Project, you can flash it with fastboot:fastboot flash recovery <recovery.img>

link to images

Known issues

The image

How to build it

Please give some instructions on how you build the image.

Redistributability

Are all parts of the image freely redistributable?