This page details the processes for the Ubuntu Package Archive Administrators team, and hopefully provides a decent guide for new members of the team.

Bugs should be filed against the appropriate packages, and the team subscribed (not assigned) to the bug.

The requests can be found at https://launchpad.net/~ubuntu-archive/+subscribedbugs.

Team members may assign bugs to themselves and mark them In Progress if they're working on them, or discussing them; to act as a lock on that request.

1. Logging In

All administration is performed on cocoplum.canonical.com, accounts are provided to members of the team. Changes can only be made as the lp_archive user, to which you'll have sudo access.

So to begin:

• $ ssh cocoplum
  $ sudo -u lp_archive -i

The -i is important as lp_archive's .bashrc sets the right environment variables and makes sure the directory with all of the tools is placed in the PATH.

IMPORTANT: This document uses $SUDO_USER in several places. If your cocoplum.canonical.com uid is not that same as your Launchpad id, be sure to use your Launchpad id when running Launchpad related scripts.

2. NEW Processing

Both source packages and new binaries which have not yet been approved are not automatically accepted into the archive, but are instead held for checking and manual acceptance. Once accepted they'll be automatically approved from then on.

The current queue can be obtained with:

• $ queue info

This is the NEW queue for ubuntu/feisty by default; you can change the queue with -Q, the distro with -D and the release using -s. To list the UNAPPROVED queue for ubuntu/edgy, for example:

• $ queue -s edgy -Q unapproved info

Packages are placed in the UNAPPROVED queue if they're uploaded to a closed distribution, and are usually security updates or similar; this should be checked with the uploader.

You can give an string argument after info which is interpreted as a substring match filter.

To obtain a report of the size of all the different queues for a particular release:

• $ queue report

Back to the NEW queue for now, however. You'll see output that looks somewhat like this:

• $ queue info
   Listing ubuntu/dapper (NEW) 4/4
  ---------|----|----------------------|----------------------|---------------
     25324 | S- | diveintopython-zh    | 5.4-0ubuntu1         | three minutes
           | * diveintopython-zh/5.4-0ubuntu1 Component: main Section: doc
     25276 | -B | language-pack-kde-co | 1:6.06+20060427      | 2 hours 20 minutes
           | * language-pack-kde-co-base/1:6.06+20060427/i386 Component: main Section: translations Priority: OPTIONAL
     23635 | -B | upbackup (i386)      | 0.0.1                | two days
           | * upbackup/0.0.1/i386 Component: main Section: admin Priority: OPTIONAL
           | * upbackup_0.0.1_i386_translations.tar.gz Format: ROSETTA_TRANSLATIONS
     23712 | S- | gausssum             | 1.0.3-2ubuntu1       | 45 hours
           | * gausssum/1.0.3-2ubuntu1 Component: main Section: science
  ---------|----|----------------------|----------------------|---------------
                                                                 4/4 total

The number at the start can be used with other commands instead of referring to a package by name. The next field shows you what is actually in the queue, "S-" means it's a new source and "-B" means it's a new binary. You then have the package name, the version and how long it's been in the queue.

New sources need to be checked to make sure they're well packaged, the licence details are correct and permissible for us to redistribute, etc. See PackagingGuide/Basic#NewPackages, PackagingGuide/Basic#Copyright and Debian's Reject FAQ. You can fetch a package from the queue for manual checking, be sure to do this in a directory of your own:

• $ mkdir /tmp/$SUDO_USER
  $ cd /tmp/$SUDO_USER
  
  $ queue fetch 25324

The source is now in the current directory and ready for checking. Any problems should result in the rejection of the package (also send a mail to the uploader explaining the reason and Cc ubuntu-archive@lists.ubuntu.com):

• $ queue reject 25324

If the package is fine, you should next check that it's going to end up in the right part of the archive. On the next line of the info output, you have details about the different parts of the package, including which component, section, etc. it is expected to head into. One of the important jobs is making sure that this information is actually correct through the application of overrides.

To alter the overrides for a source package, use:

• $ queue override -c universe source ubuntustudio-menu

Where the override can be -c <component> and/or -x <section>

To alter the overrides for a binary package, use:

• $ queue override -c universe binary ubuntustudio-menu

Where the override can be -c <component>, -x <section> and/or -p <priority>

Often a binary will be in the NEW queue because it is a shared library that has changed SONAME. In this case you'll probably want to check the existing overrides to make sure anything new matches. These can be found in `~/ubuntu/indices'.

Currently a special case of this are the kernel packages, which change package names with each ABI update and build many distinct binary packages in different sections. A helper tool has been written to apply overrides to the queue based on the existing packages in hardy:

• $ kernel-overrides [-s <sourcepackage>] <oldabi> <newabi>

Binary packages are not often rejected (they go into a black hole with no automatic notifications), do, check the .deb contains files, run lintian on it and file bugs when things are broken. The binaries also need to be put into universe etc as appropriate even if the source is already there.

If you're happy with a package, and the overrides are correct, accept it with:

• $ queue accept 23712

In the case of language packs, add -M to not spam the changes lists with the new packages. You can also use queue accept binary-name which will accept it for all architectures.

3. Component Mismatches and Changing Overrides

Sadly packages just don't stay where they're put. SeedManagement details how packages get chosen for the main component, the various meta packages and presence on the CD. What it doesn't point out is that packages which fall out of the seeding process are destined for the universe component.

Every hour or so, the difference between what the seeds expect to be true and what the archive actually believes is evaluated by the component-mismatches tool, and the output placed at:

• http://people.ubuntu.com/~ubuntu-archive/component-mismatches.txt

This is split into four sections:

Source and binary promotions to main

• These are source packages currently in universe that appear to need promoting to main. The usual reasons are that they are seeded, or that a package they build has become a dependency or build-dependency of a package in main. New sources need to be processed through the UbuntuMainInclusionQueue, and have been approved before they should be promoted. Also ensure that all of their dependencies (which will be in this list) are approved as well.

Binary only promotions to main

• These are binary packages currently in universe that appear to need promoting to main, as above; except that their source package is already in main. An inclusion report isn't generally needed, though the package should be sanity checked. Especially check that all of the package's dependencies are already in main, or have been approved.

Source and binary demotions to universe

• Sources and their binaries that are currently in main but are no longer seeded or depended on by another package. These either need to be seeded explicitly, or demoted.

Binary only demotions to universe

• Binary packages in main that are no longer seeded or depended on, but the source is still to remain in main -- usually because another binary saves it. Often these tend to be -dev or -dbg packages and need to be seeded, rather than demoted; but not always.

Once you've determined what overrides need to be changed, use the change-override.py tool to do it.

To promote a binary package to main:

• $ change-override.py -c main git-email

To demote a source package and all of its binaries to universe:

• $ change-override.py -c universe -S tspc

Less-used are the options to just move a source, and leave its binaries where it is (usually just to repair a mistaken forgotten -S):

• $ change-override.py -c universe tspc
  ...oops, forgot the source...
  $ change-override.py -c universe -t tspc

and the option to move a binary and its source, but leave any other binaries where they are:

• $ change-override.py -c universe -B flite

4. Removals

4.1. Manual

Sometimes packages just need removing entirely, because they are no longer required. This can be done with:

• $ lp-remove-package.py -u $SUDO_USER -m "reason for removal" konserve

By default this removes the named source and binaries, to remove just a binary use -b:

•   $ lp-remove-package.py -u $SUDO_USER -m "NBS" -b konserve

"NBS" is a common short-hand meaning that the binary is No-longer Built by the Source.

To remove just a source, use -S.

The tool tells you what it's going to do, and asks for confirmation before doing it, so it's reasonably safe to get the wrong options and say N.

4.2. Blacklisting

If you remove source packages which are in Debian, and they are not meant to ever come back, add it to the blacklist at /srv/launchpad.net/dak/sync-blacklist.txt, document the reason, and bzr commit it with an appropriate changelog. This will avoid getting the package back to source NEW in the next round of autosyncs from Debian.

4.3. Removals in Debian

From time to time we should remove packages which were removed in Debian, to avoid accumulating cruft and unmaintained packages. This will interactively go through the removals and ask for confirmation:

• $ cd ~/syncs/
  $ update-sources
  $ process-removals

Please note that we do need to keep some packages which were removed in Debian (e. g. "firefox", since we did not do the "firefox" → "iceweasel" renaming).

5. Syncs

Syncing packages with Debian is a reasonably common request, and currently annoyingly complicated to do. The tools help you prepare an upload, which you'll still need to check and put into incoming. The following recipe takes away some of the pain:

First go to LP to see the list of current sync requests

Review the bugs, and make sure that the sync request is ACK'd (or requested by) someone with MOTU or core-dev privileges. If past FeatureFreeze, check the changelog to make sure the new version has only bug fixes and not new features.

If there are pending sync requests, change into the ~/syncs directory and make sure the Debian sources lists are up to date:

• lp_archive@...$ cd ~/syncs
  lp_archive@...$ update-sources

Now prepare the source packages to be uploaded:

• lp_archive@...$ sync-source.py -b LPUID srcpkg

Replace LPUID with the Launchpad username of the sync requester, or the acknowledger if the requester is not an active developer, and srcpkg with the names of the sources they asked for.

This will fail if there are any Ubuntu changes, make sure they've asked to override them, and use -f to override them, e.g.

• lp_archive@...$ sync-source.py -b LPUID -f dpkg

If the source comes from a non-standard component, such as 'contrib', you might need:

• lp_archive@...$ sync-source.py -b LPUID -C contrib srcpkg

You'll now have a bunch of source packages in the ~/syncs directory of the lp_archive user which need uploading. To do that, just run

• flush-syncs

To sync all the updates available in Debian

• sync-source.py -a
  NOMAILS=-M flush-syncs

This does not import new packages from Debian that were not previously present in Ubuntu. To get a list of new packages available for sync, use the command

• new-source [contrib|non-free]

which gives a list of packages that can be fed into sync-source.py on the commandline after review

To sync from Debian incoming wget the sources,

• apt-ftparchive sources ./ > Debian_incoming_main_Sources
  sync-source.py -S incoming <package>

Backports work much the same way; the tool is backport-source and it should be run in ~/backports. There's also a flush-backports tool that works the same way as flush-syncs above. Backports do not require any Sources files. Note that backporting packages which did not exist in the previous version will end up in NEW which defaults to main, so universe packages need to have that override set.

Backports should reference the Launchpad username of the backporter who approved the backport, not the user requesting the backport.

6. Useful tools

There are other useful tools in your PATH which are invaluable.

6.1. Archive state checks

madison-lite (aliased to m) examines the current state of the archive for a given binary/source package:

• $ madison-lite dpkg
        dpkg | 1.10.22ubuntu2 |         warty | source, amd64, i386, powerpc
        dpkg | 1.10.22ubuntu2.1 | warty-security | source, amd64, i386, powerpc
        dpkg | 1.10.27ubuntu1 |         hoary | source, amd64, i386, ia64, powerpc, sparc
        dpkg | 1.10.27ubuntu1.1 | hoary-security | source, amd64, i386, ia64, powerpc, sparc
        dpkg | 1.10.27ubuntu2 | hoary-updates | source, amd64, i386, ia64, powerpc, sparc
        dpkg | 1.13.10ubuntu4 |        breezy | source, amd64, hppa, i386, ia64, powerpc, sparc
        dpkg | 1.13.11ubuntu5 |        dapper | source, amd64, hppa, i386, ia64, powerpc, sparc
  
  $ madison-lite dselect
     dselect | 1.10.22ubuntu2 |         warty | amd64, i386, powerpc
     dselect | 1.10.22ubuntu2.1 | warty-security | amd64, i386, powerpc
     dselect | 1.10.27ubuntu1 |         hoary | amd64, i386, ia64, powerpc, sparc
     dselect | 1.10.27ubuntu1.1 | hoary-security | amd64, i386, ia64, powerpc, sparc
     dselect | 1.10.27ubuntu2 | hoary-updates | amd64, i386, ia64, powerpc, sparc
     dselect | 1.13.10ubuntu4 |        breezy | amd64, hppa, i386, ia64, powerpc, sparc
     dselect | 1.13.11ubuntu5 |        dapper | amd64, hppa, i386, ia64, powerpc, sparc

Or when used with -S and a source package, the source and every binary built by it:

• $ madison-lite -S dpkg
        dpkg | 1.10.22ubuntu2 |         warty | source, amd64, i386, powerpc
        dpkg | 1.10.22ubuntu2.1 | warty-security | source, amd64, i386, powerpc
        dpkg | 1.10.27ubuntu1 |         hoary | source, amd64, i386, ia64, powerpc, sparc
        dpkg | 1.10.27ubuntu1.1 | hoary-security | source, amd64, i386, ia64, powerpc, sparc
        dpkg | 1.10.27ubuntu2 | hoary-updates | source, amd64, i386, ia64, powerpc, sparc
        dpkg | 1.13.10ubuntu4 |        breezy | source, amd64, hppa, i386, ia64, powerpc, sparc
        dpkg | 1.13.11ubuntu5 |        dapper | source, amd64, hppa, i386, ia64, powerpc, sparc
    dpkg-dev | 1.10.22ubuntu2 |         warty | all
    dpkg-dev | 1.10.22ubuntu2.1 | warty-security | all
    dpkg-dev | 1.10.27ubuntu1 |         hoary | all
    dpkg-dev | 1.10.27ubuntu1.1 | hoary-security | all
    dpkg-dev | 1.10.27ubuntu2 | hoary-updates | all
    dpkg-dev | 1.13.10ubuntu4 |        breezy | all
    dpkg-dev | 1.13.11ubuntu5 |        dapper | all
    dpkg-doc | 1.10.22ubuntu2 |         warty | all
    dpkg-doc | 1.10.22ubuntu2.1 | warty-security | all
    dpkg-doc | 1.10.27ubuntu1 |         hoary | all
    dpkg-doc | 1.10.27ubuntu1.1 | hoary-security | all
    dpkg-doc | 1.10.27ubuntu2 | hoary-updates | all
     dselect | 1.10.22ubuntu2 |         warty | amd64, i386, powerpc
     dselect | 1.10.22ubuntu2.1 | warty-security | amd64, i386, powerpc
     dselect | 1.10.27ubuntu1 |         hoary | amd64, i386, ia64, powerpc, sparc
     dselect | 1.10.27ubuntu1.1 | hoary-security | amd64, i386, ia64, powerpc, sparc
     dselect | 1.10.27ubuntu2 | hoary-updates | amd64, i386, ia64, powerpc, sparc
     dselect | 1.13.10ubuntu4 |        breezy | amd64, hppa, i386, ia64, powerpc, sparc
     dselect | 1.13.11ubuntu5 |        dapper | amd64, hppa, i386, ia64, powerpc, sparc

checkrdepends lists the reverse dependencies of a given binary:

• $ checkrdepends -b nm-applet dapper

or source package:

• $ checkrdepends network-manager dapper

6.2. NEW handling

A lot of churn in NEW comes from Debian imports. Since they already went through NEW in Debian, we should not waste too much time on it, so there are some tools.

• There are often duplicate source NEWs in the queue if the auto-syncer run twice in a row without clearing the imported sources from NEW. These can be weeded out with:

   new-remove-duplicates > /tmp/$SUDO_USER/cmds
  sh /tmp/$SUDO_USER/cmds 

  (Please eyeball cmds before feeding it to the queue).

• new-binary-debian-universe creates queue commands for overriding and accepting all binary NEW packages whose source was imported from Debian and is in universe. While it runs, it lintians all the imported .debs. Watch the output and note all particularly worrisome issues. Check the cmds file for obvious errors, and when you are happy, execute it with sh cmds.

  Warning: This command will fail when there are duplicates in the queue. Clean them up with new-remove-duplicates first.

   new-binary-debian-universe > /tmp/$SUDO_USER/cmds
  vi /tmp/$SUDO_USER/cmds
  sh /tmp/$SUDO_USER/cmds 

• For bulk processing of source NEW imported from Debian you should do something like:

   cd /tmp/$SUDO_USER/
  q fetch
  for i in `ls *_source.changes| grep -v ubuntu`; do grep -q 'Changed-By: Ubuntu Archive Auto-Sync' $i || continue; egrep -q ' contrib|non-free' $i && continue ; echo "override source -c universe ${i%%_*}"; echo "accept ${i%%_*}"; done > cmds 

  Then go over the cmds list, verify on http://packages.qa.debian.org that all the packages mentioned are indeed in Debian main (and not in non-free, for example), and again feed it to the queue with q -e -f cmds.

• When unpacking a source package for source NEW checks, you should run suspicious-source. This is basically a find -type f which ignores all files with a known-safe name (such as *.c, configure, *.glade). Every file that it outputs should be checked for being the preferred form of modification, as required by the GPL. This makes it easier to spot PDFs and other binary-only files that are not accompanied by a source. The licensecheck command is also useful for verifying the license status of source packages.

6.3. Moving Packages to Updates

6.3.1. Standard case

Packages in -proposed can be moved to -updates once they are approved by someone from sru-verification, and have passed the minimum aging period of 7 days.

• copy-package.py -vbs feisty-proposed --to-suite=feisty-updates kdebase

6.3.2. Special case: DDTP updates

1. Disable publisher cron job and wait until it has finished. It must not run during the copy operation. (Alternatively, if the publisher is currently running and you know it will take some time yet to finish, you may make these changes in /srv/launchpad.net/ubuntu-archive/ubuntu/dists.new/.)

2. Copy

   /srv/launchpad.net/ubuntu-archive/ubuntu/dists/release-proposed/component/i18n/* to the corresponding -updates directory, for all relevant components. This needs to happen as user lp_publish.

3. Reenable publisher cron job.

6.3.3. Special case: debian-installer updates

1. Disable publisher cron job and wait until it has finished. It must not run during the copy operation. (Alternatively, if the publisher is currently running and you know it will take some time yet to finish, you may make these changes in /srv/launchpad.net/ubuntu-archive/ubuntu/dists.new/.)

2. Copy /srv/launchpad.net/ubuntu-archive/ubuntu/dists/release-proposed/main/installer-architecture/version to the corresponding -updates directory, for all architectures and for the version of debian-installer being copied.

3. Update /srv/launchpad.net/ubuntu-archive/ubuntu/dists/release-updates/main/installer-architecture/current to point to the version of debian-installer being copied, for all architectures.

4. Make sure that at most three versions of the installer remain in /srv/launchpad.net/ubuntu-archive/ubuntu/dists/release-updates/main/installer-architecture, for all architectures.

5. Reenable publisher cron job.

6.3.4. Resources

• Currently pending SRUs

• Verified bugs for intrepid, hardy, gutsy, dapper

6.4. Publishing security uploads from the ubuntu-security private PPA

Note that this action, unlike most archive actions, requires you to be logged in as the lp_publish user (and currently only on germanium).

Security uploads in Soyuz are first built, published, and tested in the Security Team's private PPA. To unembargo them, we use a tool that re-publishes them to the primary archive. Note that this should never be done without an explicit request from a member of the Security Team.

To publish nasm from the ubuntu-security PPA to the -security pocket of ubuntu's hardy release, you would do the following:

• LPCONFIG=production /srv/launchpad.net/codelines/ppa/scripts/ftpmaster-tools/unembargo-package.py -p ubuntu-security -d ubuntu -s hardy-security nasm

6.5. Publishing mozilla security uploads from the ubuntu-mozilla-security public PPA

Mozilla (ie, firefox and thunderbird) security uploads in Soyuz are first built, published, and tested in the Mozilla Security Team's public PPA. To publish them into the main archive, use copy-package.py. Note that this should never be done without an explicit request from a member of the Ubuntu Security Team (Mozilla Security Team is not enough).

To publish firefox-3.0 version 3.0.7+nobinonly-0ubuntu0.8.04.1 from the ubuntu-mozilla-security PPA to the -security pocket of ubuntu's hardy release, you would do the following:

• copy-package.py -b --ppa=ubuntu-mozilla-security -s hardy --to-suite hardy-security -e 3.0.7+nobinonly-0ubuntu0.8.04.1 firefox-3.0
  security-firefox-overrides -S hardy-security

The security-firefox-overrides script needs to be run because copying a package from a PPA to the ubuntu archive puts all the binaries into main.

6.6. Copying security uploads to updates

Security uploads are distributed from a single system, security.ubuntu.com (consisting of one or a small number of machines in the Canonical datacentre). While this ensures much quicker distribution of security updates than is possible from a mirror network, it places a very high load on the machines serving security.ubuntu.com, as well as inflating Canonical's bandwidth expenses very substantially. Every new installation of a stable release of Ubuntu is likely to be shortly followed by downloading all security updates to date, which is a significant ongoing cost.

To mitigate this, we periodically copy security uploads to the -updates pocket, which is distributed via the regular mirror network. (In fact, the pooled packages associated with -security are mirrored too, but mirrored -security entries are not in the default /etc/apt/sources.list to avoid causing even more HTTP requests on every apt-get update.) This is a cheap operation, and has no effect on the timely distribution of security updates, other than to reduce the load on central systems.

The copy-report tool lists all security uploads that need to be copied to -updates. If the package in question is not already in -updates, it can be copied without further checks. Otherwise, copy-report will extract the changelogs (which may take a little while) and confirm that the package in -security is a descendant of the package in -updates. If that is not the case, it will report that the package needs to be merged by hand.

The output of the tool looks like this:

$ copy-report
The following packages can be copied safely:
--------------------------------------------

copy-package.py -y -b -s feisty-security --to-suite feisty-updates -e 8.3.5-6ubuntu2.1 tk8.3
copy-package.py -y -b -s feisty-security --to-suite feisty-updates -e 8.4.14-0ubuntu2.1 tk8.4

The block of output under "The following packages can be copied safely:" may be copied and pasted in its entirety. If there is a block headed "The following packages need to be merged by hand:", then make sure that the security team is aware of those cases.

6.7. Syncs with syncbugbot

6.7.1. Purpose

If you process a long list of sync requests from Launchpad bugs, using sync-source.py manually is tedious. To automate this, there is a script syncbugbot which does the following:

• Take a list of sync request bug # and additional sync options as input.
• For each sync request bug:
  • get the source package name and requestor from Launchpad

  • Call sync-source.py with the requestor and source package name and all additional sync options from the input file

  • On success, close the bug with the output of sync-source.py.

Note that this currently only works for sync request bugs which have a package. In particular, it does not work for syncing packages which are not yet in Ubuntu, because the bug task will be against "Ubuntu" and syncbugbot cannot figure out the package name. This limitation might be addressed in an improved version of syncbugbot.

6.7.2. Steps

• Open the list of current sync requests in browser.

• Starting from the first bug which is associated to a package (see limitation above), use ctrl+mouse marking to select the column with the bug numbers. Paste them into a text file, let's call it syncs.txt.

• syncs.txt is the input to syncbugbot and must contain one line per sync request bug, with the bug number being leftmost. Everything after the bug number are extra options to sync-source.py which get passed to it unmodified.

• Now open all the sync requests (in browser tabs) and walk through them:

  • Delete bug # from syncs.txt which are not approved or invalid. Set those to "Incomplete" in Launchpad, and provide necessary followup.

  • Use rmadison -u debian to verify the component to sync from (often, requestors get it wrong, or unstable got a newer version than experimental since the sync request was made)

  • Add appropriate sync options, e. g. if package has Ubuntu changes or needs to be synced from exerimental.

• Copy file to cocoplum and run it:

    cd ~/syncs
    update-sources
    syncbugbot < /tmp/syncs.txt
    flush-syncs

  If you are not an archive admin with shell access to cocoplum, hand the file to someone who has.

6.7.3. sync-source.py options

The most common options are:

• Option	Description	Default
  -f, --force	Overwrite Ubuntu changes	abort if Ubuntu package has modifications
  -S suite	Sync from particular suite (distrorelease), e. g. experimental	unstable
  -C component	Sync from particular component, e. g. non-free	main

6.8. Backports with syncbugbot

Since backports are very similar to syncs, syncbugbot can also be used to do those. It needs to get the source package name passed, though, since backport requests are not filed against source packages, but against release-backports products.

6.8.1. Steps

• Open the list of current backport requests for a particular release (this URL is for hardy) in browser. Note that this URL only lists bugs being "in progress", since that's what the backporters team will set when approving backports.

• Use ctrl+mouse marking to select the column with the bug numbers. Paste them into a text file, let's call it backports-hardy.txt.

• backports-hardy.txt is the input to syncbugbot and must contain one line per backport request bug, with the bug number being leftmost and the source package name being second. Everything after the bug number are extra options to backport-source.py which get passed to it unmodified.Do not mix backports for different target releases in one file.

• Now open all the backport requests (in browser tabs) and walk through them:

  • Delete bug # from backport.txt which are invalid. Set those to "Incomplete" in Launchpad, and provide necessary followup.

  • Check with rmadison if the current version is still the same that was approved and tested. If there is a newer one, set back to "Incomplete" and mention the newer version.

  • If a backport requires an actual upload due to source changes, these need to be approved differently. Remove the bug from backports-hardy.txt, but do not change the bug report.

  • Add appropriate backport options to backports-hardy.txt, e. g. if package should not be backported from the current development release.

• Copy file to cocoplum and run it:

    cd ~/backports
    syncbugbot --backport=hardy < /tmp/backports-hardy.txt
    flush-backports

  If you are not an archive admin with shell access to cocoplum, hand the file to someone who has.

6.8.2. backport-source.py options

The most common options are:

• Option	Description	Default
  -S suite	Backport from particular suite (distrorelease), e. g. intrepid	current development release

6.8.3. Example input file

12345 lintian
23456 frozen-bubble -S intrepid

6.9. Diffs for unapproved uploads

The "unapproved" queue holds packages while a release is frozen, i. e. while a milestone or final freeze is in progress, or for post-release updates (like hardy-proposed). Packages in these queues need to be scrutinized before they get accepted.

This can be done with the queuediff tool in lp:~ubuntu-archive/ubuntu-archive-tools/trunk, which generates a debdiff between the current version in the archive, and the package sitting in the unapproved queue:

$ queue-diff -s hardy-updates hal
$ queue-diff -b human-icon-theme | view -

-s specifies the release pocket to compare against and defaults to the current development release. Please note that the pocket of the unapproved queue is not checked or regarded; i. e. if there is a hal package waiting in hardy-proposed/unapproved, but the previous version already migrated to hardy-updates, then you need to compare against hardy-updates, not -proposed.

Check --help, the tool has more options, such as specifying a different mirror, or -b to open the referred Launchpad bugs in the webbrowser.

This tool works very fast if the new package does not change the orig.tar.gz, then it only downloads the diff.gz. For native packages or new upstream versions it needs to download both tarballs and run debdiff on them. Thus for large packages you might want to do this manually in the data center.

7. Useful runes

This section contains some copy&paste shell bits which ease recurring jobs.

7.1. Cleaning up NBS

Sometimes binary packages are not built by any source (NBS) any more. This usually happens with library SONAME changes, package renamings, etc. Those need to be removed from the archive from time to time, and right before a release, to ensure that the entire archive can be rebuilt by current sources.

Such packages are detected by archive-cruft-check.py /srv/launchpad.net/ubuntu-archive/. Apart from NBS packages it also prints out 'ASBA' ("Arch: all" superseded by "Arch: any"), but they are irrelevant for day-to-day archive administration. This tool does not check for reverse dependencies, though, so you should use checkrdepends -b for checking if it is safe to actually remove NBS packages from the archive:

As a first step, create a work directory and a list of all packages (one file per package) which are NBS and check their reverse dependencies:

•  mkdir /tmp/$SUDO_USER/cruft
  cd /tmp/$SUDO_USER/cruft
  for i in $(archive-cruft-check.py /srv/launchpad.net/ubuntu-archive/ 2>&1| grep '^ *o ' | sed 's/^.*://; s/,//g'); do checkrdepends -b $i hardy > $i; done 

Replace hardy with the name of the current development release. This will take a long time, so consider using screen. Please note that this list is generated automatically twice a day.

Those packages which do not have any reverse dependencies can be removed safely in one go:

•  for p in $(find -empty | sed 's_^./__'); do lp-remove-package.py -yb -u $SUDO_USER -m "NBS" $p; rm $p; done

The rest needs to be taken care of by developers, by doing transition uploads for library SONAME changes, updating build dependencies, etc. The remaining files will list all the packages which still need the package in question.

Please refrain from removing NBS kernel packages for old ABIs until debian-installer and the seeds have been updated, otherwise daily builds of alternate and server CDs will be made uninstallable.

7.2. partner archive

The Canonical partner archive is in a distro of its own, ubuntu-partner.

Queue is much the same

• queue -s hardy info

Use -j to remove a package

• lp-remove-package.py -u jr -m "request Brian Thomason" -d ubuntu -s feisty realplay -j

Please get sign-off from the Ubuntu QA team (via Steve Beattie) before accepting packages into partner.

8. reprocess-failed-to-move

In some cases, binary packages fail to move from the incoming queue to the accepted queue. To fix this, run ~lp_buildd/reprocess-failed-to-move as lp_buildd

9. Stable release updates

Archive admins manually need to process StableReleaseUpdates. Run the pending-sru script to 'queue fetch' all currently unapproved uploads. Review them according to the following guidelines:

• Reject uploads which do not conform to the StableReleaseUpdates policy. If the changelog refers to a bug number, follow up there with an explanation.

• Only process an upload if the SRU team approved the update in the bug report trail.
• Verify that the package delta matches the debdiff attached to the bug report and that there are no other unrelated changes.

• If you accept a package into -proposed,

  1. Add a verification-needed tag to the bug report.

  2. Set the appropriate bug task to Status: Fix Committed.

  3. Subscribe the sru-verification team.

• After the package in -proposed has been successfully tested and passed a minimum aging period of 7 days (check the status page), and is approved by the SRU verification team, the package should be moved to -updates:

  1. Use copy-package.py to copy the source and binary packages from -proposed to -updates.

  2. Set the bug task to Status: Fix Released.

10. Useful web pages

Equally useful to the tools are the various auto-generated web pages in ubuntu-archive's public_html that can give you a feel for the state of the archive.

http://people.ubuntu.com/~ubuntu-archive/component-mismatches.txt

• As described above, this lists the differences between the archive and the output of the germinate script. Shows up packages that are in the wrong place, or need seeding.

http://people.ubuntu.com/~ubuntu-archive/germinate-output/

• This is the output of the germinate script, split up into each release of each flavour of ubuntu.

http://people.ubuntu.com/~ubuntu-archive/priority-mismatches.txt

• Shows discrepancies between priorities of packages and where they probably should go according to the seeds.

http://people.ubuntu.com/~ubuntu-archive/architecture-mismatches.txt

• Shows override discrepancies between architectures, which are generally bugs.

http://people.ubuntu.com/~ubuntu-archive/testing/karmic_probs.html

• Generated by the hourly run of britney and indicates packages that are uninstallable on karmic, usually due to missing dependencies or problematic conflicts.

http://people.ubuntu.com/~ubuntu-archive/testing/karmic_outdate.html

• Lists differences between binary and source versions in the archive. This often shows up both build failures (where binaries are out of date for particular architectures) but also where a binary is no longer built from the source.

http://people.ubuntu.com/~ubuntu-archive/NBS/

• This contains a list of binary packages which are not built from source (NBS) any more. The files contain the list of reverse dependencies of those packages (output of checkrdepends -b). These packages need to be removed eventually, thus all reverse dependencies need to be fixed. This is updated twice a day.

11. Chroot management

Please note that chroot management is something generally handled by Canonical IS (and specifically by Adam Conrad). The following section documents the procedures required should one have to, for instance, remove all the chroots for a certain suite to stop the build queue in its tracks while a breakage is hunted down and fixed, but please don't take this as an open invitation to mess with the buildd chroots willy-nilly.

Soyuz stores one chroot per (suite, archictecture).

manage-chroot.py, which runs only as 'lp_buildd' in cocoplum or cesium, allows the following actions upon a specified chroot:

$ sudo -u lp_buildd -i
lp_buildd@cocoplum:~$ LPCONFIG=ftpmaster /srv/launchpad.net/codelines/current/scripts/ftpmaster-tools/manage-chroot.py
ERROR   manage-chroot.py <add|update|remove|get>

Downloading (get) an existing chroot:

$ manage-chroot.py [-s SUITE] <-a ARCH> get

The chroot will be downloaded and stored in the local disk name as 'chroot-<DISTRIBUTION>-<SERIES>-<ARCHTAG>.tar.bz2'

Uploading (add/update) a new chroot:

$ manage-chroot.py [-s SUITE] <-a ARCH> add -f <CHROOT_FILE>

'add' and 'update' action are equivalents. The new chroot will be immediatelly used for the next build job in the corresponding architecture.

Disabling (remove) an existing chroot:

Unless you have plans for creating a new chroots from scratch, it's better to download them to disk before the removal (recover is possible, but involves direct DB access)

$ manage-chroot.py [-s SUITE] <-a ARCH> remove

No builds will be dispatched for architectures with no chroot, the build-farm will continue functional for the rest of the system.

12. Archive days

Current members with regular admin days are:

• Monday: SteveLangasek, JamesWestby

• Tuesday: JonathanRiddell

• Wednesday: DustinKirkland (syncs, bug processing)

• Thursday, SteveKowalik

• Friday: JamieStrandboge

On an archive day, the following things should be done:

• If we are not yet in the DebianImportFreeze, run sync-source.py -a to sync unmodified packages from Debian (see Syncs).

• Process all pending archive bugs. Most of those are syncs, removals, component fixes, but there might be other, less common, requests.

• Process the NEW queues of the current development release and *-backports of all supported stable releases.

• Run process-removals to review/remove packages which were removed in Debian.

• Clean up component-mismatches, and poke people to fix dependencies/write MIRs.

• Look at http://people.ubuntu.com/~ubuntu-archive/testing/karmic_probs.html, fix archive-admin related issues (component mismatches, etc.), and prod maintainers to fix package related problems.

• Remove NBS packages without reverse dependencies, and prod maintainers to rebuild/fix packages to eliminate reverse dependencies to NBS packages.

12.1. Archive Administration and Freezes

Archive admins should be familiar with the FreezeExceptionProcess, however it is the bug submitter's and sponsor's responsibility to make sure that the process is being followed. Some things to keep in mind for common tasks:

• When the archive is frozen (ie the week before a Milestone, or from one week before RC until the final release), you need an ACK from ubuntu-release for all main/restricted uploads

• During the week before final release, you need an ACK from motu-release for any uploads to universe/multiverse

• When the archive is not frozen, bugfix-only sync requests can be processed if filed by a core-dev, ubuntu-dev or motu (universe/multiverse only) or have an ACK by a sponsor from one of these groups, ubuntu-main-sponsors or ubuntu-universe-sponsors

• After FeatureFreeze, all packages in main require an ACK from ubuntu-release for any FreezeException (eg FeatureFreeze, UserInterfaceFreeze, and Milestone) and an ACK from motu-release for universe/multiverse

• New packages in universe/multiverse need two ACKs after FeatureFreeze

See FreezeExceptionProcess for complete details.